排序方式: 共有13条查询结果,搜索用时 375 毫秒
1.
By M. WIEGNER J. GASTEIGER K. KANDLER B. WEINZIERL K. RASP M. ESSELBORN V. FREUDENTHALER B. HEESE C. TOLEDANO M. TESCHE D. ALTHAUSEN 《Tellus. Series B, Chemical and physical meteorology》2009,61(1):180-194
In the framework of the Saharan Mineral Dust Experiment (SAMUM) for the first time the spectral dependence of particle linear depolarization ratios was measured by combining four lidar systems. In this paper these measurements are compared with results from scattering theory based on the T-matrix method. For this purpose, in situ measurements—size distribution, shape distribution and refractive index—were used as input parameters; particle shape was approximated by spheroids. A sensitivity study showed that lidar-related parameters—lidar ratio S p and linear depolarization ratio δ p —are very sensitive to changes of all parameters. The simulated values of the δ p are in the range of 20% and 31% and thus in the range of the measurements. The spectral dependence is weak, so that it could not be resolved by the measurements. Calculated lidar ratios based on the measured microphysics and considering equivalent radii up to 7.5 μm show a range of possible values between 29 and 50 sr at λ= 532 nm . Larger S p might be possible if the real part of the refractive index is small and the imaginary part is large. A strict validation was however not possible as too many microphysical parameters influence S p and δ p that could not be measured with the required accuracy. 相似文献
2.
By A. SCHLADITZ T. MÜLLER N. KAADEN A. MASSLING K. KANDLER M. EBERT S. WEINBRUCH C. DEUTSCHER A. WIEDENSOHLER 《Tellus. Series B, Chemical and physical meteorology》2009,61(1):64-78
In situ measurements of optical and physical properties of mineral dust were performed at the outskirts of the Saharan Desert in the framework of the Saharan Mineral Dust Experiment part 1 (SAMUM-1). Goals of the field study were to achieve information on the extent and composition of the dust particle size distribution and the optical properties of dust at the ground. For the particle number size distribution, measured with a DMPS/APS, a size dependent dynamic shape factor was considered. The mean refractive index of the particles in this field study is 1.53–4.1 × 10−3 i at 537 nm wavelength and 1.53–3.1 × 10−3 i at 637 nm wavelength derived from measurements of scattering and absorption coefficients, as well as the particle size distribution. Whereas the real part of the refractive index is rather constant, the imaginary part varies depending on the mineral dust concentrations. For high dust concentration the single scattering albedo is primarily influenced by iron oxide and is 0.96 ± 0.02 and 0.98 ± 0.01 at 537 nm and 637 nm wavelength, respectively. During low dust concentration the single scattering albedo is more influenced by a soot-type absorber and is 0.89 ± 0.02 and 0.93 ± 0.01 for the same wavelengths. 相似文献
3.
4.
By BERND HEINOLD INA TEGEN MICHAEL ESSELBORN KONRAD KANDLER PETER KNIPPERTZ DETLEF MÜLLER ALEXANDER SCHLADITZ MATTHIAS TESCHE BERNADETT WEINZIERL ALBERT ANSMANN DIETRICH ALTHAUSEN BENOIT LAURENT REAS MASSLING THOMAS MÜLLER REAS PETZOLD KERSTIN SCHEPANSKI ALFRED WIEDENSOHLER 《Tellus. Series B, Chemical and physical meteorology》2009,61(1):307-324
The regional dust model system LM-MUSCAT-DES was developed in the framework of the SAMUM project. Using the unique comprehensive data set of near-source dust properties during the 2006 SAMUM field campaign, the performance of the model system is evaluated for two time periods in May and June 2006. Dust optical thicknesses, number size distributions and the position of the maximum dust extinction in the vertical profiles agree well with the observations. However, the spatio-temporal evolution of the dust plumes is not always reproduced due to inaccuracies in the dust source placement by the model. While simulated winds and dust distributions are well matched for dust events caused by dry synoptic-scale dynamics, they are often misrepresented when dust emissions are caused by moist convection or influenced by small-scale topography that is not resolved by the model. In contrast to long-range dust transport, in the vicinity of source regions the model performance strongly depends on the correct prediction of the exact location of sources. Insufficiently resolved vertical grid spacing causes the absence of inversions in the model vertical profiles and likely explains the absence of the observed sharply defined dust layers. 相似文献
5.
By N. KAADEN A. MASSLING A. SCHLADITZ T. MÜLLER K. KANDLER L. SCHÜTZ B. WEINZIERL A. PETZOLD M. TESCHE S. LEINERT C. DEUTSCHER M. EBERT S. WEINBRUCH A. WIEDENSOHLER 《Tellus. Series B, Chemical and physical meteorology》2009,61(1):51-63
The Saharan Mineral Dust Experiment (SAMUM) was conducted in May and June 2006 in Tinfou, Morocco. A H-TDMA system and a H-DMA-APS system were used to obtain hygroscopic properties of mineral dust particles at 85% RH. Dynamic shape factors of 1.11, 1.19 and 1.25 were determined for the volume equivalent diameters 720, 840 and 960 nm, respectively.
