In-line response of a cylinder in oscillatory flow

The most widely used mathematical model to represent flow-induced in-line forces on structures is based on the Morison¹ equation. The present paper investigates the validity of using an extension of Morison's equation for non-stationary structures, by comparing predictions with results from a simple laboratory experiment. An elastically-mounted circular cylinder is placed in the sinusoidal flow of a U-tube, and responds in-line with the flow. Cylinder forces and responses are recorded over a range of Keulegan Carpenter numbers up to 35. An equation of motion is solved simply by using relative coordinates and by employing equivalent linearisation. The linear results are compared over a wide variation of parameters with solutions using the full nonlinear equation. Thereafter experimental results are compared with linear predictions.     

Fluid forces on a small cylinder in the presence of a large cylinder in relative oscillatory flow

The present brief paper is intended to show that the fluid forces on a small cylinder can be considerably magnified when it is in the flow field of a larger cylinder. Two cylinders of unequal diameter are oscillated in a tank of fluid, and the lift and in-line forces on the smaller cylinder are measured when the pair of cylinders is placed at various orientations and spacings.     

Diagenetic history and porosity evolution of Upper Carboniferous sandstones from the Spring Valley #1 well, Maritimes Basin, Canada–implications for reservoir development

Eighty-two core samples were collected from the Spring Valley #1 well which penetrates the Upper Carboniferous strata in the Late Devonian–Early Permian Maritimes Basin. The strata consist of alternating sandstones and mudstones deposited in a continental environment. The objective of this study is to characterize the relationship of sandstone porosity with depth, and to investigate the diagenetic processes related to the porosity evolution. Porosity values estimated from point counting range from 0% to 27.8%, but are mostly between 5% and 20%. Except samples that are significantly cemented by calcite, porosity values clearly decrease with depth. Two phases of calcite cement were distinguished based on Cathodoluminescence, with the early phase being largely dissolved and preserved as minor relicts in the later phase. Feldspar dissolution was extensive and contributed significantly to the development of secondary porosity. Quartz cementation was widespread and increased with depth. Fluid inclusions recorded in calcite and quartz cements indicate that interstitial fluids in the upper part of the stratigraphic column were dominated by waters with salinity lower than that of seawater, the middle part was first dominated by low-salinity waters, then invaded by brines, and the lower part was dominated by brines. Homogenization temperatures of fluid inclusions generally increase with depth and suggest a paleogeothermal gradient of 25 °C/km, which is broadly consistent with that indicated by vitrinite reflectance data. An erosion of 1.1–2.4 (mean 1.75) km of strata is inferred to have taken place above the stratigraphic column. δ¹⁸O values of calcite cements (mainly from the late phase) decrease with depth, implying increasing temperatures of formation, as also suggested by fluid-inclusion data. δ¹³C values of calcite cements range from −13.4‰ to −5.7‰, suggesting that organic matter was an important carbon source for calcite cements. A comparison of the porosity data with a theoretical compaction curve indicates that the upper and middle parts of the stratigraphic column show higher-than-normal porosity values, which are related to significant calcite and feldspar dissolution. Meteoric incursion and carboxylic acids generated from organic maturation were probably responsible for the abundant dissolution events.     

Climatic and volcanic forcing revealed in a 50,000-year diatom record from Lake Massoko, Tanzania

The interactions between climatic and volcanic forcing on diatom communities contained in a 50,000-year sedimentary sequence from Lake Massoko, Tanzania, were examined. At the century scale, 19 discrete tephra inputs to the lake isolated the sedimentary nutrient supply and shifted the diatom communities to those tolerant of low phosphorus levels, whereas at the millennial scale, diatom-inferred shifts in precipitation–evaporation based on conductivity optima and diatom life-form ratios were broadly similar to lake-level reconstructions from Lake Rukwa, Lake Malawi, and others in the region. Some fluctuations of Lake Massoko are consistent with the precession-driven changes in insolation, but the major climate shifts do not relate directly to orbital forcing of summer insolation south of the equator and show more consistency with records from the equatorial and northern tropics that receive rainfall from the passing of the intertropical convergence zone. Sea surface temperatures are strongly correlated to multimillennial-scale climate patterns over this region of Africa.     

