A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.     

Strain localization in sand: an overview of the experimental results obtained in Grenoble using stereophotogrammetry

Experimental results are presented from the extensive program of drained plane strain compression tests on sand carried out in Grenoble over the last two decades. Systematic analysis of photographs of the deforming specimen allowed for measuring deformations and determining strain fields throughout the test, that is: prior to, at, and after the onset of strain localization. The principles, details and accuracy of the procedure are described, as well as its suitability to properly depict the patterns of deformation. Findings concerning the occurrence and progression of strain localization are discussed. The issues of shear band orientation and thickness are addressed, as well as temporary and persistent complex localization patterns, and the volumetric behaviour inside a band after its formation. The influence of such variables as initial state of the sand (effective stress and relative density), specimen size and slenderness, as well as grain size, is discussed. Copyright © 2004 John Wiley & Sons, Ltd     

三峡重庆库区深部地球物理特征与断裂构造

为了深入研究三峡重庆库区岩石圈动力学特征及其对断裂构造活动的控制和影响．并为之提供基础资料，为三峡重庆库区地震、地质灾害的监测与防治提供基础依据，在已有地球物理资料的基础上，从综合地球物理研究角度出发，通过实测地震测线资料的再解释．采用新的处理技术方法，对本区的东西向主剖面和南北向支测线的地震测深资料进行二维射线追踪处理、Pg波成像；选用场分离技术、位移数字成像技术重新处理了重力和航磁资料，通过联合反演来建立深部二维构造剖面，对剖面所揭示的基底构造特征和地壳结构特征、主要断裂构造特征以及莫霍面的起伏特征进行了精细分析和细致研究．从地球物理平面场特征出发建立了岩石圈构造三维框架。研究结果表明，这样的研究思路准确、方法得当．结论可靠；沿该剖面，把可解译的断裂分为Ⅲ级：Ⅰ级为超岩石圈断裂；Ⅱ级为壳断裂；Ⅲ级为盖层断裂。依据地球物理特征，准确揭示了库区的断裂构造特征，达到了预期效果。     

A focal plane detector design for a wide-band Laue-lens telescope

The energy range above 60 keV is important for the study of many open problems in high energy astrophysics such as the role of Inverse Compton with respect to synchrotron or thermal processes in GRBs, non thermal mechanisms in SNR, the study of the high energy cut-offs in AGN spectra, and the detection of nuclear and annihilation lines. Recently the development of high energy Laue lenses with broad energy bandpasses from 60 to 600keV have been proposed for a Hard X ray focusing Telescope (HAXTEL) in order to study the X-ray continuum of celestial sources. The required focal plane detector should have high detection efficiency over the entire operative range, a spatial resolution of about 1mm, an energy resolution of a few keV at 500keV and a sensitivity to linear polarization. We describe a possible configuration of the focal plane detector based on several CdTe/CZT pixelated layers stacked together to achieve the required detection efficiency at high energy. Each layer can operate both as a separate position sensitive detector and polarimeter or work with other layers to increase the overall photopeak efficiency. Each layer has a hexagonal shape in order to minimize the detector surface required to cover the lens field of view. The pixels would have the same geometry so as to provide the best coupling with the lens point spread function and to increase the symmetry for polarimetric studies.     

Transformation of Lambert Conic Conformal Coordinates from a Global Datum to a Local Datum

This paper treats the problem of how to transform from global datum, for example, from the International Terrestrial Reference System (ITRS), to a local datum, for example, regional or national, for the practical case of the Lambert projection of the sphere or the ellipsoid-of-revolution to the cone. We design the two projection constants n(ϕ₁, ϕ₂) and m(ϕ₁) for the Universal Lambert Conic projection of the ellipsoid-of-revolution. The task to transform from a global datum with respect to the ellipsoid-of-revolution E_A,B² to local datum with respect to the alternative ellipsoid-of-revolution E_a,b², without local ellipsoidal height, is solved by an extended numerical example. Ideas in this paper could be of interest to those working with maps and coordinates transformation from global geodetic datum to local geodetic datum and vice versa, under the Universal Lambert Conic projection, and applicable to precise positioning and navigation, boundary demarcation and determination in the marine environment.     

泥石流平面形态的统计分析

泥石流扇的平面形态可用规划的几何图形来模拟。在研究了中国西南地区小江流域和意大利东北部阿尔卑斯山区的５２个泥石流扇的基础上，本文提出了两种泥石流扇的平面形态：中国西南地区的“等腰三角形＋半圆形”泥石流扇和意大利东北部的“几何扇”。用统计分析建立了两组泥石流扇和泥石流流域之间的形态度量关系。通过两个研究区域的对比，两个流域参数：流域面积和主沟比降确定为影响泥石流扇平面形态和面积的最重要的因素。     

龙口平均海平面变化原因的研究

本文通过对实测海平面高度的对比，发现龙口平均海平面从１９９１年起有明显的升高趋势。作者猜测此乃龙口在码头扩建后有系统下沉所致。     

海岸带专题地图编绘相关问题

海岸带是影响人类活动的重要地带，海岸带专题地图能够详细表示出海岸带的特性。随着海洋经济的发展，海岸图的需求日益增加。从地图的数学要素出发，提出目前海岸图绘制存在的问题，并从地图学、海洋学、遥感地学的角度，对地图投影的选择、坐标系转换、比例尺对海岸图编绘的影响及控制点的确定等问题进行了综合分析。     

激光扫描点云图像背景交互式滤除

激光扫描系统获取的数据中包含了大量背景信息,给信息提取和表面重建工作带来严重影响,需要有效滤除。依据空间点与平面的位置关系,提出了针对车载激光扫描点云图像背景信息滤除的有效方法,并以OpenGL为工具,开发了一系列点云数据处理工具,能快速、直观、准确地滤除无用背景信息,完整地保留有用的前景信息,从而为大规模三维场景快速重建提供保障。     

高斯投影公式的机助推导

随着GPS应用的普及,高斯投影在测量中出现的机会越来越多。许多文献上都给出了推导过程,这个推导过程的运算量是非常大的,而且计算精度难于提高。经过研究,一种易于编程的递推公式被发现,虽然这个公式在计算量上没有减少,但是可以较好地解决精度问题。