The last deglaciation in the Picos de Europa National Park (Cantabrian Mountains,northern Spain)

A sedimentological and geochemical study of the Lago Enol sequence (Cantabrian Mountains, northern Spain), together with detailed geomorphological mapping, provides a first record of glacier evolution and climate change over the last 40 ka in the Picos de Europa National Park. The Enol glacier retreated from its maximum extent prior to 40 ka BP as demonstrated by the onset of proglacial lacustrine sedimentation in two glaciated depressions: the Comella hollow to the north (before 40 ka BP) and the Lago Enol (before 38 ka BP). These results support previous evidence that the maximum extent of southern European glaciers occurred earlier than in northern Europe. Alternation of homogeneous and laminated proglacial sediments during the glacier retreat illustrate a dynamic glacial evolution during the Marine Isotope Stage (MIS) 3 (40–26 ka BP). A slight warming is detected at 26 ka ago with the change from proglacial sediments (in a lake located in contact to the glacier) to glaciolacustrine sedimentation (in a non‐contact or distal lake). Finally, the onset of organic‐rich sediments took place at 18 ka ago. This last transition occurred in two phases, similarly to the North Atlantic Last Termination, suggesting a link between North Atlantic Deep Water formation oscillations and palaeohydrological variability in the Cantabrian Mountains. Copyright © 2009 John Wiley & Sons, Ltd.     

Internal structure and kinematics of Variscan thrust sheets in the valley of the Trubia River (Cantabrian Zone, NW Spain): regional tectonic implications

The Variscan Belt in western Europe shows an arcuate geometry that is usually named Ibero-Armorican Arc. The nucleus of this arc, known as the Asturian Arc, comprises the Cantabrian Zone which is a foreland fold and thrust belt. The Trubia River area is located in the inflexion zone of the Asturian Arc, which is a strategic structural position for unraveling the geometry and kinematics of the Variscan thrust sheets and related folds. Geological mapping, construction of stratigraphic and structural cross sections, analysis of kinematic indicators, and estimate of shortening for each cross section have been carried out. This area consists of two major antiform-synform pairs related to two imbricate thrust systems. These folds are asymmetric, tight, and their axial traces follow the trend of the Asturian Arc. They have been interpreted as fault-propagation folds. The emplacement directions measured in the Trubia River area change from north to south and converge towards the core of the Asturian Arc. The minimum shortening estimated ranges between 16.4 and 17.6 km, which corresponds to 56.9 and 59.4%. The complex cross-cutting relationships between folds and thrusts suggest that, in general, the different structural units followed a forward-breaking sequence of emplacement, with some breaching and a few out-of-sequence thrusts. The analysis of the transport vectors together with the disposition of the fold axes and post-thrusting faults that deform the thrust stack are evidence of a late deformation event that is partially or totally responsible for the arcuate form of the Asturian Arc. The timing of the Asturian Arc, amount of shortening, and sequence of emplacement of the structures are in accordance with previous regional studies of the Cantabrian Zone.     

Results from MAGIC’s first observation cycle on galactic sources

During its Cycle I (2005/2006), the MAGIC telescope targeted about 250 hours several galactic γ-ray sources detected previously by other experiments or expected to emit in the same energy domain. This paper reviews some results of such MAGIC observations. We cover, among others, supernova remnants, the Galactic Center and microquasars. We will concentrate on the recent discovery of very high energy γ-rays from the microquasar LS I +61 303.     