Regional three-dimensional gravity modelling of the NE Atlantic margin

A series of three‐dimensional models has been constructed for the structure of the crust and upper mantle over a large region spanning the NE Atlantic passive margin. These incorporate isostatic and flexural principles, together with gravity modelling and integration with seismic interpretations. An initial isostatic model was based on known bathymetric/topographic variations, an estimate of the thickness and density of the sedimentary cover, and upper mantle densities based on thermal modelling. The thickness of the crystalline crust in this model was adjusted to equalise the load at a compensation depth lying below the zone of lateral mantle density variations. Flexural backstripping was used to derive alternative models which tested the effect of varying the strength of the lithosphere during sediment loading. The models were analysed by comparing calculated and observed gravity fields and by calibrating the predicted geometries against independent (primarily seismic) evidence. Further models were generated in which the thickness of the sedimentary layer and the crystalline crust were modified in order to improve the fit to observed gravity anomalies. The potential effects of igneous underplating and variable upper mantle depletion were explored by a series of sensitivity trials. The results provide a new regional lithospheric framework for the margin and a means of setting more detailed, local investigations in their regional context. The flexural modelling suggests lateral variations in the strength of the lithosphere, with much of the margin being relatively weak but areas such as the Porcupine Basin and parts of the Rockall Basin having greater strength. Observed differences between the model Moho and seismic Moho along the continental margin can be interpreted in terms of underplating. A Moho discrepancy to the northwest of Scotland is ascribed to uplift caused by a region of upper mantle with anomalously low density, which may be associated with depletion or with a temperature anomaly.     

Regional modelling of permafrost thicknesses over the past 130 ka: implications for permafrost development in Great Britain

The greatest thicknesses of permafrost in Great Britain most likely occurred during the last glacial–interglacial cycle, as this is when some of the coldest conditions occurred during the last 1 000 000 years. The regional development of permafrost across Great Britain during the last glacial–interglacial cycle was modelled from a ground surface temperature history based on mean annual temperatures and the presence of glacier ice. To quantify the growth and decay of permafrost, modelling was undertaken at six locations across Great Britain that represent upland glaciated, lowland glaciated, upland unglaciated and lowland unglaciated conditions. Maximum predicted permafrost depths derived in this academic study range between several tens of metres to over 100 m depending upon various factors including elevation, glacier ice cover, geothermal heat flux and air temperature. In general, the greatest maximum permafrost thicknesses occur at upland glaciated locations, with minimum thickness at lowland sites. Current direct geological evidence for permafrost is from surface or shallow processes, mainly associated with the active layer. Further research is recommended to identify the imprint of freeze/thaw conditions in permanently frozen porous rocks from beneath the active layer.     

A comparison of the early diagenetic environment in intertidal sands and muds of the Manukau Harbour,New Zealand

The early diagenetic environment of intertidal sandy sediments (sands) and muddy sediments (muds) is described and compared from two cores taken from an unpolluted part of the Manukau Harbour, New Zealand. Extraction techniques characterized the form of the trace elements (Fe, Mn, S, C, Pb, Zn, Cu) at different depths in the sediment. Dissolved forms of Fe, Mn, and S were measured in interstitial water. Nonresidual metal concentrations, humic acid, FeS, and FeS₂ are an order of magnitude higher in the muds than in the sands because of dilution by unreactive sand particles. Muds contain a larger proportion of metals in the mobile fractions; exchangeable (Mn), carbonate (Mn, Fe, Zn), and easily-reducible oxide (Fe, Mn, Zn, Pb). This is due to greater surface area (for Mn adsorption); the favorable conditions for MnCO₃, FeCO₃, and FeS precipitation; and higher concentrations of easily reducible iron oxide and humic acid. Therefore, compared to the sands, muds are more important as reservoirs for toxic metals, both in terms of quantity and availability. At either site there was very little difference between the forms of Zn, Pb or Cu identified by sequential extraction as sediments changed from oxic to anoxic conditions. One reason for this is that the amounts and proportions of some of the important components that bind metals, viz., amorphous iron hydrous oxides, humic acids, and FeS₂, do not change much. Other components that do change with redox conditions, for example, manganese phases and FeS, are only minor components of the sediment. Redox conditions, then, have relatively little effect on trace-metal partitioning in the sediment matrix of these unpolluted sediments.     

ENCORE: the effect of nutrient enrichment on coral reefs. Synthesis of results and conclusions

