风和径流量对长江口缺氧影响的数值模拟

受自然和人类活动的影响，海洋缺氧现象日益严重，威胁着海洋生态环境，海洋缺氧问题已经引起了人们的广泛关注。本文应用区域海洋模式并耦合生态模式，对东海的生态系统进行了数值模拟和分析研究。与观测数据比较显示，该模型能较好地模拟长江口外生态变量的分布趋势。另外本文通过设置不同敏感性实验，探讨风和径流量对长江口底层缺氧现象的影响，结果分析表明，风和径流量对长江口外缺氧区的形成有显著的影响。径流量变化虽然对长江口外缺氧区的季节变化影响并不显著，但是对缺氧区域面积却存在显著的影响。径流量增加，水体层化增强，表层叶绿素浓度增加，最终导致缺氧区域范围扩展；径流量减小，水体层化减弱，表层叶绿素浓度减小，缺氧区域范围缩小。风向和风速的改变不仅影响长江口外缺氧区的季节变化，还影响缺氧区域面积。     

基于SODA资料的南海表层风能输入的空间分布与长期趋势研究

海面风不仅是驱动上层海洋运动的主要动力, 其能量也是维持海洋表层流动的主要机械能来源。为了分析南海表层流风能输入的变化, 用SODA(Simple Ocean Data Assimilation)(1901—2010)资料估算了风向南海表层流(表层地转流+表层非地转流)的能量输入。结果表明, 风向南海表层流、表层地转流和表层非地转流输入的能量总体均呈减少趋势, 110年间分别减小了约56%、65%和49%。导致风能输入减小的最主要因素是风应力的减弱(减小了35%)。由于南海受季风系统的控制, 风向表层流及其各成分输入的能量呈现出显著的季节性变化。冬季风能输入最强, 高值区位于南海西部及北部区域, 呈一个显著的“回力镖”状结构。这些结果对深入认识南海环流具有理论意义。     

基于圆柱多段拟合的隧道中轴线提取方法研究

提出基于圆柱多段拟合的隧道中轴线提取方法。首先对隧道点云数据进行预处理，并将点云按隧道走向分成不同区段；然后对各区段依据轴线与表面点云法线垂直关系，提取精度较低的中轴线；最后对各区段利用圆柱多段拟合，提取精度较高的中轴线。实验表明，隧道中轴线的提取在一定的采样区间具有较高的稳定性，对直线和弯曲的圆形隧道有良好的适用性，算法可靠，精度较高。     

乌兰布和沙漠典型植物群落土壤风蚀可蚀性研究

为探明植被恢复对乌兰布和沙漠土壤风蚀可蚀性的影响，以乌兰布和沙漠内不同沙地固 定阶段的 8 种典型植物群落及群落内表土作为研究对象，对土壤物理因子（可蚀性颗粒含量、土壤 含水量、有机质含量）、土壤结皮因子、植被因子 3 类土壤风蚀可蚀性因子指标进行监测，分析土壤 风蚀可蚀性因子在不同植物群落类型间、沙地固定阶段间的差异。结果表明：（1）在乌兰布和沙漠 典型植物群落中，沙蓬、沙生针茅、盐爪爪等草本植物群落的土壤风蚀可蚀性最强，白刺、梭梭、沙 冬青等灌木植物群落土壤风蚀可蚀性弱于草本植物群落，说明灌木林能显著降低土壤风蚀作用。 （2）随着沙地的不断固定，土壤结构不断发育，土壤可蚀性不断降低，土壤风蚀可蚀性强弱表现为 固定沙地<半固定沙地<流动沙地。（3）土壤可蚀性颗粒含量、土壤有机质含量、土壤含水量、土壤结 皮、植被因子与植被类型及沙地固定阶段具有显著相关关系。因此，在沙区生态建设工程中，为了 减少土壤风蚀量，不仅要考虑物种的选择，还要促进人工生态系统的演替和恢复，从而有效降低土 壤风蚀可蚀性。研究结果可为乌兰布和沙区植被生态系统服务功能的科学评价、防沙治沙工程的 建设与管理提供一定参考。     

