Subsurface flow measurements using passive flux meters in variably-saturated cold-regions landscapes

To date, passive flux meters have predominantly been applied in temperate environments for tracking the movement of contaminants in groundwater. This study applies these instruments to reduce uncertainty in (typically instantaneous) flux measurements made in a low-gradient, wetland dominated, discontinuous permafrost environment. This method supports improved estimation of unsaturated and over-winter subsurface flows which are very difficult to quantify using hydraulic gradient-based approaches. Improved subsurface flow estimates can play a key role in understanding the water budget of this landscape.     

日照市土壤地球化学元素分布规律及成因探讨

在日照市开展多目标区域地球化学调查，获取了表层土壤和深层土壤地球化学数据，通过对获得的地球化学参数进行统计分析，确定了日照市土壤地球化学基准值和背景值，认为日照市除部分元素或指标外，大部分元素或指标土壤地球化学基准值和背景值与全省土壤地球化学基准值和背景值接近。研究发现，日照市As，Cd，Cr，Cu，Hg，Ni，Pb，Zn等8种重金属元素背景值含量低于国家土壤环境质量标准的土壤一级标准限值，日照市土壤质量基本保持自然背景水平；而受工业化生产和城市化建设等后期人为活动影响，日照市表层土壤中Cd，C，Hg，N，P，S，Se，Corg等元素或指标出现明显富集，应引起重视。     

Solution for a plane strain rough‐walled hydraulic fracture driven by turbulent fluid through impermeable rock

The impact of turbulent flow on plane strain fluid‐driven crack propagation is an important but still poorly understood consideration in hydraulic fracture modeling. The changes that hydraulic fracturing has experienced over the past decade, especially in the area of fracturing fluids, have played a major role in the transition of the typical fluid regime from laminar to turbulent flow. Motivated by the increasing preponderance of high‐rate, water‐driven hydraulic fractures with high Reynolds number, we present a semianalytical solution for the propagation of a plane strain hydraulic fracture driven by a turbulent fluid in an impermeable formation. The formulation uses a power law relationship between the Darcy‐Weisbach friction factor and the scale of the fracture roughness, where one specific manifestation of this generalized friction factor is the classical Gauckler‐Manning‐Strickler approximation for turbulent flow in a rough‐walled channel. Conservation of mass, elasticity, and crack propagation are also solved simultaneously. We obtain a semianalytical solution using an orthogonal polynomial series. An approximate closed‐form solution is enabled by a choice of orthogonal polynomials embedding the near‐tip asymptotic behavior and thus giving very rapid convergence; a precise solution is obtained with 2 terms of the series. By comparison with numerical simulations, we show that the transition region between the laminar and turbulent regimes can be relatively small so that full solutions can often be well approximated by either a fully laminar or fully turbulent solution.     

Geostatistical features of streambed vertical hydraulic conductivities in Frenchman Creek Watershed in Western Nebraska

This study evaluated the spatial variability of streambed vertical hydraulic conductivity (K_v) in different stream morphologies in the Frenchman Creek Watershed, Western Nebraska, using different variogram models. Streambed K_v values were determined in situ using permeameter tests at 10 sites in Frenchman, Stinking Water and Spring Creeks during the dry season at baseflow conditions. Measurements were taken both in straight and meandering stream channels during a 5 day period at similar flow conditions. Each test site comprised of at least three transects and each transect comprised of at least three K_v measurements. Linear, Gaussian, exponential and spherical variogram models were used with Kriging gridding method for the 10 sites. As a goodness-of-fit statistic for the variogram models, cross-validation results showed differences in the median absolute deviation and the standard deviation of the cross-validation residuals. Results show that using the geometric means of the 10 sites for gridding performs better than using either all the K_v values from the 93 permeameter tests or 10 K_v values from the middle transects and centre permeameters. Incorporating both the spatial variability and the uncertainty involved in the measurement at a reach segment can yield more accurate grid results that can be useful in calibrating K_v at watershed or sub-watershed scales in distributed hydrological models.     