Coral reef degradation resulting from nutrient enrichment of coastal waters is of increasing global concern. Although effects of nutrients on coral reef organisms have been demonstrated in the laboratory, there is little direct evidence of nutrient effects on coral reef biota in situ. The ENCORE experiment investigated responses of coral reef organisms and processes to controlled additions of dissolved inorganic nitrogen (N) and/or phosphorus (P) on an offshore reef (One Tree Island) at the southern end of the Great Barrier Reef, Australia. A multi-disciplinary team assessed a variety of factors focusing on nutrient dynamics and biotic responses. A controlled and replicated experiment was conducted over two years using twelve small patch reefs ponded at low tide by a coral rim. Treatments included three control reefs (no nutrient addition) and three + N reefs (NH4Cl added), three + P reefs (KH2PO4 added), and three + N + P reefs. Nutrients were added as pulses at each low tide (ca twice per day) by remotely operated units. There were two phases of nutrient additions. During the initial, low-loading phase of the experiment nutrient pulses (mean dose = 11.5 microM NH4+; 2.3 microM PO4(-3)) rapidly declined, reaching near-background levels (mean = 0.9 microM NH4+; 0.5 microM PO4(-3)) within 2-3 h. A variety of biotic processes, assessed over a year during this initial nutrient loading phase, were not significantly affected, with the exception of coral reproduction, which was affected in all nutrient treatments. In Acropora longicyathus and A. aspera, fewer successfully developed embryos were formed, and in A. longicyathus fertilization rates and lipid levels decreased. In the second, high-loading, phase of ENCORE an increased nutrient dosage (mean dose = 36.2 microM NH4+; 5.1 microM PO4(-3)) declining to means of 11.3 microM NH4+ and 2.4 microM PO4(-3) at the end of low tide) was used for a further year, and a variety of significant biotic responses occurred. Encrusting algae incorporated virtually none of the added nutrients. Organisms containing endosymbiotic zooxanthellae (corals and giant clams) assimilated dissolved nutrients rapidly and were responsive to added nutrients. Coral mortality, not detected during the initial low-loading phase, became evident with increased nutrient dosage, particularly in Pocillopora damicornis. Nitrogen additions stunted coral growth, and phosphorus additions had a variable effect. Coral calcification rate and linear extension increased in the presence of added phosphorus but skeletal density was reduced, making corals more susceptible to breakage. Settlement of all coral larvae was reduced in nitrogen treatments, yet settlement of larvae from brooded species was enhanced in phosphorus treatments. Recruitment of stomatopods, benthic crustaceans living in coral rubble, was reduced in nitrogen and nitrogen plus phosphorus treatments. Grazing rates and reproductive effort of various fish species were not affected by the nutrient treatments. Microbial nitrogen transformations in sediments were responsive to nutrient loading with nitrogen fixation significantly increased in phosphorus treatments and denitrification increased in all treatments to which nitrogen had been added. Rates of bioerosion and grazing showed no significant effects of added nutrients. ENCORE has shown that reef organisms and processes investigated in situ were impacted by elevated nutrients. Impacts were dependent on dose level, whether nitrogen and/or phosphorus were elevated and were often species-specific. The impacts were generally sub-lethal and subtle and the treated reefs at the end of the experiment were visually similar to control reefs. Rapid nutrient uptake indicates that nutrient concentrations alone are not adequate to assess nutrient condition of reefs. Sensitive and quantifiable biological indicators need to be developed for coral reef ecosystems. The potential bioindicators identified in ENCORE should be tested in future research on coral reef/nutrient interactions. Synergistic and cumulative effects of elevated nutrients and other environmental parameters, comparative studies of intact vs. disturbed reefs, offshore vs. inshore reefs, or the ability of a nutrient-stressed reef to respond to natural disturbances require elucidation. An expanded understanding of coral reef responses to anthropogenic impacts is necessary, particularly regarding the subtle, sub-lethal effects detected in the ENCORE studies.     

Spatial differences in persistent organochlorine pollutant concentrations between the Bering and Chukchi Seas (1993)

During August-September 1993, a joint Russian-United States expedition to the Bering and Chukchi Seas took place. Surface water samples were collected from 21 sites and separated into dissolved (duplicates) and suspended solids; 19 sediment and 6 air samples were also collected. These samples were analysed for 19 organochlorine pesticides, 11 chlorobenzenes and 113 PCB congeners. The report provides data on selected compounds which occured in > or = 75% of the water samples. Highest water concentrations were observed for HCH in open waters north and south of the Bering Strait, both regions being similar (alpha-HCH; 2.2 ng/L and lindane: 0.35 ng/L). Air levels observed were also constant (alpha-HCH; 0.041 ng/m3, lindane: 0.0093 ng/m3). Suspended solids and air particulares contributed little to the concentrations in their respective media, an observation common to all analytes except for the PCBs and the DDT residues. The sum of PCB concentrations in water were higher in the Bering Sea area compared to the Chukchi Sea (1.0 vrs 0.67 ng/L) and lower for air (0.46 vrs 0.23 ng/m3). Sum of DDT in water was higher in the Bering Sea than in the Chukchi Sea (0.23 vrs 0.15 ng/L) while in sediments and air, the Bering Sea concentrations were lower (0.95 vrs 1.6 ng/g and 36 vrs 56 pg/m3, respectively). Other organochlorine compounds for which data are presented include: pp'-DDE, pp'-DDT, dieldrin, HCB, 3 chlorobenzenes and 3 PCB congeners. Fluxes of all these chemicals through the Berin Strait are estimated; they ranged from 57 t/a (alpha-HCH) through 26 t/a (for sum of PCBs) to 0.2 t/a (pp'-DDE, dieldrin and 1,2,3-trichlorobenzene). Fugacity ratios for the HCHs and PCBs indicate the alpha-HCH is degassing in both the Bering and Chukchi Seas and that the gamma-isomer is degassing in the Bering Sea and is close to equilibrium (weakly absorbing) in the Chuchi Sea; the sum of PCBs are strongly absorbing in both areas.