Antenna design and implementation for the future space Ultra-Long wavelength radio telescope

In radio astronomy, the Ultra-Long Wavelengths (ULW) regime of longer than 10 m (frequencies below 30 MHz), remains the last virtually unexplored window of the celestial electromagnetic spectrum. The strength of the science case for extending radio astronomy into the ULW window is growing. However, the opaqueness of the Earth’s ionosphere makes ULW observations by ground-based facilities practically impossible. Furthermore, the ULW spectrum is full of anthropogenic radio frequency interference (RFI). The only radical solution for both problems is in placing an ULW astronomy facility in space. We present a concept of a key element of a space-borne ULW array facility, an antenna that addresses radio astronomical specifications. A tripole–type antenna and amplifier are analysed as a solution for ULW implementation. A receiver system with a low power dissipation is discussed as well. The active antenna is optimized to operate at the noise level defined by the celestial emission in the frequency band 1 ? 30 MHz. Field experiments with a prototype tripole antenna enabled estimates of the system noise temperature. They indicated that the proposed concept meets the requirements of a space-borne ULW array facility.     

Spectra of quasiperiodic oscillations of galactic X-ray sources–dynamical regimes from a simple model

We suggest that the dynamical regime(s) underlying quasi-periodic oscillations observed in the spectra of bright galactic-bulge X-ray sources are nonlinear with a mixed phase space. The important feature of such regimes is that they are generic among nonlinear Hamiltonian and nearly Hamiltonian systems of more than two degrees of freedom. We give a simple example of such chaotic (deterministic) systems whose spectra share a number of features with those observed for quasiperiodic oscillations of such sources.     

Three-dimensional discontinuous deformation analysis (3-D DDA) using a new contact resolution algorithm

This paper presents a new contact calculating algorithm for contacts between two polyhedra with planar boundaries in the three-dimensional discontinuous deformation analysis (3-D DDA). In this algorithm, all six type contacts in 3-D (vertex-to-face, vertex-to-edge, vertex-to-vertex, face-to-face, edge-to-edge, and edge-to-face) are simply transformed into the form of point-to-face contacts. The presented algorithm is a simple and efficient method and it can be easily coded into a computer program. In this paper, formulations of normal contact, shear contact and frictional force submatrices based on the new method are derived and the algorithm has been programmed in VC⁺⁺. Examples are provided to demonstrate the new contact rule between two blocks.     

The potassium abundance in the solar photosphere

High precision center-limb spectrograms of the K i resonance doublet line at λ 7699 Å were used to study the line formation and to determine the abundance of potassium in the solar atmosphere. The LTE assumption is not valid for these lines. Synthetic profiles computed in NLTE reproduce very well the observed center-limb line behaviour and yield log? _K = 5.14±0.10 for the solar abundance of potassium (on the scale of log? _H = 12 for Hydrogen).     

Economic analysis for the production of four grape cultivars using microcatchment water harvesting systems in Iran

An economic analysis was conducted for temporal yield variations of four local grape cultivars grown in rain-fed microcatchments in the Bajgah area of Fars province, in Islamic Republic of Iran. For this study, four local cultivars of grapes were considered. The cultivars examined were Black Rishbaba, Rotabi, Asgari and Black grapes. The soil type was a gravely loam with an average slope of 5–6%, in microcatchment systems, and in plots without microcatchments. Analysis of yield data with a multiple regression model indicated that a 9 m² (3×3 m) microcatchment area for each individual plant (vine) was the most appropriate area for vineyards in this region. The results also demonstrated that by using this area for each grapevine, yields (kg/ha) were 40% greater than yields obtained for vines in the standard vineyard (without microcatchments) in this area. Economic analysis was performed and the cost and income were compared for a depreciation period (life-span period) of 50 years and interest rate of 14%. The analysis showed that a microcatchment area of 9 m² is economically feasible. The Black Rishbaba rain-fed vines were the most suitable cultivar for this region. The benefit probabilities of rain-fed Black Rishbaba, Rotabi, Asgari and Black grapes with a microcatchment area of 9 m² and without such an area were 63.3% (i.e. two of 3 years), 52.4% (i.e. one of 2 years), 32.9% (i.e. one of 3 years), 13.3% (i.e. one of 8 years), and 59.5% (i.e. two of 3 years), 39.4% (i.e. two of 5 years), 31.8% (i.e. one of 3 years), and 10.7% (i.e. one of 9 years), respectively. Therefore, the Black Rishbaba and Rotabi cultivars are economically more stable in microcatchment system, while only the Black Rishbaba cultivar would be such in the standard vineyard system.     

Geochemical Prospectivity Mapping Through a Feature Extraction–Selection Classification Scheme

Natural Resources Research - Machine learning (ML) schemes can enhance success in geochemical prospectivity mapping. This study has examined the effectiveness of several feature extraction or...     

Steady critical discharge rates from vertical and horizontal wells in fresh–saline aquifers with sharp interfaces

In this study, the critical (or maximum) discharge rates before saline water enters a well were determined for vertical and horizontal wells in a freshwater aquifer which is separated from a static saline aquifer by a sharp interface. Flow around the well was solved by integration of a point sink solution along the well axis, and both the critical discharge rate and critical interface rise were determined through a comparison of the heads and vertical gradients at the saline–fresh water interface. The rates were determined for vertical and horizontal wells with various lengths and depths for different aquifer salinities. Results were generalized by drawing dimensionless type curves. The results showed that the dimensionless total critical discharge rates are higher for the longer horizontal wells and longer vertical wells with a certain bottom depth, and they almost linearly decrease with well depth at rates of 0.7–0.9. For the dimensionless well length of 0.2, the dimensionless total discharge rate of a horizontal well is about 0.1 more than that of a vertical well with the same length and well-top depth. Also, the critical discharge rates per unit length of well are inversely proportional to well length and remarkably higher for shallower wells. Additionally, the critical pumping rate is proportional to the salinity difference of the aquifers. These results were confirmed by comparison to existing solutions for vertical wells with dimensionless lengths of 0.2, 0.5 and 0.6, and for critical interface rises in the range of 0.75–0.9.