On the possibility of earth-type habitable planets around 47 UMa

We investigate whether Earth-type habitable planets can in principle exist in the planetary system of 47 UMa. The system of 47 UMa consists of two Jupiter-size planets beyond the outer edge of the stellar habitable zone, and thus resembles our own Solar System most closely compared to all exosolar planetary systems discovered so far. Our study of habitability deliberately follows an Earth-based view according to the concept of Franck and colleagues, which assumes the long-term possibility of photosynthetic biomass production under geodynamic conditions. Consequently, a broad variety of climatological, biogeochemical, and geodynamical processes involved in the generation of photosynthesis-driven life conditions is taken into account. The stellar luminosity and the age of the star/planet system are of fundamental importance for planetary habitability. Our study considers different types of planetary continental growth models and takes into account a careful assessment of the stellar parameters. In the event of successful formation and orbital stability, two subjects of intense research, we find that Earth-type habitable planets around 47 UMa are in principle possible! The likelihood of those planets is increased if assumed that 47 UMa is relatively young (?6 Gyr) and has a relatively small stellar luminosity as permitted by the observational range of those parameters.     

The Market Gate of Miletus: damages, material characteristics and the development of a compatible mortar for restoration

The indoor exhibit of the Market Gate of Miletus is unique for an archaeological monument. The reconstruction of the gate was done in such a way that most marble fragments were removed leaving cored marble columns 3–4 cm in thickness. These cored columns were mounted on a steel construction and filled with different mortars or filled with specially shaped blocks of brick combined with mortar. All the missing marble elements were replaced by copies made of a Portland cement based concrete, which is compositionally similar to the original building materials. During the Second World War the monument was heavily damaged by aerial bombardment. For 2 years the Market Gate of Miletus was exposed to weathering, because a brick wall protecting the gate was also destroyed. The deterioration phenomena observed are microcracks, macroscopic fractures, flaking, sugaring, greying, salt efflorescence, calcitic-sinter layers and iron oxide formation etc. The rapid deterioration seems to be due to indoor atmospheric effects, and also by a combination of incompatible materials (e.g. marble, steel, mortar, concrete, bricks etc.). Compatible building materials like mortars or stone replacing materials have to be developed for the planned restoration. The requirements for restoration mortars are chemical-mineralogical and physical-mechanical compatibilities with the existing building materials. In detail this means that the mortar should ensure good bonding properties, adapted strength development and not stain the marble when in direct contact. The favoured mortar was developed with a hydraulic binder based on iron-free white cement and pozzolana based on activated clay. A special limestone and quartz sand mixture was used as an aggregate. The cement was adjusted using chemical additives. Specially designed tests were applied extensively to prove whether the developed mortar is suitable for the restoration of this precious monument.     

Neue ZnS-Polytypen (9R, 12R und 21R) in mesozoischen Sedimenten NW-Deutschlands

Summary Argillaceous sediments of jurassic and lower cretaceous age in NW-Germany contain in several localities authigenous ZnS-polytypes. The crystals with a maximum height of 2 mm exhibit hexagonal-pyramidal and trigonal-pyramidal habit.With X-ray rotation and precession technique the following polytypes could be identified: Sphalerite (3 R = 3 C) 211, 411, 6H 9R, 12R, 15R and 21R.The 9 R-, 12 R- and 21 R-polytypes have not until now been described elsewhere.The structures of the new polytypes were determined as 9R=(21), 12R=(13) and 21R=(3112).Oriented intergrowths of R- and H-polytypes were frequently observed. From the intergrowth-phenomena arguments for the environmental conditions of formation can be deducted.[/p]     

Roll Vortices and Boundary-Layer Development during a Cold Air Outbreak

The development of the boundary layer during a cold air outbreak in the FramStrait is documented by aircraft measurements. The convection was organisedinto roll vortices with aspect ratios increasing from 2.9 near the ice edgeto more than 6 at 100 km further downstream. This increase coincides with anincrease of the latent heat release in the cloud layer. The stability parameter-zi/L varies from about zero at the ice edge to 30 at a distance of 200 kmdownstream over open water where the satellite picture still shows cloudstreets. The increase is mainly due to the deepening of the boundary layer.The turbulent vertical sensible and latent heat fluxes near the surface amountto 400 W m^-2 within a 300 km off-ice zone. 25% of the upward heat fluxin the subcloud layer is carried out by organised roll motions. Experimentswith a 2-dimensional non-hydrostatic model show a similar roll aspect ratio inthe first 50 km, but further downstream where condensational heating is moreimportant the modelled roll wavelengths are distinctly smaller than the observedones.     

