浙江花岗岩类地球化学与地壳演化——Ⅱ.元古宙花岗岩类

浙江元古宙花岗岩类包括神功期（1．8－1．9Ga）和晋宁晚期（0．6—0．9Ga）。研究了浙江元古宙花岗岩类的主元素、微量元素、稀土元素和Rb、Sr同位素组成特征及岩石成因，探讨了浙江地壳的演化。浙江地壳形成于太古亩和元古宙，地壳增生的时期为2．6－2．7、0．8-1．1和0.1－0.12Ga。随时间演化浙江地壳组成有变化，但分异演化不明显。沿江-绍断裂分布的晋宁晚期慢源和壳幔混合中酸性岩是普宁期俯冲碰撞的证据。加里乐和印支期是两次规模不大的构造运动。     

Study on Strength Influence Mechanism of Fiber-Reinforced Expansive Soil Using Jute

This study was undertaken to research the effects of jute fiber content, fiber length, water content and dry density of reinforced and unreinforced soil on the strength influence mechanism by implementing a series of laboratory tests and analysis. The most efficient fiber reinforcement effects was achieved by means of adding jute fiber with content of 0.6 % and length of 6 mm into expansive soil specimen prepared at maximum dry density and optimum moisture content. The cohesion of reinforced specimens increased first with increasing fiber content and fiber length and then decreased with further increase in fiber content and fiber length. The internal friction angle of reinforced specimens were not affected significantly by fiber content and fiber length. Higher water content reduces the fiber reinforcement effects by means of acting as lubricant in the interface of fiber and soil particles. Fiber reinforcement effects is more prominent for specimens prepared at higher dry density by increasing the effective contact area of fiber/soil. The application prospect of soil reinforcement using natural fiber is impeded by the hydrophilic nature and biodegradability of natural fiber, thus, studies on using chemical additive to do surface treatment for natural fiber are needed to improve the interfacial interaction of fiber/soil so as to widen the application of natural fiber.     

Dynamic Response and Mechanical Behaviours of Geogrid for High Earth-rockfill Dams

Geotechnical and Geological Engineering - Due to the complexity of the interaction between the geogrid and the soil interface in high earth-rock dams, the method of replacing the grid with steel...     

X-ray flurorescene (XRF) determination of trace rare-earth elements in geological samples using ion-exchange-resin membrane technique

Rare-earth elements in samples of geological interest were separated from other elements and concentrated onto ion-exchange membrane through ion-exchange procedures. The membrane was then used to determine the REE by X-ray fluorescence spectrography. In comparison with the traditional “thick-specimen” approach, the requirement of sample (REE oxides) in this method was reduced from 10 to 1 mg. Variable-internal-standard-quantification method was adopted to determine the relative concentrations of REE collected on the membrane. The area density of the sample was controlled at about 0.0003 g/cm², so that the matrix effect could be eliminated to a satisfactory extent. Interference calibration between the spectro-lines and the background determination was also improved, with the detection limit reaching 2.5×10^?6g.     

南极菲尔德斯半岛湖泊沉积物的稀土地球化学

本文研究了燕鸥湖、西湖和基太湖湖泊沉积物的稀土地球化学。这些湖泊沉积物的稀土分布模式与菲尔德斯半岛第三纪火山岩非常相似，它们的物质来源是菲尔德斯半岛岛弧火山岩。湖泊沉积相与冰碛层稀土模式的差异，反映了它们经历的化学风化程度不同、粘土含量不同。Ｃｅ异常意味着每个湖泊沉积旋回结束的阶段气候是比较干燥的。湖泊沉积物的稀土含量和分布模式变化小，也意味着在中晚更新世时气候是比较干燥的。     

用地震折射法探测沥青路面的季节融化深度及其变化

试验结果表明,用经过数字化改造后的地震仪测出的路心融化深度,与钻孔测温确定的融化深度相比,其解释误差小于7％。路基和涵洞横剖面的探测结果能反映出融化层变化的主要趋势。不同路堤高度的路基形成的融化横剖面均呈下凹形,而涵洞下形成的融化横剖面则是涵洞中心的融化深度小于两端洞口处的融化深度。因此,地震折射法将为多年冻土地区路基的修筑和稳定性研究提供一种简捷、可靠的探测手段。     

