延边东部五道沟岩群的单颗粒锆石SHRIMP U-Pb 年代学及其地质意义

通过对延边地区东部五道沟岩群黑云阳起石片岩的单颗粒锆石SHRIMP U-Pb年龄测定.获得21个单点年龄,其中包括7组谐和年龄和1组不谐和年龄.谐和年龄分别为1347.8 Ma、844.8 Ma、340.2～313.7 Ma(平均值为323±23 Ma,N=4,MSWD=0.23,置信度=0.88)、292.9～288.3 Ma(平均值=291±25 Ma,N=3,MSWD=0.031.置信度=0.86)、279.2～266.2 Ma(平均值为279±28 Ma,N=4,MSWD=0.031,置信度=0.86)、127.4～124.2 Ma(206Pb/208U年龄平均值为126.5±3.7 Ma,N=5,MSWD=0.12;置信度=O.97)、116.1～106.3 Ma(平均值为115±39 Ma,N=2,MSWD=1.2置信度=0.27),不谐和年龄的下交点年龄为(451±120)Ma、上交点年龄为(1811±400)Ma(MSWD=7.2);这一结果表明:阳起石片岩的原岩主要是来自中元古代、新元古代和早古生代的碎屑物,指示五道沟群的沉积成岩作用发生在石炭世(323±23 Ma),变质作用发生在晚二叠世(291±25 Ma),之后在279.2～266.2 Ma、126.5～106.3 Ma先后受两次岩浆用和蚀变作用的改造.     

McCreary和Fickian湍扩散形式差异的分析

用矩阵方法,求解McCreary和Fickian铅垂向湍扩散形式下,无界海洋条件时在风应力和深层浮力作用下的线性解。得出不同的湍扩散系数A情况下McCreary与Fickian湍扩散形式的流场结构。指出随湍扩散系数的增加,McCreary和Fickian湍扩散形式下u分量结构及其量值差异增大。在Fickian湍扩散形式下,能量穿越密度跃层的传递能力较强。当A=0.1cm~2s~(-3)时,在风应力和深层浮力作用下两种湍扩散形式造成流场的差异很小。提出在小湍扩散系数下,用McCreary湍扩散形式研究热带海洋环流,其结果和Fickian形式应相当一致。     

Estimating the minimum in-stream flow requirements via wetted perimeter method based on curvature and slope techniques

Under the assumptions of triangular cross section channel and uniform stable flow, an analytical solution of the minimum ecological in-stream flow requirement (MEIFR) is deduced. Based on the analytical solution, the uncertainty of the wetted perimeter method is analyzed by comparing the two techniques for the determination of the critical point on the relationship curve between wetted perimeter, P and discharge, Q. It is clearly shown that the results of MEIFR based on curvature technique (corresponding to the maximum curvature) and slope technique (slope being 1) are significantly different. On the P-Q curve, the slope of the critical point with the maximum curvature is 0.39 and the MEIFR varied prominently with the change of the slope threshold. This indicates that if a certain value of the slope threshold is not available for slope technique, curvature technique may be a better choice. By applying the analytical solution of MEIFR in the losing rivers of the Western Route South-to-North Water Transfer Project in China, the MEIFR value via curvature technique is 2.5%-23.7% of the multi-year average annual discharge, while that for slope technique is 11%-105.7%. General conclusions would rely on the more detailed research for all kinds of cross-sections.     

基于土质边坡塑性极限分析条分法的可靠度计算方法研究

从土塑性极限分析上限定理出发,以土质边坡塑性极限分析条分法为基础,在引入可靠性分析方法(JC法)后,建立了土质边坡塑性极限分析条分法可靠度极限状态方程,并推导得到了塑性极限分析条分法可靠度计算公式。这种方法实现了定值计算向不确定性计算的转变,同时可靠度指标的计算结果具有概率的意义。     

The BLAST-CODE model - A Computer-Aided Bench Blast Design and Simulation System

Blast design is a critical factor dominating fragmentation and cost of actual bench blasts. However, due to the varying nature of rock properties and geology as well as free surface conditions, reliable theoretic formulae are still unavailable at present and in most cases blast design is carried out by personal experience. As an effort to find a more scientific and reliable tool for blast design, a computer-aided bench blast design and simulation system, the BLAST-CODE model, is developed for Shuichang surface mine, Mining Industry Company of the Capital Iron and Steel Corporation Beijing. The BLAST-CODE model consists of a database representing geological and topographical conditions of the mine and the modules Frag + and Disp + for blast design and prediction of resultant fragmentation and displacement of rock mass. The two modules are established in accordance with cratering theory qualitatively and modified quantitatively by regression of the data collected from 85 bench blasting practices conducted in 3 mines of the Shuichang surface mine. Blasting parameters are selected based upon quantitative and comprehensive evaluation on the effect of the factors such as rock properties, geology, free surface conditions and detonation characteristics of the explosive products in use. In order to ensure practicality and reliability of the system, the BLAST-CODE model allows automatic adjustment to the selected parameters such as burden B and spacing S as well as explosive charge amount Q of any blasthole under irregular topographic and/or varying blastability conditions of the rock mass to be blasted. Simulation of the BLAST-CODE model includes prediction of fragmentation and displacement that are demonstrated in terms of swell factor, characteristic rock size x c and size distribution coefficient n by Rossin-Ramler's equation, and 3-dimentional muck pile profile. The BLAST-CODE model also permits interactive parameter selection based on comparison of the predicted fragmentation and displacement as well as the cost for drilling, explosives, and accessories until the most effective option can be selected.     

