基于纹理特征的围填海SAR图像分水岭分割方法

本文提出了一种基于纹理特征的围填海SAR图像分水岭分割方法,首先对机载MiniSAR图像进行灰度共生矩阵纹理滤波,获得纹理特征图像,再对纹理特征图像进行分水岭算法分割,将获得的形态学重建图像进行门限阈值分割,得到最后的二值化分割结果。该方法一方面通过调整灰度共生矩阵纹理滤波的窗口大小,抑制了斑点噪声的影响;另一方面,利用分水岭算法对边缘模糊杂乱图像的优势,提高了围填海信息提取的准确性。实验结果表明,本方法对高分辨率SAR图像围填海监测图像的分割效果良好。     

Wave energy conversion under constrained wave-by-wave impedance matching with amplitude and phase-match limits

This paper investigates an approach to limit the fullness of ‘tuning’ provided by wave-by-wave impedance matching control of wave energy devices in irregular waves. A single analytical formulation based on the Lagrange multiplier approach of Evans [1] is used to limit the velocity amplitude while also limiting the closeness of the phase match between velocity and exciting force. The paper studies the effect of the present technique in concurrently limiting the device velocity and the required control/actuation force. Time domain application requires wave-profile prediction, which here is based on a deterministic propagation model. Also examined in the time domain is the effect of possible violation of the displacement constraint, which for many designs implies impacts at hard stops within the power take-off mechanism. Time domain simulations are carried out for a 2-body axisymmetric converter (with physical end-stops) in sea states reported for a site off the US east coast. It is found that the approach leads to effective power conversion in the less energetic sea states, while as desired, considerable muting of the optimal response is found in the larger sea states. Under the assumptions of this work, the end-stop collisions are found to have a minor effect on the power conversion. The present approach could be used to guide the design of power take-off systems so that their displacement stroke, maximum force, and resistive and reactive power limits are well-matched to the achievable performance of a given controlled primary energy converter.     

A time-varying parameter model of a body oscillating in pitch

Among the assumptions upon which linear time-invariant models of floating bodies are based is that the body motions are so small that any change in the body’s angular position can be disregarded. However, it is often a major design requirement of a wave energy conversion device that the response amplitude is large, thereby invalidating one of the assumptions of the linear model. In particular, the immersed geometry of a body undergoes considerable variation when it is moved in pitch. With regard to this we investigate the difference in performance between a quasi-linear model in which the change of immersed surface is modelled by time-varying parameters and a basic linear model in which the immersed surface is time-invariant. The time-varying parameter model is realized by interpolation between the appropriate parameter values of a set of linear time-invariant (LTI) models derived for the different immersed surfaces that occur at discrete body displacements. It is shown that the responses predicted using the time-varying parameter model are closer to those measured experimentally than those of a standard frequency-domain model. Particular improvement occurs when the responses are large, such as at or near the resonance frequency. A problem which may limit the general use of the model is also discussed.     

应用于砂岩型铀矿找矿的遥感-航测信息集成模型构建

应用遥感-航测(航放和航磁)信息集成技术,针对砂岩型铀矿找矿的几个重要条件:如盆地内部构造、含矿目的层、水文条件和矿化条件,构建了构造、岩性、水文和矿化4种信息集成模型.将这4种信息集成模型应用于示范区,在已知的矿化地段得到的结果与实际勘探的成果符合较好,提高了预测的准确性.     

不同激光扫描数据组拼接的一种新方法

激光扫描测量技术在三维城市建模领域的应用具有良好的发展前景。但是,不同精度的扫描数据组的拼接是目前需要解决的主要问题之一,本文对不同精度的数据组的拼接进行了实验性研究,并提出了一种新方法。     

一种改进的基于坡度变化的机载激光雷达点云滤波方法

机载激光点云数据滤波是获取高精度数字表面模型和数字高程模型的关键。本文分析了几种重要的滤波算法,在研究基于坡度变化的滤波算法的基础上,提出一种改进的分块滤波处理的方法。实验表明:该方法能有效对点云数据进行分类。     

航空重力测量数学模型及其测量精度分析

基于数学和分析力学角度分别推导了航空矢量重力测量的数学模型,得到了一致的模型公式;给出了矢量模型的3个分量形式,其中垂直方向的分量就是标量重力测量的数学模型;简要介绍了我国研制成功的航空标量重力测量系统CHAGS的数据处理的过程,分析了标量重力测量中测线交叉点和重复测线的重力异常的精度;根据实测数据计算的结果表明:测线交叉点重力异常不符值的标准差约为5×10-5ms-2左右,重复测线的内符合精度优于5×10-5ms-2,达到了预期的要求。     

基于DOA和TOA的机载单站无源定位

研究可对地面固定目标进行定位跟踪的机载单站无源定位方法,建立二维等效定位模型,利用DOA和TOA信息建立状态方程及测量方程,经过扩展卡尔曼滤波算法进行定位及跟踪。通过计算机仿真结果验证,该方法稳定、有效,且可达到相当的精度。     

利用卫星影像和航空影像更新基础地理信息方法研究

基础地理信息的更新,是保证地理信息系统现势性的充要条件.卫星遥感影像数据具有周期短、信息丰富、现势性强等特征.利用卫星影像数据来更新基础地理信息数据是一种行之有效的方法.如何利用遥感数据融合技术,将多传感器获取的各种影像数据中所含的信息优势有机地结合起来,更是成为目前研究的热点.利用航空影像和Landsat多光谱波段影像进行数据融合,能够有效地提高影像空间分辨率,以获取更高质量的信息.     

Optimal Model for Geoid Determination from Airborne Gravity

Two different approaches for transformation of airborne gravity disturbances, derived from gravity observations at low-elevation flying platforms, into geoidal undulations are formulated, tested and discussed in this contribution. Their mathematical models are based on Green's integral equations. They are in these two approaches defined at two different levels and also applied in a mutually reversed order. While one of these approaches corresponds to the classical method commonly applied in processing of ground gravity data, the other approach represents a new method for processing of gravity data in geoid determination that is unique to airborne gravimetry. Although theoretically equivalent in the continuous sense, both approaches are tested numerically for possible numerical advantages, especially due to the inverse of discretized Fredholm's integral equation of the first kind applied on different data. High-frequency synthetic gravity data burdened by the 2-mGal random noise, that are expected from current airborne gravity systems, are used for numerical testing. The results show that both approaches can deliver for the given data a comparable cm-level accuracy of the geoidal undulations. The new approach has, however, significantly higher computational efficiency. It would be thus recommended for real life geoid computations. Additional errors related to regularization of gravity data and the geoid, and to accuracy of the reference field, that would further deteriorate the quality of estimated geoidal undulations, are not considered in this study.