Recent evolution of Lake Arreo,northern Spain: influences of land use change and climate

We present a high-resolution, multiproxy reconstruction of the depositional history of Lake Arreo, northern Spain, for the last 60 years. We conducted sedimentological, geochemical and diatom analyses in short cores and made a detailed comparison with regional instrumental climate data (1952–2007), limnological monitoring of the lake (1992–2008) and recent land use changes that affect the lake catchment. Chronology is based on “floating” discontinuous varve counts and ¹³⁷Cs and ¹⁴C dates. Four periods were identified in the Lake Arreo recent history: (1) prior to 1963, varved facies intercalated with fine turbidite deposits, and diatom assemblages dominated by Cyclotella taxa indicate predominantly meromictic conditions, (2) from 1964 to 1978, permanent anoxia persisted in bottom waters, as shown by similar facies and diatom assemblages as before, though detrital layers were coarser, (3) from 1979 to 1994, sediment delivery to the lake increased and laminated, clastic facies were deposited, and (4) from 1995 to 2008, dominance of massive facies and an increase in Fragilaria tenera and Achnanthes minutissima reflect relatively lower lake levels, less frequent bottom anoxia with more frequent water column mixing, similar to modern conditions. The period 1952–1979 was a time of meromixis and varved facies deposition, and was characterized by higher rainfall and less intense agricultural pressure in the watershed. There were two short humid periods (1992–1993 and 1996–1998) when monitoring data show more anoxic weeks per year and relatively higher lake levels. Increased cultivation of small landholdings in 1963, and particularly after 1979, caused a large increase in sediment delivery to the lake. The inferred lake evolution is in agreement with monitoring data that suggest a transition from dominantly meromictic conditions prior to 1993–1994 to a predominantly monomictic pattern of circulation since then, particularly after 2000. The synergistic effects of intensive water extraction for irrigation and lower rainfall since 1979, and particularly since 1994, brought the long period of meromictic conditions in Lake Arreo to an end. Water balance and sediment delivery to the lake are dominant factors that control the limnological and mixing conditions in Lake Arreo and they must be considered in management and restoration plans.     

Effects of the 'Prestige' oil spill on macroalgal assemblages: large-scale comparison

An assessment of the effects of the 'Prestige' oil spill on intertidal, macroalgal assemblages was carried out comparing abundance data obtained before and after the spill. Four zones in the North and Northwest coast of Spain were sampled, one of them located at the immediate vicinity of the spill, the zone most heavily oiled. Macroalgal assemblages had similar structure between years. Neither critical decrease in abundance of the dominant macroalgae, nor increase in opportunistic species were found. Some differences in abundance were observed, but they did not show any pattern, being more likely the result of the natural variability of the assemblage. Extensive, but not intense fuel deposition on the shores and a limited use of aggressive cleanup methods are suggested as possible causes for the lack of the effects in these assemblages after the 'Prestige' oil spill.     

Climatic Warming in the Spanish Mediterranean: Natural Trend or Urban Effect

The evolution of the mean annual temperatures recordedin the major historical network of SpanishMediterranean observatories(36°N–45°/60°W–4°E)exhibits a significant warming trend. Analysis of thetrend is difficult and could be biased by non-climaticprocesses such as the urban effect and weather stationrelocation, which also need to be taken intoaccount.The present work examines the effects of non-climaticprocesses and shows that most of the temperature risecould be due to an urban effect. On correcting for theurban effect, the actual rise was found to be zero ornegligible. The assumption of temperature stability inthe Spanish Mediterranean should thereforenot be rejected.     

Methodology and software solutions for multicriteria evaluation of floodplain retention suitability

Extreme flood events often have adverse effects for people living near or within areas at risk. Reactivating morphological river floodplains for flood retention measures can substantially reduce flood wave peaks and the negative flooding consequences. This article accordingly focuses on a methodology for identifying suitable locations for such measures by spatial multicriteria evaluation (MCE). Compromise programming (CP) and the analytic hierarchy process (AHP) are core methodological components. Furthermore, this methodology is based on impact analysis and draws on expert knowledge. This article also deals with software tools that support the operationalization of methodological components. Data harmonization algorithms are implemented as geoprocessing tools. Both CP and AHP are designed as software providing graphical user interfaces (GUIs). While an extension integrates CP into a geoinformation system, AHP is realized as a web application enabling participation of expert practitioners. The methodological components are operationalized through an example on the floodplains of the German river Elbe.     