1999年台湾7.6级大震与江苏-南黄海地区中强震预测

分析讨论了台湾地区7级大震与本区中强震之间相关关系，指出1999年台湾7.6级大震后2－3年内，本区将有5－6级中强震发生。同时应用可公度模型和“带头地震”的异年倍九法联合对本区中强震发震时间进行分析预测。结论表明，该方法可以较好地应用于本区短临地震预报实践。     

南黄海海域M≥6强震趋势预测及其论证分析研究

南黄海地区是我国东部中强地震活动最为活跃的地区之一,自1846年以来,该研究区M≥6强震活动具有显著的可公度性和有序性,其主要有序值为74~75 a、57~58 a、11~12 a和5~6 a,其中74~75 a和57~58 a具有突出的预测作用.根据翁文波信息预测理论,在回顾总结成功预测1996年11月9日南黄海6.1级强震的基础上,深入研究了南黄海海域M≥6强震活动的可公度性及其预测功能,构建并完善了南黄海海域M≥6强震的二维和三维有序网络结构,对该区未来M≥6强震趋势进行了预测,并对预测的可能性与合理性进行了论证分析.研究结论表明：南黄海海域未来新一轮强震活跃幕的首次M≥6强震将发生在2053-2054年前后,未来第2次M≥6强震或强震群可能发生在2058-2059年前后.     

渝东北地区五峰组—龙马溪组页岩气地质特征及其勘探方向探讨

渝东北地区五峰组—龙马溪组暗色泥页岩沉积厚度介于30.92~164.47m之间,其中在朝阳镇咸池剖面及田坝一带厚度最大,往研究区东西两侧具有减薄的趋势。全区总有机碳含量平均3.32%,中部(平均3.93%)和西部(平均3.59%)相对东部(平均2.77%)具有更高的有机质丰度。有机质以I型腐泥型为主,西部个别剖面及东部栗子坪一带夹少量Ⅱ_1—Ⅱ_2型干酪根,其成熟度普遍处于高成熟—过成熟阶段,呈现自北向南升高的趋势。石英、脆性矿物含量普遍较高(尤其是中西部区块),黏土矿物较低,更易产生储气裂缝及利于后期压裂。储层特征方面,中部地区泥页岩具有更高的孔隙度和较低的渗透率,同时比表面积也相对更高,以有机质孔隙为主。中部区块田坝—朝阳—文峰一带含气性最好,结合页岩厚度、总有机碳含量分布、储层条件及构造保存条件分析,本区中部区块田坝—朝阳—文峰一带具有更好的页岩气勘探前景,是该区下一步勘探的重点区域。     

巴音戈壁盆地南部塔木素铀矿床水岩作用特征及其与铀成矿关系研究

在较封闭的环境中,塔木素铀矿床高矿化度(平均矿化度为35.4 g/L)NaCl型地下水中的Na+替换了斜长石中的Ca2+,使斜长石由更长石(An≈13)转变为钠长石(An≈1),被替换出的Ca_2+(以CaO计,约占斜长石总质量的4.5%)与地下水中的HCO_3~-、CO_3~(2-)及Mg~(2+)等结合形成了白云石等碳酸盐胶结物。在此过程中发生了脱碳作用,促使地下水中以[UO_2(CO_3)_3]~(4-)、[UO_2(CO_3)_3]~(2-)等碳酸铀酰络合离子及Mg CO_3·Na_2UO_2(CO_3)_2复盐发生分离而形成了铀的沉淀,并受扩散作用影响,水中的铀趋向于向水岩作用相对强烈地段迁移,从而促使铀在特定的层位集中、富集。同时,斜长石因水岩作用(溶解、溶蚀等),在解理面及表面形成了次生的缝隙及孔洞等,为铀沉淀提供了空间。成岩后,含SO_4~(2-)等的酸性地表水沿层间下渗,溶解了砂岩中碳酸盐胶结物而形成了溶洞,为后期再次迁移的铀提供了沉淀空间,并形成了铀的进一步叠加、富集。     

柴北缘腹部深层异常高孔-渗储层成因分析

根据钻井岩芯及铸体薄片鉴定结果,结合扫描电镜、物性统计及测、录井资料,探讨了柴北缘腹部埋深大于3 000 m的异常高孔-渗储层的形成原因及主控因素。结果表明深部异常高孔-渗储层主要分布在古近系下干柴沟组,是一套辫状河三角洲到滨-浅湖沉积,粒度较细,以粉砂岩和细砂岩为主,岩性为长石岩屑砂岩和岩屑长石砂岩。孔隙类型以原生粒间孔为主,其次为次生溶蚀孔隙和少量裂隙,孔-喉匹配性好。深部异常高孔-渗带主要受控于沉积环境,后期成岩作用和异常高压系统也促使了优质储层的形成。古近系下干柴沟组发育的辫状河三角洲分流河道砂体和滨-浅湖砂体具有良好的成分成熟度和结构成熟度,泥质杂基含量较低,是形成优良储层的基础条件;早期碳酸盐胶结物和高含量的刚性颗粒在深埋过程中有效抵御了压实作用对孔隙的破坏;储集层上、下部发育大套厚层泥岩,在沉积成岩过程中泥岩层内流体排出受阻而滞留在孔隙空间内,孔隙流体承担了部分负荷从而削弱了正常压实作用对中间砂岩层的影响,保存了大部分原生孔隙,在柴北缘腹部深层形成了优质碎屑岩储层。