A field comparison of two methods for the determination of copper complexation: Bacterial bioassay and fixed-potential amperometry

Complexation of copper added to seawater was determined by bacterial bioassay and fixedpotential amperometry. Consistent results were obtained by these two fundamentally different methods. The results of this study support the validity of both techniques and the field applicability of fixed-potential amperometry.The intercomparison studies were performed on samples collected at the N.Y.C. sewage sludge dumpsite and in relatively unpolluted coastal waters. In this limited study, the calculated free cupric ion concentrations at ambient total copper concentrations were similar at both sites.     

Post-Miocene stratigraphy and depositional environments of valley-fill sequences at the mouth of Tampa Bay, Florida

Post-Miocene sea-level low stands allowed rivers and karst processes to incise the exposed carbonate platform along the Gulf Coast of Florida. Few Miocene to mid-Pleistocene deposits survived erosion along the present coast except within incised valleys. Since their formation, these valleys have been filled and incised multiple times in response to sea-level changes. The thick sedimentary sequences underlying the mouth of Tampa Bay have been recorded as a range of depositional environments and multiple sea-level incursions and excursions during pre-Holocene time and subsequent to the accumulation of the Miocene carbonate sequences. Sediment analysis of cores collected from a north–south transect across the mouth of Tampa Bay has enabled the identification of lithofacies, ranging from well-sorted, quartz sand to dense, fossiliferous, phosphatic grainstone. These facies were deposited in freshwater, estuarine, and shallow, open marine environments. As a result of channel development and migration within the paleovalley, and cut-and-fill associated with individual transgressions and regressions, correlation of the lithofacies does not extend across the entire transect. Fining-upward sequences truncated by tidal ravinement surfaces that extend throughout the paleovalley can, however, be identified. Age determinations based on 14-C analysis, amino-acid racemization, and strontium isotope analysis dating of numerous samples yield ages of Miocene, Pliocene, early Pleistocene, and late Pleistocene, as well as Holocene for sequences that accumulated and were preserved in this valley-fill complex. Numerous inconsistencies in the stratigraphic organization of the age determinations indicate that there are bad dates, considerable reworking of shells that were dated, or both. For this reason as well as the lack of detailed correlation among the three relatively complete cores, it is not possible to place these strata in a sequence stratigraphic framework.     

Estrogenic responses of larval sunshine bass (Morone saxatilis x M. Chrysops) exposed to New York City sewage effluent

To determine the estrogenicity of effluents from sewage treatment plants (STPs) to larval fish, 2-day-old sunshine bass were exposed to effluents from three STPs serving New York City (NYC), varying in size and treatment level. Estrogenic response was evaluated by measuring vitellogenin (VTG) and estrogen receptor (ER) expression in cytosolic fractions of whole body homogenates. Concentrations of the presumptive endocrine disruptors in the effluents were also measured. VTG and ER levels in sewage-exposed fish were 3-5 times that observed in controls. Combined concentrations of estradiol and estrone ranged from 5 to 13 ng/l and nonylphenol-ethoxylate metabolites (NPEOs: 4-nonylphenol, and 1-, 2-, and 3-nonylphenol-ethoxylates) ranged from 180 to 470 microg/l in chlorinated effluent. Results indicate that both ER and VTG can be used as biomarkers for endocrine disruption in larval fish, and that 4-day exposure to sewage effluent is sufficient to elicit significant expression of these markers in sunshine bass larvae. The extremely higher concentrations of NPEOs found in effluent relative to hormones (approximately 40,000-fold) indicates that surfactant metabolites may be contributing significantly to the estrogenic effects observed.     

Dwarf elliptical galaxies

Dwarf elliptical (dE) galaxies, with blue absolute magnitudes typically fainter than _MB =?16, are the most numerous type of galaxy in the nearby universe. Tremendous advances have been made over the past several years in delineating the properties of both Local Group satellite dE's and the large dE populations of nearby clusters. We review some of these advances, with particular attention to how well currently available data can constrain

1. models for the formation of dE's
2. the physical and evolutionary connections between different types of galaxies (nucleated and nonnucleated dE's, compact E's, irregulars, and blue compact dwarfs) that overlap in the same portion of the mass-spectrum of galaxies
3. the contribution of dE's to the galaxy luminosity functions in clusters and the field
4. the star-forming histories of dE's and their possible contribution to faint galaxy counts, and
5. the clustering properties of dE's.