敦煌-格尔木铁路沿线风动力环境特征

敦煌-格尔木铁路沿线地形复杂、起沙因素多变、沙源丰富，沙害问题日益严重。目前对其风沙活动规律还未有研究，不利于防沙工作的开展。为此，通过对自北向南的5个观测点（S1、S2、S3、S4、S5）风速和风向的观测、计算和分析，利用平均风速、起沙风况及输沙势对敦格铁路沿线的风动力环境特征进行研究。结果表明：S5、S4和S3的风况对铁路风沙灾害防治意义较大。S5年平均风速、起沙风频率和输沙势最大，春季风沙活动最为强烈，且风向单一、风力强劲，风沙运动方向基本与铁路垂直，沙粒易在铁路附近堆积。S4夏季风沙活动最为强烈；S3春季风沙活动最为强烈，且风向单一，S4和S3的风沙运动方向与铁路夹角小于90°，附近沙源广阔，铁路易受风沙侵蚀，阻碍交通运营。     

一种有发展前景的隧道及井巷超前预报技术——电磁导弹探测技术

对于隧道和煤矿井巷的安全掘进 ,超前预报显得特别重要。但由于掌子面前的特殊环境限制及多种干扰的严重影响 ,给隧道及井巷超前预报技术的研究带来许多困难。在瞬变电磁理论的基础上 ,引入新的电磁传播理论———电磁导弹技术 ,作为对该技术的初步探索 ,文章论证了该技术在隧道超前预报中应用的可能性 ,并提出了研究的主要内容和发展方向以及可能取得的新的技术突破和技术支撑     

隧道工程地质评价的内容和方法

结合工程隧道实际,首先阐述了隧道工程的基本地质环境和工程地质条件,然后针对隧道工程可能出现的不良地质现象和可采取的工程措施,从大气降水、围岩稳定、围岩压力、洞口稳定、隧道比选等角度探讨隧道工程地质评价的主要方法和一般内容,进行隧道工程地质评价,为隧道施工、支护提供了依据.     

Strain localization in sand: an overview of the experimental results obtained in Grenoble using stereophotogrammetry

Experimental results are presented from the extensive program of drained plane strain compression tests on sand carried out in Grenoble over the last two decades. Systematic analysis of photographs of the deforming specimen allowed for measuring deformations and determining strain fields throughout the test, that is: prior to, at, and after the onset of strain localization. The principles, details and accuracy of the procedure are described, as well as its suitability to properly depict the patterns of deformation. Findings concerning the occurrence and progression of strain localization are discussed. The issues of shear band orientation and thickness are addressed, as well as temporary and persistent complex localization patterns, and the volumetric behaviour inside a band after its formation. The influence of such variables as initial state of the sand (effective stress and relative density), specimen size and slenderness, as well as grain size, is discussed. Copyright © 2004 John Wiley & Sons, Ltd     

Bond rolling resistance and its effect on yielding of bonded granulates by DEM analyses

A discrete element modelling of bonded granulates and investigation on the bond effect on their behaviour are very important to geomechanics. This paper presents a two‐dimensional (2‐D) discrete element theory for bonded granulates with bond rolling resistance and provides a numerical investigation into the effect of bond rolling resistance on the yielding of bonded granulates. The model consists of mechanical contact models and equations governing the motion of bonded particles. The key point of the theory is that the assumption in the original bond contact model previously proposed by the authors (55th CSCE‐ASCE Conference, Hamilton, Ont., Canada, 2002; 313–320; J. Eng. Mech. (ASCE) 2005; 131 (11):1209–1213) that bonded particles are in contact at discrete points, is here replaced by a more reliable assumption that bonded particles are in contact over a width. By making the idealization that the bond contact width is continuously distributed with the normal/tangential basic elements (BE) (each BE is composed of spring, dashpot, bond, slider or divider), we establish a bond rolling contact model together with bond normal/tangential contact models, and also relate the governing equations to local equilibrium. Only one physical parameter β needs to be introduced in the theory in comparison to the original bond discrete element model. The model has been implemented into a 2‐D distinct element method code, NS2D. Using the NS2D, a total of 86 1‐D, constant stress ratio, and biaxial compressions tests have been carried out on the bonded granular samples of different densities, bonding strengths and rolling resistances. The numerical results show that: (i) the new theory predicts a larger internal friction angle, a larger yielding stress, more brittle behaviour and larger final broken contact ratio than the original bond model; (ii) the yielding stress increases nonlinearly with the increasing value of β, and (iii) the first‐yield curve (initiation of bond breakage), which define a zone of none bond breakage and which shape and size are affected by the material density, is amplified by the bond rolling resistance in analogous to that predicted by the original bond model. Copyright © 2006 John Wiley & Sons, Ltd.     

Acceleration of anomalous cosmic rays at the heliospheric termination shock

Astronomy Letters - The acceleration of anomalous cosmic rays (ACRs) at the heliospheric termination shock and their influence on the shock structure and location are analyzed in terms of a...