Why GPS makes distances bigger than they are

Global navigation satellite systems such as the Global Positioning System (GPS) is one of the most important sensors for movement analysis. GPS is widely used to record the trajectories of vehicles, animals and human beings. However, all GPS movement data are affected by both measurement and interpolation errors. In this article we show that measurement error causes a systematic bias in distances recorded with a GPS; the distance between two points recorded with a GPS is – on average – bigger than the true distance between these points. This systematic ‘overestimation of distance’ becomes relevant if the influence of interpolation error can be neglected, which in practice is the case for movement sampled at high frequencies. We provide a mathematical explanation of this phenomenon and illustrate that it functionally depends on the autocorrelation of GPS measurement error (C). We argue that C can be interpreted as a quality measure for movement data recorded with a GPS. If there is a strong autocorrelation between any two consecutive position estimates, they have very similar error. This error cancels out when average speed, distance or direction is calculated along the trajectory. Based on our theoretical findings we introduce a novel approach to determine C in real-world GPS movement data sampled at high frequencies. We apply our approach to pedestrian trajectories and car trajectories. We found that the measurement error in the data was strongly spatially and temporally autocorrelated and give a quality estimate of the data. Most importantly, our findings are not limited to GPS alone. The systematic bias and its implications are bound to occur in any movement data collected with absolute positioning if interpolation error can be neglected.     

Ascending droplets in the earth's core

This paper is concerned with some new problems of the dynamics and energetics of the Earth's core. The model of the so-called gravitationally-powered dynamo is investigated under the assumption of liquid immiscibility in the FeS system as a possible core material. In this way the growing inner core causes nucleation of small FeS-droplets that ascend under the release of gravitational potential energy. This energy is enough to drive a dynamo with a toroidal magnetic field of mean size.     

Mineralogical,geochemical and microfabric evidences of gypsum crusts: a case study from Budapest

High levels of SO₂ and particulate pollution enable the rapid development of gypsum-rich weathering crusts in Budapest. Two types of white crusts, thin and thick ones, and two forms of black crusts, laminar and framboidal ones, were studied in limestone buildings of the parliament and Citadella. The percentage of crust cover and damage categories were documented on selected walls. Petrographic, XRD, XRF and sulphur isotope analyses were performed under laboratory conditions to understand the mechanism of crust formation. White crusts found both on exposed and sheltered walls display a calcite-rich layer with gypsum, while black crusts are enriched with gypsum. The sulphur isotopic composition of white and black crusts overlaps, but the crusts are slightly enriched in heavy isotopes compared to rainwater. S content, Si/Al ratios and particulates in black crusts suggest that air pollution (SO₂, dust) contributes to black crust formation. The accumulation of sulphur and Zn enrichment of white crusts were also documented indicating that under high pollution levels, even these compound can accumulate on exposed facades.     

Der Original-Beerbachit im Odenwald,ein Amphibolit-Hornfels in Pyroxen-Hornfelsfazies

With this petrographic re-investigation of the beerbachite (Chelius, 1892) from Odenwald/Germany geochemical and phase-petrological data are given for the first time.By petrofabric relics (Fig. 7) and geochemical characteristics (Figs. 8–11) is shown that the beerbachite-xenoliths are due to blocks broken down from the surrounding amphibolite series. They are present high grade hornfelses.Beerbachite, porphyroblastic by plagioclase (here porphyroblastic beerbachite, Bbp) (Chelius' Gabbroporphyrit) (Fig. 6) frequently forms marginal zones of beerbachite blocks and is explained as beerbachite-metablastite.Phase relation (Fig. 13) and mineral reactions with increasing metamorphic grade from amphibolite to amphibolite-hornfels (containing hornblende) finally to beerbachite are demonstrated and discussed.The first step may be the mineral reaction: plag_I(An 35–40)+hbl_I+sphene= plag_II(An 50–60)+hbl_II+cpx+opx+magnetite/ilmenite+H₂O. The pyroxene-hornfels facies respectively the orthopyroxene subfacies of the K-feldspar-cordierite-hornfels facies (Winkler, 1967) is only reached with the typical assemblage: plag(An 55–70)-cpx-opx-mt/ilm±(quartz) of beerbachite.On condition that the load correspondends to 3–4 km the maximum temperatures may not have exceeded 720–750° C. This valuation would result from experimental data of Choudhuri and Winkler (1967) of the model reaction: hbl=en+di+an+H₂O, if . The natural conditions will differ from this experimental model because of resp. P _load (p. 81)The very probably required temperature for the mineral assemblage of beerbachite would still be within sub-solidus temperatures of the corresponding model system, according to Fig. 13d. Therefore, the coarse grained plagioclases of Bbp (p. 69) could not be formed from cotectic pockets, too.Finally, convergences and divergences to the beerbachite concept are discussed out of the recent literature.

---

---

Herrn Dr. E. Knauer vom hiesigen Institut danken wir sehr für die Bestimmung des Chemismus zweier Pyroxen-Paare aus Beerbachit bzw. Hornfels mit der Mikrosonde (CAMEGA MS 46), Leihgabe der Deutschen Forschungsgemeinschaft. Den Herren Prof. E. Nickel und Dr. M. Maggetti vom Mineralogischen Institut der Universität Fribourg (Schweiz) und Dr. H. D. Trochim, Mineralogisches Institut der Universität Bochum, verdanken wir Vergleichsproben oder Einsichtnahme in vorhandene Dünnschliffe.