In addressing these issues, we highlight the extent to which selection effects temper these constraints, and outline areas where new data would be particularly valuable.     

The electrical structure of the Slave craton

The Slave craton in northwestern Canada, a relatively small Archean craton (600×400 km), is ideal as a natural laboratory for investigating the formation and evolution of Mesoarchean and Neoarchean sub-continental lithospheric mantle (SCLM). Excellent outcrop and the discovery of economic diamondiferous kimberlite pipes in the centre of the craton during the early 1990s have led to an unparalleled amount of geoscientific information becoming available.

Over the last 5 years deep-probing electromagnetic surveys were conducted on the Slave, using the natural-source magnetotelluric (MT) technique, as part of a variety of programs to study the craton and determine its regional-scale electrical structure. Two of the four types of surveys involved novel MT data acquisition; one through frozen lakes along ice roads during winter, and the second using ocean-bottom MT instrumentation deployed from float planes.

The primary initial objective of the MT surveys was to determine the geometry of the topography of the lithosphere–asthenosphere boundary (LAB) across the Slave craton. However, the MT responses revealed, completely serendipitously, a remarkable anomaly in electrical conductivity in the SCLM of the central Slave craton. This Central Slave Mantle Conductor (CSMC) anomaly is modelled as a localized region of low resistivity (10–15 Ω m) beginning at depths of 80–120 km and striking NE–SW. Where precisely located, it is spatially coincident with the Eocene-aged kimberlite field in the central part of the craton (the so-called “Corridor of Hope”), and also with a geochemically defined ultra-depleted harzburgitic layer interpreted as oceanic or arc-related lithosphere emplaced during early tectonism. The CSMC lies wholly within the NE–SW striking central zone defined by Grütter et al. [Grütter, H.S., Apter, D.B., Kong, J., 1999. Crust–mantle coupling; evidence from mantle-derived xenocrystic garnets. Contributed paper at: The 7th International Kimberlite Conference Proceeding, J.B. Dawson Volume, 1, 307–313] on the basis of garnet geochemistry (G10 vs. G9) populations.

Deep-probing MT data from the lake bottom instruments infer that the conductor has a total depth-integrated conductivity (conductance) of the order of 2000 Siemens, which, given an internal resistivity of 10–15 Ω m, implies a thickness of 20–30 km. Below the CSMC the electrical resistivity of the lithosphere increases by a factor of 3–5 to values of around 50 Ω m. This change occurs at depths consistent with the graphite–diamond transition, which is taken as consistent with a carbon interpretation for the CSMC.

Preliminary three-dimensional MT modelling supports the NE–SW striking geometry for the conductor, and also suggests a NW dip. This geometry is taken as implying that the tectonic processes that emplaced this geophysical–geochemical body are likely related to the subduction of a craton of unknown provenance from the SE (present-day coordinates) during 2630–2620 Ma. It suggests that the lithospheric stacking model of Helmstaedt and Schulze [Helmstaedt, H.H., Schulze, D.J., 1989. Southern African kimberlites and their mantle sample: implications for Archean tectonics and lithosphere evolution. In Ross, J. (Ed.), Kimberlites and Related Rocks, Vol. 1: Their Composition, Occurrence, Origin, and Emplacement. Geological Society of Australia Special Publication, vol. 14, 358–368] is likely correct for the formation of the Slave's current SCLM.     

