2007-2017年中国沙尘气溶胶的三维分布特征及输送过程

利用最新发布的CALIPSO产品，构建了2007-2017年中国沙尘气溶胶的三维分布，并结合HYSPLIT-4模式和再分析数据，探讨了沙尘的三维输送过程。结果表明：中国的沙尘排放源区主要是塔克拉玛干沙漠和巴丹吉林沙漠，沙尘气溶胶出现频率分别为60%和35%。塔克拉玛干沙漠排放的沙尘主要（50%~70%）停留在源地0~6 000 m高度，少部分向东输送至甘肃和内蒙古；巴丹吉林沙漠排放的沙尘则主要向东输送。中国沙尘排放量在春季最大，向东输送最强；夏季，东亚夏季风限制了沙尘向东输送；秋季，沙尘排放减弱，输送强度和夏季相当；沙尘排放量在冬季最小，输送最弱。夏季，沙尘在输送过程中可被抬升至高度5 000 m以上，春季次之，秋、冬季的沙尘主要在低层大气输送。沙尘在向东输送的过程中被抬升并和当地人为污染物混合变为污染性沙尘，华北地区污染性沙尘出现频率高达30%；输送到海洋的沙尘也会与洋面上（0~3 000 m高度）的海盐气溶胶混合，出现频率约为10%。     

参附注射液建立自发性高血压病大鼠肝阳上亢证模型的研究

目的：探讨参附注射液建立自发性高血压大鼠（SHR）模型的可能性。方法：将30只3月龄SPF级健康雄性自发性高血压大鼠称重，随机分为SHR组，附子汤组，参附注射液低、中、高剂量组，每组6只。各组采用对应药物灌胃进行模型制备，另取同品系同周龄雄性魏-凯二氏大鼠（WKY）6只作为正常对照组（WKY组）。观察参附注射液对SHR大鼠24h饮水量、易激惹程度、痛阈、睑结膜充血及收缩压的影响。结果：附子汤组及参附注射液中、高剂量组造模后均出现了易激惹程度增高、睑结膜充血程度增高、饮水量增多、痛阈降低、收缩压升高等肝阳上亢的表现，与WKY组及SHR组比较，差异有统计学意义（P<0.05)，表明造模成功。结论：参附注射液可以制备新型高血压肝阳上亢证模型，但是具体造模机制以及造模药物用量需待进一步探讨确定。     

广州城市流浪乞讨者的空间管治与日常生活实践

以广州流浪乞讨者为研究对象,通过深度访谈等质性研究方法,解读针对流浪乞讨者的空间管治政策与手段,分析流浪乞讨者的日常生活实践与生境协商。研究发现：在地方城市政策对流动性与公共秩序限制的双重压力下,在流浪乞讨者的日常生活实践中,不仅有针对管治行动者而刻意为之的特殊营建,亦有基于程式化生活流程对自我身份认同的重塑与真情实感的展演。地方政府基于空间目标的救助与真实存在的日常生活实践存在着一种张力。研究关注了城市边缘群体日常生活对地理意义的主动塑造过程,对全面理解并规范管理中国城市流浪乞讨现象具有借鉴意义。     

A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.     

Retrieving volume FeO and TiO_2 abundances of lunar regolith with CE-2 CELMS data using BPNN method

The volume FeO and TiO_2 abundances(FTAs) of lunar regolith can be more important for understanding the geological evolution of the Moon compared to the optical and gamma-ray results. In this paper, the volume FTAs are retrieved with microwave sounder(CELMS) data from the Chang'E-2 satellite using the back propagation neural network(BPNN) method. Firstly, a three-layered BPNN network with five-dimensional input is constructed by taking nonlinearity into account. Then, the brightness temperature(TB) and surface slope are set as the inputs and the volume FTAs are set as the outputs of the BPNN network.Thereafter, the BPNN network is trained with the corresponding parameters collected from Apollo, Luna,and Surveyor missions. Finally, the volume FTAs are retrieved with the trained BPNN network using the four-channel TBderived from the CELMS data and the surface slope estimated from Lunar Orbiter Laser Altimeter(LOLA) data. The rationality of the retrieved FTAs is verified by comparing with the Clementine UV-VIS results and Lunar Prospector(LP) GRS results. The retrieved volume FTAs enable us to re-evaluate the geological features of the lunar surface. Several important results are as follows. Firstly, very-low-Ti(1.5 wt.%) basalts are the most spatially abundant, and the surfaces with TiO_2 5 wt.% constitute less than 10% of the maria. Also, two linear relationships occur between the FeO abundance(FA) and the TiO_2 abundance before and after the threshold, 16 wt.% for FA. Secondly, a new perspective on mare volcanism is derived with the volume FTAs in several important mare basins, although this conclusion should be verified with more sources of data. Thirdly, FTAs in the lunar regolith change with depth to the uppermost surface,and the change is complex over the lunar surface. Finally, the distribution of volume FTAs hints that the highlands crust is probably homogeneous, at least in terms of the microwave thermophysical parameters.     