The first dinosaur tracksite from Xinjiang, NW China （Middle Jurassic Sanjianfang Formation, Turpan Basin） a preliminary report

A new dinosaur tracksite was discovered in a steeply inclined sandstone layer of the Middle Jurassic Sanjianfang Formation in the Shanshan area of the Turpan Basin. The site is the first record of dinosaur footprints from Xinjiang Province in northwestern China. More than 150 tridactyl theropod dinosaur footprints are preserved as positive hyporeliefs on the lower bedding plane of a fine-grained sandstone body. Most of the footprints are isolated and appear to be randomly distributed. Some show well defined phalangeal pads, heels and rarely indistinct impressions of the distal part of the metatarsus. Two distinct morphotypes are present: a larger type with relatively broad pads shows similarities to Changpeipus and Megalosauripus, and a slightly smaller, slender and gracile type which is similar to Grallator, Eubrontes and Anchisauripus. In both morphotypes, digit III is the longest with a length between 11.4 and 33.6 cm. A single imprint shows prominent scratches, probably formed during slipping of the track maker.     

The topographic data source of digital terrain models as a key element in the accuracy of hydraulic flood modelling

The effects of the topographic data source and resolution on the hydraulic modelling of floods were analysed. Seven digital terrain models (DTMs) were generated from three different altimetric sources: a global positioning system (GPS) survey and bathymetry; high‐resolution laser altimetry data LiDAR (light detection and ranging); and vectorial cartography (1:5000). Hydraulic results were obtained, using the HEC‐RAS one‐dimensional model, for all seven DTMs. The importance of the DTM's accuracy on the hydraulic modelling results was analysed within three different hydraulic contexts: (1) the discharge and water surface elevation results from the hydraulic model; (2) the delineation of the flooded area; and (3) the relative sensitivity of the hydraulic model to changes in the Manning's n roughness coefficient. The contour‐based DTM was the least accurate with a root mean square error (RMSE) of 4·5 m in the determination of the water level and a variation of up to 50 per cent in the estimation of the inundated area of the floodplain. The GPS‐based DTM produced more realistic water surface elevation results and variations of up to 8 per cent in terms of the flooded area. The laser‐based model's RMSE for water level was 0·3 m, with the flooded area varying by less than 1 per cent. The LiDAR data also showed the greatest sensitivity to changes in the Manning's roughness coefficient. An analysis of the effect of mesh resolution indicated an influence on the delineation of the flooded area with variations of up to 7·3 per cent. In addition to determining the accuracy of the hydraulic modelling results produced from each DTM, an analysis of the time–cost ratio of each topographic data source illustrates that airborne laser scanning is a cost‐effective means of developing a DTM of sufficient accuracy, especially over large areas. Copyright © 2006 John Wiley & Sons, Ltd.     

Predicting strain using forward modelling of restored cross-sections: Application to rollover anticlines over listric normal faults

A strategy to predict strain across geological structures, based on previous techniques, is modified and evaluated, and a practical application is shown. The technique, which employs cross-section restoration combined with kinematic forward modelling, consists of restoring a section, placing circular strain markers on different domains of the restoration, and forward modelling the restored section with strain markers until the present-day stage is reached. The restoration algorithm employed must be also used to forward model the structure. The ellipses in the forward modelled section allow determining the strain state of the structure and may indirectly predict orientation and distribution of minor structures such as small-scale fractures. The forward model may be frozen at different time steps (different growth stages) allowing prediction of both spatial and temporal variation of strain. The method is evaluated through its application to two stages of a clay experiment, that includes strain markers, and its geometry and deformation history are well documented, providing a strong control on the results. To demonstrate the method's potential, it is successfully applied to a depth-converted seismic profile in the Central Sumatra Basin, Indonesia. This allowed us to gain insight into the deformation undergone by rollover anticlines over listric normal faults.