Damage identification method using harmonic excitation force considering both modelling and measurement errors

A method of structural damage identification using harmonic excitation force is presented. It considers the effects of both measurement and modelling errors in the baseline finite element model. Damage that accompanies changes in structural parameters can be estimated for a damaged structure from the change between measured vibration responses and ones calculated from the analytical model of the intact structure. In practice, modelling errors exist in the analytical model due to material and geometric uncertainties and a reduction in the degrees of freedom as well as measurement errors, making identification difficult. To surmount these problems, bootstrap hypothesis testing, which enables statistical judgment without information about these errors, was introduced. The method was validated by numerical simulation using a three‐dimensional frame structure and real vibration data for a three‐storey steel frame structure. Copyright © 2005 John Wiley & Sons, Ltd.     

Active spreading and hydrothermalism in North Fiji Basin (SW Pacific). Results of Japanese French Cruise Kaiyo 87

The aim of the Japanese-French Kaiyo 87 cruise was the study of the spreading axis in the North Fiji Basin (SW Pacific). A Seabeam and geophysical survey allowed us to define the detailed structure of the active NS spreading axis between 16° and 22° S and its relationships with the left lateral motion of the North Fiji Fracture Zone. Between 21° S and 18°10′ S, the spreading axis trends NS. From 18°10 S to 16°40 S the orientation of the spreading axis changes from NS to 015°. North of 16°40′ S the spreading axis trends 160°. These two 015° and 160° branches converge with the left lateral North Fiji fracture zone around 16°40′ S to define an RRFZ triple junction. Water sampling, dredging and photo TV deep towing give new information concerning the hydrothermal activity along the spreading axis. The discovery of hydrothermal deposits associated with living communities confirms this activity.     

Electron microscopy studies of akermanites (Ca1−xSrx)2CoSi2O7 with modulated structure

Single crystals of akermanite (Ca_1–x Sr _x )₂Co-Si₂O₇ solid solution were grown in nitrogen by the floating zone method using a lamp-image furnace. The grown crystals were 6 mm in diameter by 50 mm in length. Microprobe analyses indicate uniform strontium content x except in the initially crystallized part. Synthetic crystals with x from 0.0 to 0.3 give, at room temperature, satellite reflections and circular diffuse scatterings in the electron diffraction pattern, which are related to an incommensurate phase and microdomains, respectively. With increasing Sr content the wavelength of a modulation increases and the intensity of satellites decreases, but the intensity of circular diffuse scattering increases up to x=0.15 and then decreases until eventually the satellites and the circular diffuse scatterings disappear at x = 0.3. The circular diffuse scattering is explained by the cluster model for the transition state, proposed by De Ridder et al. (1976).     

Geomorphological study on a clastic accretionary prism: The Nankai Trough

Abstract The Nankai Trough, off southwest Japan, is one of the best sites for the study of geomorphic characteristics of a clastic accretionary prism. A recent multibeam survey over the central and eastern parts of the Nankai accretionary prism has revealed a large variation of the topography along the trough axis. Analysis of the bathymetric data suggests the existence of prism deformational features of different scales, such as depressions, embayment structures and cusps. These structures are the results of slope instability caused by basement relief of subducted oceanic plate. Unstable slopes recover by new accretion and development of a low angle thrust. Small-scale deformation due to the subduction of a small isolated seamount is then adjusted to the regional trend. By contrast, a 30 km indentation of the wedge observed in the eastern part of the Nankai Trough, the Tenryu Cusp, has seemed to retain its geometry. The subducted Philippine Sea plate has deformed greatly near the eastern end of the Nankai Trough, because of the collision between the Izu-Ogasawara (Bonin) arc and central Japan. Therefore, the indentation may be the result of the continuous subduction of a basement high, such as the Zenisu Ridge, which has been formed under north-south compression due to the arc-arc collision.     

Geochemical study of the redistribution of elements in soil—I. Evaluation of degree of weathering of transported soil materials by distribution of major elements among the particle size fractions and soil extract

Sixteen alluvial and terrace soils from Japan and Thailand were separated into six fractions ; an amorphous sesquioxide and combined organic matter fraction, crystalline sesquioxides, clay, silt, fine sand and coarse sand. Content of ten major and minor elements in these six fractions was analyzed; SiO₂, A1₂O₃, Fe₂O₃, MgO, CaO, K₂O, TiO₂, Rb₂O and SrO were determined by X-ray fluorescence spectrometry, and Na₂O was determined by neutron activation analysis. The clay, silt, fine sand and coarse sand mineralogy were estimated semi-quantitatively by X-ray diffraction methods.We propose three indices of geochemical maturity for the soils and test their usefulness as measures of the degree of weathering. Three concomitant factors are proposed to measure the relative resistate, hydrolyzate and oxidate nature of the major elements in the soils.     

Geochemical and isotopic characteristics of the Cretaceous Orikabe Plutonic Complex,Kitakami Mountains,Japan: magmatic evolution in a zoned pluton and significance of a subduction-related mafic parental magma

The Orikabe Plutonic Complex, northeast Japan, is a zoned pluton and one of the Cretaceous intrusions in the Circum-Pacific area. In the Main body, K-rich calc-alkaline rocks composed of marginal gabbro and a large amount of monzodiorite–quartz monzonite–monzogranite are intruded successively by innermost calc-alkaline rocks of granodiorite. The gabbro and monzodiorite–monzogranite have a continuous chemical variation, while the granodiorite has lower concentrations of K, Rb, Y, Zr, Nb and F at the same SiO₂ content. The gabbro and monzodiorite–quartz monzonite have a Rb-Sr whole-rock age of 119±12 Ma with an initial ⁸⁷Sr/⁸⁶Sr ratio of 0.70392±0.00007. The initial ⁸⁷Sr/⁸⁶Sr ratio of the innermost granodiorite is estimated to be about 0.7042. The ¹⁸O values of fresh rocks range from +6.7 to +8.3, indicating a positive correlation with SiO₂ contents. The K-rich calc-alkaline rocks were derived through fractional crystallization from a mafic parental magma with a slightly high ¹⁸O value, implying a major contribution of a sub-arc mantle at a continental margin. Trace element modeling indicates that the source could have been a fertile lherzolite enriched in LILE and depleted in HFSE. The innermost granodiorite was the differentiation product of a distinct parental magma, suggesting the involvement of a small amount of crustal component in the source and partial melting under a more hydrous condition.Editorial responsibility: J. Hoefs     

Analytical study on vulnerability functions for casualty estimation in the collapse of adobe buildings induced by earthquake

Collapse of adobe buildings during an earthquakes with various earthquake intensities is analyzed using the 3-dimensional distinct element method code developed by the first author. Firstly, we evaluate structural damage with damage index, interior-space damage with w score, and human casualties in the collapsing buildings with three casualty criteria. Secondly, we investigate relationships between the earthquake intensity, the structural damage, the interior-space damage, and the casualties. It is found that the casualties have stronger correlation with the interior-space damage than the structural damage, and three vulnerability functions, namely, structural, interior-space and casualty vulnerability functions, are proposed. Effects of reinforcing methods on these functions are also examined. Finally, a series of analytical procedures to develop vulnerability functions and to estimate casualties using the functions are described.