Investigation of SVM and Level Set Interactive Methods for Road Extraction from Google Earth Images

Currently, methods of extracting spatial information from satellite images are mainly based on visual interpretations and drawing the consequences by human factor, which is both costly and time consuming. A large volume of data collected by satellite sensors, and significant improvement in spatial and spectral resolution of these images require the development of new methods for optimal use of these data in order to produce rapid economic and updating road maps. In this study, a new automatic method is proposed for road extraction by integrating the SVM and Level Set methods. The estimated probability of classification by SVM is used as input in Level Set Method. The average of completeness, correctness, and quality was 84.19, 88.69 and 76.06% respectively indicate high performance of proposed method for road extraction from Google Earth images.     

Estimation of Pore Volume Compressibility in Carbonate Reservoir Rocks Based on a Classification

Geotechnical and Geological Engineering - This study examined the petrographically classification, petrological and petrophysical characteristics by taking a vast range of carbonate reservoir rock...     

Assessment of 2DH and pseudo‐3D modelling platforms in a large saline aquatic system: Lake Urmia,Iran

The main objective of this paper is to provide comparative quantitative examinations on the capabilities of two‐dimensional horizontal and pseudo‐three‐dimensional (3D) modelling approaches for simulating spatial and temporal variability of the flow and salinity in Lake Urmia, Iran. The water quality in the lake has been an environmentally important subject partly because this shallow hypersaline aquatic ecosystem is considered to be one of the largest natural habitats of a unique multicellular organism, Artemia urmiana. This brine shrimp is the major food source for many of the protected and rare shorebirds that visit the lake. A. urmiana can grow and survive in certain ranges of salinity, and their disappearance could lead to an alteration of existing equilibria. The lake has also experienced considerable man‐made changes during the past three decades. A newly built crossing embankment almost divided the lake into two northern and southern halves. A relatively small opening of 1.25 km in the new embankment provides water connections between the two halves. As a result, the flow and salinity regimes have been significantly changed. This might have had adverse serious impacts on the lake ecosystem. In the current study, the two‐dimensional horizontal hydrodynamic model has been found to provide reasonable predictions for the flow regime in the lake, whereas its salinity predictions have not been consistent with the field observations. The pseudo‐3D model has produced results fairly close to the salinity measurements and its temporal and spatial variations. The pseudo‐3D model has been used for evaluating the embankment effects on the lake hydrodynamics and on the salinity conditions. The effectiveness of introducing a different number or length of openings in the embankment for restoring the pre‐embankment conditions has also been examined. These remedy options have been found not to offer substantial improvements to the lake's existing ecosystem. Copyright © 2013 John Wiley & Sons, Ltd.     

Spatial distribution of cadmium and lead in the sediments of the western Anzali wetlands on the coast of the Caspian Sea (Iran)

Spatial distribution patterns of total cadmium (Cd) and lead (Pb), their bioavailable fractions and total organic matter in sediment from Anzali wetlands are provided. Total sediment Pb was higher than Cd (34.95 versus 0.024 μg/g dry weight). The geoaccumulation index indicated that the sediment was “uncontaminated”, but some stations were categorized as “unpolluted” to “moderately polluted”. Less than 0.01 of Pb existed in exchangeable and carbonate fractions. The sum of exchangeable and carbonate-bound fractions of Cd was 42%, suggesting that Cd poses high risk to the aquatic ecosystems. Total Cd and Pb exhibited positive relationships with total organic matter. Considering spatial distribution maps of total and bioavailable fractions of metals suggested that high concentrations of metals does not necessarily indicate high bioavailable fraction. The methodologies we used in this study can be in more effective management of aquatic ecosystems, as well as ecological risk assessment of metals, and remediation programs.     

Optimization of sulfur adsorption over Ag-zeolite nanoadsorbent by experimental design method

Environmental protection has mentioned the need to cut out all of fuels sulfur compounds. One of the most important processes that affect sulfur removal in atmospheric condition is the interaction of liquid fuels with solid sulfur removal adsorbents such as zeolites. To investigate the nano-AgX-zeolite efficiency for the sulfur adsorption process, a set of experimental tests was arranged and conducted by Box–Behnken design software, in an adsorption laboratory setup. The selected variables comprised metal percent, adsorption temperature and calcination temperature. The parameter levels were 0.5–10 %, 30–120 and 200–500 °C, respectively. The experiment results were used to find the statistical model. The results demonstrate that the sulfur concentration level is 48.36 ppm in the last product at 83 °C for adsorption temperature, 5.53 % for metal percent and 436 °C for calcination temperature in constant pH and constant process time.     