Directional interpolation infinite element for dynamic problems in saturated porous media

In this study, a directional interpolation infinite element suited to a saturated porous medium is presented to account for dynamic problems with semi-infi     

Study of the flood control scheduling scheme for the Three Gorges Reservoir in a catastrophic flood

The Three Gorges Project is the world's largest water conservancy project. According to the design standards for the 1,000‐year flood, flood diversion areas in the Jingjiang reach of the Yangtze River must be utilized to ensure the safety of the Jingjiang area and the city of Wuhan. However, once these areas are used, the economic and life loss in these areas may be very great. Therefore, it is vital to reduce this loss by developing a scheme that reduces the use of the flood diversion areas through flood regulation by the Three Gorges Reservoir (TGR), under the premise of ensuring the safety of the Three Gorges Dam. For a 1,000‐year flood on the basis of a highly destructive flood in 1954, this paper evaluates scheduling schemes in which flood diversion areas are or are not used. The schemes are simulated based on 2.5‐m resolution reservoir topography and an optimized model of dynamic capacity flood regulation. The simulation results show the following. (a) In accord with the normal flood‐control regulation discharge, the maximum water level above the dam should be not more than 175 m, which ensures the safety of the dam and reservoir area. However, it is necessary to utilize the flood diversion areas within the Jingjiang area, and flood discharge can reach 2.81 billion m³. (b) In the case of relying on the TGR to impound floodwaters independently rather than using the flood diversion areas, the maximum water level above the dam reaches 177.35 m, which is less than the flood check level of 180.4 m to ensure the safety of the Three Gorges Dam. The average increase of the TGR water level in the Chongqing area is not more than 0.11 m, which indicates no significant effect on the upstream reservoir area. Comparing the various scheduling schemes, when the flood diversion areas are not used, it is believed that the TGR can execute safe flood control for a 1,000‐year flood, thereby greatly reducing flood damage.     

Numerical Simulation of the Vortex-Induced Vibration of A Curved Flexible Riser in Shear Flow

A series of fully three-dimensional(3 D) numerical simulations of flow past a free-to-oscillate curved flexible riser in shear flow were conducted at Reynolds number of 185–1015. The numerical results obtained by the two-way fluid–structure interaction(FSI) simulations are in good agreement with the experimental results reported in the earlier study. It is further found that the frequency transition is out of phase not only in the inline(IL) and crossflow(CF) directions but also along the span direction. The mode competition leads to the non-zero nodes of the rootmean-square(RMS) amplitude and the relatively chaotic trajectories. The fluid–structure interaction is to some extent reflected by the transverse velocity of the ambient fluid, which reaches the maximum value when the riser reaches the equilibrium position. Moreover, the local maximum transverse velocities occur at the peak CF amplitudes, and the values are relatively large when the vibration is in the resonance regions. The 3 D vortex columns are shed nearly parallel to the axis of the curved flexible riser. As the local Reynolds number increases from 0 at the bottom of the riser to the maximum value at the top, the wake undergoes a transition from a two-dimensional structure to a 3 D one. More irregular small-scale vortices appeared at the wake region of the riser, undergoing large amplitude responses.     

基于概率积分法的采动坡体稳定性预测与分析

地下采煤会引起地表沉降、变形,甚至引发山体、河堤滑坡等地质灾害。采动坡体的稳定性研究一直是采矿工程中实际关心的问题。该文首先介绍分析了概率积分法移动变形稳态、动态预测模型以及基于极限平衡理论的单滑面采动坡体稳定性预测模型,提出了使用概率积分法结合Knothe时间函数对采动坡体稳定性进行预测分析的方法,并使用C#及XML Schema语言编制了相关的计算程序。最后,结合一个工程实例对采动坡体稳定性和动态变化过程进行了预测与分析,通过实测数据验证了提出方法的可行性,得出了采动引起的坡体下沉是影响坡体稳定性的主要因素,并提出了在坡体拉伸阶段进行注浆加固的方法。     

Influence of Stress on Void Ratios of Compacted Crushed Rock Masses in Coal Mine Gobs

The transfer and evolution of stress among rock blocks directly change the void ratios of crushed rock masses and affect the flow of methane in coal mine gobs. In this study, a Lagrange framework and a discrete element method, along with the soft-sphere model and EDEM numerical software, were used. The compaction processes of rock blocks with diameters of 0.6, 0.8, and 1.0 m were simulated with the degrees of compression set at 0%, 5%, 10%, 15%, 20%, and 25%. This study examines the influence of stress on void ratios of compacted crushed rock masses in coal mine gobs. The results showed that stress was mainly transmitted downward through strong force chains. As the degree of compression increased, the strong force chains extended downward, which resulted in the stress at the upper rock mass to become significantly higher than that at the lower rock mass. It was determined that under different degrees of compression, the rock mass of coal mine gobs could be divided, from the bottom to the top, into a lower insufficient compression zone (ICZ) and an upper sufficient compression zone (SCZ). From bottom to top, the void ratios in the ICZ sharply decreased and those in the SCZ slowly decreased. Void ratios in the ICZ were 1.2–1.7 times higher than those in the SCZ.