Hydrological management strategies for the control of algal blooms in regulated lowland rivers

Reservoirs of lowland floodplain rivers with eutrophic backgrounds cause variations in the hydrological and hydraulic conditions of estuaries and low-dam reservoir areas, which can promote planktonic algae to proliferate and algal bloom outbreaks. Understanding the ecological effects of variations in hydrological and hydraulic processes in lowland rivers is important for algal bloom control. In this study, the middle and lower reaches of the Han River, China, a typical regulated lowland river with a eutrophic background, are selected. Based on the effect of hydrological and hydraulic variability on algal blooms, a hydrological management strategy for river algal bloom control is proposed. The results showed that (a) differences in river morphology and background nutrient levels cause significant differences in the critical threshold flow velocities for algal bloom outbreaks between natural river and low-dam reservoir sections; there is no uniform threshold flow velocity for algal bloom control. (b) There are significant differences in the river hydrological/hydraulic conditions between years with and without algal blooms. The average river flow, water level and velocity in years with algal blooms are significantly lower than those in years without algal blooms. (c) For different river sections where algal blooms occur and to meet the threshold flow velocities, the joint operation of cascade reservoirs and diversion projects is an effective method to prevent and control algal blooms in regulated lowland rivers. This study is expected to deepen our understanding of the ecological significance of special hydrological processes and guide algal bloom management in regulated lowland rivers.     

Study of the flood control scheduling scheme for the Three Gorges Reservoir in a catastrophic flood

The Three Gorges Project is the world's largest water conservancy project. According to the design standards for the 1,000‐year flood, flood diversion areas in the Jingjiang reach of the Yangtze River must be utilized to ensure the safety of the Jingjiang area and the city of Wuhan. However, once these areas are used, the economic and life loss in these areas may be very great. Therefore, it is vital to reduce this loss by developing a scheme that reduces the use of the flood diversion areas through flood regulation by the Three Gorges Reservoir (TGR), under the premise of ensuring the safety of the Three Gorges Dam. For a 1,000‐year flood on the basis of a highly destructive flood in 1954, this paper evaluates scheduling schemes in which flood diversion areas are or are not used. The schemes are simulated based on 2.5‐m resolution reservoir topography and an optimized model of dynamic capacity flood regulation. The simulation results show the following. (a) In accord with the normal flood‐control regulation discharge, the maximum water level above the dam should be not more than 175 m, which ensures the safety of the dam and reservoir area. However, it is necessary to utilize the flood diversion areas within the Jingjiang area, and flood discharge can reach 2.81 billion m³. (b) In the case of relying on the TGR to impound floodwaters independently rather than using the flood diversion areas, the maximum water level above the dam reaches 177.35 m, which is less than the flood check level of 180.4 m to ensure the safety of the Three Gorges Dam. The average increase of the TGR water level in the Chongqing area is not more than 0.11 m, which indicates no significant effect on the upstream reservoir area. Comparing the various scheduling schemes, when the flood diversion areas are not used, it is believed that the TGR can execute safe flood control for a 1,000‐year flood, thereby greatly reducing flood damage.     

GEOGRAPHY ON THE PLANETS: GIFT OF REMOTE SENSING*

Extraterrestrial geography has become a reality, as we move from Earth's moon to the planets. A broad-scale regional physiography is being established on twenty planets and satellites through remote sensing techniques. Spacecraft images yield most of the information on Solar System landscapes. Topographic measurements are extracted by monoscopic image-processing, stereophotogrammetry, and radar analysis. Invisible parts of the spectrum furnish non-topographic data.     

交通流量分析与实时最优控制

通过将车流量的增大或减小转化为路长权重的变化。将交通流量的动态问题转化为静态问题，用解决最短路问题的Dijkstra方法，给出交通流量实时最优控制的可行性模型及其有效算法。     

应用GPS观测青藏高原东北缘应力场变化

采用各向同性弹性地球模型推导了地面位移场速率与地壳内任意点应力场变化的边界积分关系,同时利用青藏高原东北缘1999～2001年观测的GPS资料对观测区地壳深度为5 km和25 km的主应力和最大剪应力进行了计算分析.结果表明,青藏高原东北缘的主应力变化主要集中在祁连山断裂、海原断裂等,在1920～1954年间历史上发生过多次震级为7.0～8.5级强震的断裂附近,并具有主应力变化沿断层走向分布、最大剪应力沿断层走向交替变化等特征.     

滇西动态重力网的分形特征及空间分辨力

介绍了用分形学描述地球物理观测网非均匀分布和联合应用分形特征与Ｓｈａｎｎｏｎ定理确定最佳网格距的方法。研究了滇西动态重力网的分形特征，它的分形维Ｄｆ＝１．２７，最佳网格距ｒ０＝２８ｋｍ。讨论了１９８６年至１９９４年间网区发生的８次Ｍｓ＞５．０级地震前重力场变化的可信性，指出这些变化的波长均大于１００ｋｍ，至少２倍于网的最小空间分辨力，因而是可信的     

Damage identification method using harmonic excitation force considering both modelling and measurement errors

A method of structural damage identification using harmonic excitation force is presented. It considers the effects of both measurement and modelling errors in the baseline finite element model. Damage that accompanies changes in structural parameters can be estimated for a damaged structure from the change between measured vibration responses and ones calculated from the analytical model of the intact structure. In practice, modelling errors exist in the analytical model due to material and geometric uncertainties and a reduction in the degrees of freedom as well as measurement errors, making identification difficult. To surmount these problems, bootstrap hypothesis testing, which enables statistical judgment without information about these errors, was introduced. The method was validated by numerical simulation using a three‐dimensional frame structure and real vibration data for a three‐storey steel frame structure. Copyright © 2005 John Wiley & Sons, Ltd.     

自动高精度测距系统

介绍了自动高精度测距系统。该系统能以５×１０－７的测距精度测定多个观测点的形变，可作为跨断层动态连续观测的新仪器。     

LAMOST总控系统程序设计

国家重大科学工程项目LAMOST总控系统的程序设计是一个庞大的软件工程．其总控系统下共包括8个既相互独立又互有关联的子系统．如何通过良好的软件设计方法来处理好这8个子系统之间的关系使其协调运转，以及如何确保软件开发的可维护性、可持续性是研究重点．     

基于专家系统决策的多模式控制及其应用

将专家系统技术与常规控制、模糊控制、超前控制、仿人智能操作控制以及计算机控制技术相结合,设计了一种新的基于专家系统决策的多模式控制(MCDBES)。经试验和实际运行结果表明,MCDBES系统对未知数学模型的被控对象,具有良好的控制性能。本文提出的MCDBES已成功地应用于燃油陶瓷窑炉计算机控制系统。