During a dust event, the hydrophobic number fraction of 250 and 350 nm particles increased significantly from 30 and 65% to 53 and 75%, respectively, indicating that mineral dust particles can be as small as 200 nm in diameter. Log-normal functions for mineral dust number size distributions were obtained from total particle number size distributions and fractions of hydrophobic particles. The geometric mean diameter for Saharan dust particles was 715 nm during the dust event and 570 nm for the Saharan background aerosol.
Measurements of hygroscopic growth showed that the Saharan aerosol consists of an anthropogenic fraction (predominantly non natural sulphate and carbonaceous particles) and of mineral dust particles. Hygroscopic growth and hysteresis curve measurements of the 'more' hygroscopic particle fraction indicated ammonium sulphate as a main component of the anthropogenic aerosol. Particles larger than 720 nm in diameter were completely hydrophobic meaning that mineral dust particles are not hygroscopic. 相似文献
During a dust event, the hydrophobic number fraction of 250 and 350 nm particles increased significantly from 30 and 65% to 53 and 75%, respectively, indicating that mineral dust particles can be as small as 200 nm in diameter. Log-normal functions for mineral dust number size distributions were obtained from total particle number size distributions and fractions of hydrophobic particles. The geometric mean diameter for Saharan dust particles was 715 nm during the dust event and 570 nm for the Saharan background aerosol.
Measurements of hygroscopic growth showed that the Saharan aerosol consists of an anthropogenic fraction (predominantly non natural sulphate and carbonaceous particles) and of mineral dust particles. Hygroscopic growth and hysteresis curve measurements of the 'more' hygroscopic particle fraction indicated ammonium sulphate as a main component of the anthropogenic aerosol. Particles larger than 720 nm in diameter were completely hydrophobic meaning that mineral dust particles are not hygroscopic. 相似文献
6.
By BERNADETT WEINZIERL REAS PETZOLD MICHAEL ESSELBORN MARTIN WIRTH KATHARINA RASP KONRAD KANDLER LOTHAR SCHÜTZ PETER KOEPKE MARKUS FIEBIG 《Tellus. Series B, Chemical and physical meteorology》2009,61(1):96-117
The Saharan Mineral Dust Experiment (SAMUM) was conducted in May/June 2006 in southern Morocco. As part of SAMUM, airborne in situ measurements of the particle size distribution in the diameter range 4 nm < D p < 100 μm were conducted. The aerosol mixing state was determined below D p < 2.5 μm. Furthermore, the vertical structure of the dust layers was investigated with a nadir-looking high spectral resolution lidar (HSRL). The desert dust aerosol exhibited two size regimes of different mixing states: below 0.5 μm, the particles had a non-volatile core and a volatile coating; larger particles above 0.5 μm consisted of non-volatile components and contained light absorbing material. In all cases, particles larger than 10 μm were present, and in 80% of the measurements no particles larger than 40 μm were present. The abundance of large particles showed almost no height dependence. The effective diameter D eff in the dust plumes investigated showed two main ranges: the first range of D eff peaked around 5 μm and the second range of D eff around 8 μm. The two ranges of D eff suggest that it may be inadequate to use one average effective diameter or one parametrization for a typical dust size distribution. 相似文献
7.
8.
9.
10.
Dust mobilization and transport in the northern Sahara during SAMUM 2006 – a meteorological overview
By PETER KNIPPERTZ ALBERT ANSMANN DIETRICH ALTHAUSEN DETLEF MÜLLER MATTHIAS TESCHE EIKE BIERWIRTH TILMAN DINTER THOMAS MÜLLER WOLFGANG VON HOYNINGEN-HUENE KERSTIN SCHEPANSKI MANFRED WENDISCH BERND HEINOLD KONRAD KANDLER REAS PETZOLD LOTHAR SCHÜTZ INA TEGEN 《Tellus. Series B, Chemical and physical meteorology》2009,61(1):12-31
The SAMUM field campaign in southern Morocco in May/June 2006 provides valuable data to study the emission, and the horizontal and vertical transports of mineral dust in the Northern Sahara. Radiosonde and lidar observations show differential advection of air masses with different characteristics during stable nighttime conditions and up to 5-km deep vertical mixing in the strongly convective boundary layer during the day. Lagrangian and synoptic analyses of selected dust periods point to a topographic channel from western Tunisia to central Algeria as a dust source region. Significant emission events are related to cold surges from the Mediterranean in association with eastward passing upper-level waves and lee cyclogeneses south of the Atlas Mountains. Other relevant events are local emissions under a distinct cut-off low over northwestern Africa and gust fronts associated with dry thunderstorms over the Malian and Algerian Sahara. The latter are badly represented in analyses from the European Centre for Medium–Range Weather Forecasts and in a regional dust model, most likely due to problems with moist convective dynamics and a lack of observations in this region. This aspect needs further study. The meteorological source identification is consistent with estimates of optical and mineralogical properties of dust samples. 相似文献