High-Frequency Rayleigh-Wave Method

High-frequency (≥2 Hz) Rayleigh-wave data acquired with a multichannei recording sys-tem have been utilized to determine shear (S)-wave velocities in near-surface geophysics since the early 1980s. This overview article discusses the main research results of high-frequency surface-wave tech-niques achieved by research groups at the Kansas Geological Survey and China University of Geosciences in the last 15 years. The multichannel analysis of surface wave (MASW) method is a nou-iuvasive acoustic approach to estimate near-surface S-wave velocity. The differences between MASW results and direct borehole measurements are approximately 15% or less and random. Studies show that simultaneous inversion with higher modes and the fundamental mode can increase model resolution and an investigation depth. The other important seismic property, quality factor (Q), can also be estimated with the MASW method by inverting attenuation coefficients of Rayleigh waves. An inverted model (S-wave velocity or Q) obtained using a damped least-squares method can be assessed by an optimal damping vector in a vicinity of the inverted model determined by an objective function, which is the trace of a weighted sum of model-resolution and model-covariance matrices. Current developments include modeling high-frequency Rayleigh-waves in near-surface media, which builds a foundation for shallow seismic or Rayleigh-wave inversion in the time-offset domain; imaging dispersive energy with high resolution in the frequency-velocity domain and possibly with data in an arbitrary acquisition geometry, which opens a door for 3D surface-wave techniques; and successfully separating surface-wave modes, which provides a valuable tool to perform S-wave velocity profiling with high-horizontal resolution.     

湖南省高速公路用地政策的应用实践和探讨

近十年来,湖南省高速公路建设呈现出几何级数增长,在湖南省高速公路建设发展强劲的同时,其用地政策执行中还存在诸多问题,如粗放用地,未批先用、以批代供、临时用地多,复垦难度大,经营性用地未实行有偿使用,高速公路用地登记发证滞后等。本文结合湖南省高速公路用地特点,深入剖析其用地政策中存在的问题,并针对加强湖南省高速公路用地管理,完善高速公路用地政策提出意见建议。     

Multi-station superposition for magnetotelluric signal

Extending the observation time to increase the length of time series is the most effective but consuming way to improve the signal-to-noise ratio of magnetotelluric (MT) signal. Multi-station superposition technique at present proposed for magnetotelluric survey aims to attenuate random noises by multi-station synchronously observation at one site. The idea stems from seismic array stacking and is mathematically verified corresponding to a linear random noise model. The multi-station superposition can be done in time and frequency domains. A practical testing measurement was performed by setting three stations on vertexes of an equilateral triangle and a single station on centre of the triangle in desert area of the Tarim basin, western China. The results of the testing data demonstrate the effectiveness of the proposed scheme. The method has great potentials for long-period MT survey in dramatically reducing the observation time and suppressing the static shift caused by near-surface inhomogeneities.     

Dipping-interface Mapping Using Mode-separated Rayleigh Waves

Multichannel analysis of surface waves (MASW) method is a non-invasive geophysical technique that uses the dispersive characteristic of Rayleigh waves to estimate a vertical shear (S)-wave velocity profile. A pseudo-2D S-wave velocity section is constructed by aligning 1D S-wave velocity profiles at the midpoint of each receiver spread that are contoured using a spatial interpolation scheme. The horizontal resolution of the section is therefore most influenced by the receiver spread length and the source interval. Based on the assumption that a dipping-layer model can be regarded as stepped flat layers, high-resolution linear Radon transform (LRT) has been proposed to image Rayleigh-wave dispersive energy and separate modes of Rayleigh waves from a multichannel record. With the mode-separation technique, therefore, a dispersion curve that possesses satisfactory accuracy can be calculated using a pair of consecutive traces within a mode-separated shot gather. In this study, using synthetic models containing a dipping layer with a slope of 5, 10, 15, 20, or 30 degrees and a real-world example, we assess the ability of using high-resolution LRT to image and separate fundamental-mode Rayleigh waves from raw surface-wave data and accuracy of dispersion curves generated by a pair of consecutive traces within a mode-separated shot gather. Results of synthetic and real-world examples demonstrate that a dipping interface with a slope smaller than 15 degrees can be successfully mapped by separated fundamental waves using high-resolution LRT.