双酶法制备低黏度辛烯基琥珀酸淀粉钠的工艺条件

对双酶法制备用作微胶囊壁材的低黏度辛烯基琥珀酸淀粉钠的工艺路线与工艺条件进行了研究。正交实验结果表明 ,在酯化淀粉乳质量浓度 2 0 %、每 g淀粉α 淀粉酶的用量为 6SKBU的条件下 ,影响产品性能的各因素中 ,糖化酶的用量对产品的DE值和流度的影响最大 ,各因素的重要性依次是 :糖化酶的用量、糖化酶作用时间、α 淀粉酶保温作用时间。最佳工艺条件是 :α 淀粉酶保温作用时间 4min ,每 g淀粉糖化酶用量 0 .2GAU ,糖化酶作用时间 2 .5h ,此时产品的DE值为 30 ,流度为 80左右     

Size and shape evolution of pores in a viscoplastic matrix under compression

The frequent use of soils and earth materials for hydraulic capping and for geo‐environmental waste containment motivated our interest in detailed modelling of changes in size and shape of macro‐pores to establish links between soil mechanical behaviour and concurrent changes in hydraulic and transport properties. The objective of this study was to use finite element analysis (FEA) to test and extend previous analytical solutions proposed by the authors describing deformation of a single macro‐pore embedded in linear viscoplastic soil material subjected to anisotropic remote stress. The FEA enables to consider more complex pore geometries and provides a detailed picture of matrix yield behaviour to explain shortcomings of approximate analytical solutions. Finite element and analytical calculations agreed very well for linear viscous as well as for viscoplastic materials, only limited for the case of isotropic remote stress due to the simplifications of the analytical model related to patterns and onset of matrix‐yielding behaviour. FEA calculations were compared with experimental data obtained from a compaction experiment in which pore deformation within a uniform modelling clay sample was monitored using CAT scanning. FEA predictions based on independently measured material properties and initial pore geometry provided an excellent match with experimentally determined evolution of pore size and shape hence lending credence to the potential use of FEA for more complex pore geometries and eventually connect macro‐pore deformation with hydraulic properties. Copyright © 2006 John Wiley & Sons, Ltd.     

基于遥感技术对黄河口水色与岸线季相变化特征研究

使用Landsat-5 TM 2004年11月24日与2005年5月13日黄河口遥感影像,配合准同期外业实测资料,进行黄河口水体水色物质叶绿素a与悬浮泥沙的动态反演与河口岸线解译.研究表明由于秋末与春初黄河上游来水物质含量的差异,上述悬浮指标值存在显著的季相差异.根据样值与光谱特征建立的反演模型得出的反演值与实测值有平均在0.85以上的相关关系,具有很好的反演效果.岸线解译成果表明,黄河口岸线演变迅速,在河流平枯水量时期仍然具有较强的变化,岸线推进尤以新河口附近显著.这表明,使用遥感手段是进行河口生态环境质量监测的有效手段,是进行岸线动态变化研究的一种基本技术支撑手段.     

凤太矿田层控铅锌(铜)矿床的成矿物质来源探讨

秦岭凤太矿田层控铅锌(铜)矿床的金属物质、硫和成矿溶液主要来自深部基底的岩石,属海底喷流—沉积成因矿床。从这一理论认识出发可进一步分析控矿地质条件及今后在该区有效地寻找同类矿床。     

Motive force of Qinghai-Tibet Plateau moving to east

A calculation formula on spherical pattern of Qinghai-Tibet plateau moving model is established. Tibet massif moves norward by east in speed of 28 mm/a, Ganshu-Qinghai massif moves to northeast in speed of 15 mm/a, Qomolangma Feng moves northward by a few east in speed of 35 ～42 mm/a. The low latitude perimeter is longer than the nigh latitude perimeter. When the Tibet massif moves northward, its latitude perimeter must be contracted and the Tibet massif must move eastward by Coriolis. Coriolis force is inertial in earth rotation. It makes the fall body turning to east and the rising block turning westward. In the Northern Hemisphere, it makes the northward body turning to east and the southward block turning to west.This is the reason why the tectonic zones of western Pacific are different from those of eastern Pacific.     

Biaxial test simulations using a packing of polygonal particles

The mechanical response of cohesionless granular materials under monotonic loading is studied by performing molecular dynamic simulations. The diversity of shapes of soil grains is modelled by using randomly generated convex polygons as granular particles. Results of the biaxial test obtained for dense and loose media show that samples achieve the same void ratio at large strains independent of their initial density state. This limit state resembles the so‐called critical state of soil mechanics, except for some stress fluctuations, which remain for large deformations. These fluctuations are studied at the micro‐mechanical level, by following the evolution of the co‐ordination number, force chains and the fraction of the sliding contacts of the sample. Copyright © 2007 John Wiley & Sons, Ltd.