Estimating the elastic parameters of anisotropic media using a joint inversion of P-wave and SV-wave traveltime error

A method is presented to estimate the elastic parameters and thickness of media that are locally laterally homogeneous using P‐wave and vertically polarized shear‐wave (SV‐wave) data. This method is a ‘layer‐stripping’ technique, and it uses many aspects of common focal point (CFP) technology. For each layer, a focusing operator is computed using a model of the elastic parameters with which a CFP gather can be constructed using the seismic data. Assuming local homogeneity, the resulting differential time shifts (DTSs) represent error in the model due to anisotropy and error in thickness. In the (τ?p) domain, DTSs are traveltimes Δτ that connect error in layer thickness z, vertical slowness q, and ray parameter p. Series expansion is used to linearize Δτ with respect to error in the elastic parameters and thickness, and least‐squares inversion is used to update the model. For stability, joint inversion of P and SV data is employed and, as pure SV data are relatively rare, the use of mode‐converted (PSV) data to represent SV in the joint inversion is proposed. Analytic and synthetic examples are used to demonstrate the utility and practicality of this inversion.     

Pahoehoe and aa in Hawaii: volumetric flow rate controls the lava structure

The historical records of Kilauea and Mauna Loa volcanoes reveal that the rough-surfaced variety of basalt lava called aa forms when lava flows at a high volumetric rate (>5–10 m³/s), and the smooth-surfaced variety called pahoehoe forms at a low volumetric rate (<5–10 m³/s). This relationship is well illustrated by the 1983–1990 and 1969–1974 eruptions of Kilauea and the recent eruptions of Mauna Loa. It is also illustrated by the eruptions that produced the remarkable paired flows of Mauna Loa, in which aa formed during an initial short period of high discharge rate (associated with high fountaining) and was followed by the eruption of pahoehoe over a sustained period at a low discharge rate (with little or no fountaining). The finest examples of paired lava flows are those of 1859 and 1880–1881. We attribute aa formation to rapid and concentrated flow in open channels. There, rapid heat loss causes an increase in viscosity to a threshold value (that varies depending on the actual flow velocity) at which, when surface crust is torn by differential flow, the underlying lava is unable to move sufficiently fast to heal the tear. We attribute pahoehoe formation to the flowage of lava at a low volumetric rate, commonly in tubes that minimize heat loss. Flow units of pahoehoe are small (usually <1 m thick), move slowly, develop a chilled skin, and become virtually static before the viscosity has risen, to the threshold value. We infer that the high-discharge-rate eruptions that generate aa flows result from the rapid emptying of major or subsidiary magma chambers. Rapid near-surface vesiculation of gas-rich magma leads to eruptions with high discharge rates, high lava fountains, and fast-moving channelized flows. We also infer that long periods of sustained flow at a low discharge rate, which favor pahoehoe, result from the development of a free and unimpeded pathway from the deep plumbing system of the volcano and the separation of gases from the magma before eruption. Achievement of this condition requires one or more episodes of rapid magma excursion through the rift zone to establish a stable magma pathway.     

Slope-induced changes in channel character along a gravel-bed stream: The Allt Dubhaig,Scotland

Changes in channel character along a small river in the Scottish Highlands are described using measurements in seven reaches over a 3 km length with no significant tributaries but a decline in slope from 0.02 to 0.00015 because of local baselevel control. This decline in slope is associated with rapid downstream fining of the gravel bed followed by an abrupt transition to a sand bed. The channel pattern alters progressively rather than abruptly, in the sequence (1) near-braided, (2) meandering with active point-bar chutes, (3) meandering with active outer-bank talweg, (4) stable equiwidth sinuous. The changes in channel pattern and hydraulic geometry are predicted better by rational approaches based on critical shear stress or other physical concepts than by purely empirical discriminant or trend equations. Measurements in five reaches confirm a downstream decrease in shear stress and the amount and calibre of bedload. It is argued that the downstream changes in channel character in this stream are induced by profile concavity inherited from deglacial conditions, are typical of many streams in mountainous areas and can be understood in terms of slope-induced changes in hydraulic properties.     