Monitoring and projection of climate change impact on 24-h probable maximum precipitation in the Southeast of Caspian Sea

Natural Hazards - Due to the impacts of climate change on probable maximum precipitation (PMP) and its importance in designing hydraulic structures, PMP estimation is crucial. In this study, the...     

Ascribing soil erosion types for sediment yield using composite fingerprinting technique

Abstract

Soil erosion and eroded sediment are serious threats to sound land management. However, less attention has been given to quantifying the importance of different soil erosion features based on appropriate control measures that could be designated. Accordingly, this research was planned to quantify the contribution of potential sediment sources, i.e. sheet, rill and gully erosion, in Idelo watershed in Zanjan Province, Iran, using composite fingerprinting. Toward this aim, 16 geochemical and organic tracers were detected in sediment sources and sediment deposited at the outlet. The results of applying the composite fingerprinting technique, with a relative error of 16%, showed that sheet, rill and gully sources contributed 56%, 44% and 0%, respectively, to sediment yield. It was also apparent from the results that the composite fingerprinting approach could be successfully utilized to assess the provenance of sediment deposited at the main outlet of the study watershed by soil erosion type.

Editor Z.W. Kundzewicz     

Biomonitoring of Ni and V Contamination Using Oysters (Saccostrea cucullata) at Lengeh Port,Persian Gulf,Iran

Vanadium and nickel are two important indicators of oil pollution. Lengthy exposure to these elements causes serious harmful effects in human health, different harsh allergies being examples. The accumulation of two heavy metals (Ni and V) in sediment and the soft and hard tissues of Saccostrea cucullata were analyzed at three sampling sites along the coast of Lengeh Port, Persian Gulf. Results indicated at all the sampling sites; the Ni levels in soft tissues (STs) were higher than in the shells (SHs) and sediments, whereas the V levels were higher in the sediments. In addition, meaningful relationship (r = 0.65; p < 0.05) was observed across Ni levels in ST of S. cucullata and sediment, while for V concentrations a strong relationship (r = 0.83; p < 0.01) was found in SH of S. cucullata and sediment. This indicates that ST and SH of oyster can be considered as a biomonitoring agent for Ni and V levels, in coastal waters, respectively. The exposure of the consumer is compared directly to minimal risk level and provisional maximum tolerable daily intake. Result indicated that levels of Ni and V were within the safety limits for human consumption.     

The accountability imperative for quantifying the uncertainty of emission forecasts: evidence from Mexico

Governmental climate change mitigation targets are typically developed with the aid of forecasts of greenhouse-gas (GHG) emissions. The robustness and credibility of such forecasts depends, among other issues, on the extent to which forecasting approaches can reflect prevailing uncertainties. We apply a transparent and replicable method to quantify the uncertainty associated with projections of gross domestic product growth rates for Mexico, a key driver of GHG emissions in the country. We use those projections to produce probabilistic forecasts of GHG emissions for Mexico. We contrast our probabilistic forecasts with Mexico’s governmental deterministic forecasts. We show that, because they fail to reflect such key uncertainty, deterministic forecasts are ill-suited for use in target-setting processes. We argue that (i) guidelines should be agreed upon, to ensure that governmental forecasts meet certain minimum transparency and quality standards, and (ii) governments should be held accountable for the appropriateness of the forecasting approach applied to prepare governmental forecasts, especially when those forecasts are used to derive climate change mitigation targets.

POLICY INSIGHTS

• No minimum transparency and quality standards exist to guide the development of GHG emission scenario forecasts, not even when these forecasts are used to set national climate change mitigation targets.

• No accountability mechanisms appear to be in place at the national level to ensure that national governments rely on scientifically sound processes to develop GHG emission scenarios.

• Using probabilistic forecasts to underpin emission reduction targets represents a scientifically sound option for reflecting in the target the uncertainty to which those forecasts are subject, thus increasing the validity of the target.

• Setting up minimum transparency and quality standards, and holding governments accountable for their choice of forecasting methods could lead to more robust emission reduction targets nationally and, by extension, internationally.