Hydrogeology of the Winnipeg Formation in Manitoba, Canada

The Winnipeg Formation is the basal sedimentary unit throughout much of southern and central Manitoba, Canada, where it forms a regional aquifer over most of its extent. This aquifer is an important source of water in southeastern Manitoba and in Manitoba’s Interlake area, but in most other areas, groundwater within the aquifer is saline. Chemical and isotopic evidence indicate the presence of groundwaters of three different origins: (1) basin brines; (2) modern meteoric recharge; and (3) subglacial recharge that occurred during the late Pleistocene. Hydraulic head and sedimentary facies distributions indicate that the flow system in parts of the area is not in a state of equilibrium and saline waters will encroach on areas currently occupied by freshwater in some areas, while in other areas, freshwater will replace saline water. These features must be considered in groundwater resource management, as groundwater withdrawals will likely hasten these processes.

---

Resumen La Formación Winnipeg es la unidad sedimentaria basal en la mayor parte de Manitoba central, Canadá, donde forma un acuífero regional en la mayor parte de su extensión. Este acuífero es una fuente importante de agua en el Sureste de Manitoba y el área de entrelagos de Manitoba, pero en la mayoría de las otras zonas del acuífero, el agua es salina. Las evidencias químicas e isotópicas indican que existen aguas subterráneas de tres orígenes diferentes: (1) salmueras de cuenca; (2) recarga meteórica actual; y (3) recarga subglacial ocurrida durante el Pleistoceno Superior. Los niveles piezométricos y la distribución de las facies sedimentarias indican que el sistema de flujo no se encuentra en estado de equilibrio en parte del área y las aguas salinas irán invadiendo áreas actualmente ocupadas con aguas dulces, mientras que en otras zonas el agua dulce está reemplazando al agua salina. Estos hechos deben ser considerados en la gestión de las aguas subterráneas como recurso, ya que las extracciones de agua acelerarán probablemente estos procesos.

---

Résumé La Formation de Winnipeg est l’unité sédimentaire de base sur la plus grande partie du Sud et du centre du Manitoba au Canada, où elle forme un aquifère régional sur pratiquement toute son extension. Cet aquifère représente une ressource en eau importante dans le Sud-Est du Manitoba et dans les zones d’entre les lacs, mais salée dans la plus part des autres zones. Les indications isotopiques et chimiques permettent de distinguer trois différentes origines des eaux souterraines: (1) les saumures de bassin; (2) la recharge météoritique moderne; (3) la recharge sub-glaciaire qui est apparue durant le Pléistocène récent. Les charges hydrauliques et la distribution des faciès sédimentaires indiquent que le système d’écoulement dans certaines zones n’est pas dans un état d’équilibre et que les eaux salées empièteront sur des zones d’eau douce, tandis que dans d’autres zones l’eau douce remplacera les eaux salées. Ces aspects doivent être considérés dans la gestion des ressources en eau souterraine, car le prélèvement des eaux souterraines pourrait accentuer ces processus.

     

Deriving Acceleration from DGPS: Toward Higher Resolution Applications of Airborne Gravimetry

Although airborne gravimetry is now considered a fully operational technique, errors due to motion compensation using differential GPS (DGPS) continue to influence both its accuracy and the range of applications in which it can be used. In typical medium-resolution applications such as airborne geoid mapping, errors due to DGPS contribute considerably to the error budget of an airborne gravity system. At the same time, efforts to increase the resolution of such systems for demanding applications such as resource exploration remain impedded by errors in DGPS. This article has three objectives. The first one is to compare eight industrially relevant DGPS software packages for the determination of aircraft acceleration. The second objective is to analyze and quantify the effect that each relevant portion of the DGPS error budget has on the determination of acceleration. Using data sets that represent a wide range of operational conditions, this is done in the frequency domain over a range of frequencies corresponding to spatial resolution as high as 450 m. The third objective is to use that information to recommend and demonstrate approaches that optimize the estimation of aircraft acceleration for determining the geoid and for resource exploration. It is shown, for example, that the time of day in which the survey is carried out and the dynamic characteristics of the aircraft being used are two of the most crucial parameters for very high-resolution gravity field estimation. It is demonstrated that when following the above-mentioned recommendations, agreements with ground daa of better than 1.5 and 2.5 mGal can be achieved for spatial resolutions (half-wavelengths) of 2.0 and 1.4 km, respectively. ? 2002 Wiley Periodicals, Inc.