排序方式: 共有29条查询结果,搜索用时 609 毫秒
1.
There is a need to obtain the hydrologic data including ocean current,wave,temperature and so on in the South China Sea.A new profiling instrument which does not suffer from the damage due to nature forces or incidents caused by passing ships,is under development to acquire data from this area.This device is based on a taut single point mid-water mooring system.It incorporates a small,instrumented vertically profiling float attached via an electromechanical cable to a winch integral with the main subsurface flotation.On a pre-set schedule,the instrument float with sensors is winched up to the surface if there is no ship passing by,which is defined by an on-board miniature sonar.And it can be immediately winched down to a certain depth if the sonar sensor finds something is coming.Since,because of logistics,the area can only be visited once for a long time and a minimum of 10 times per day profiles are desired,energy demands are severe.To respond to these concerns,the system has been designed to conserve a substantial portion of the potential energy lost during the ascent phase of each profile and subsequently use this energy to pull the instrument down.Compared with the previous single-point layered measuring mode,it is advanced and economica1.At last the paper introduces the test in the South China Sea. 相似文献
2.
3.
应用LISST-100现场激光粒度仪于2006年8月在北部湾首次进行了悬浮颗粒剖面测量,获得了整个垂直剖面的悬浮颗粒现场粒径分布、体积比和光衰减系数,并计算得到了垂直剖面的总浓度和各层的粒度参数及粒级组成。结果表明,悬浮颗粒自上而下均为双峰分布,只是表层的双峰位于5.57μm和34.4μm,中间层和底层的双峰位于34.4μm和129.4μm。悬浮颗粒体积比自上而下逐渐增大,到达底层时达到最大。光衰减系数的变化趋势与颗粒体积比非常相似,且二者存在很好的相关性,相关系数高达0.98。整个垂直剖面上,表层粒度较细,随着深度增加粒度逐渐变粗,到达底层时粒度最粗。悬浮体总体上正偏,峰态值较小,分选较差。粒度以砂为主,粉砂含量次之,不舍黏土。 相似文献
4.
5.
介绍利用掌上电脑配合激光测量仪实时采集地形数据、建立数字地面模型及进行3维图形表现与方量计算的数据采集与处理系统的开发。该系统适用于电力、煤炭、矿山等堆状物的体积测量和工业场地平整、土石方开挖及开采场地的方量计算。 相似文献
6.
7.
本文结合实例介绍了的 Active X控件的编程技术及其在水文气象数据采集系统研制中的应用 相似文献
8.
9.
10.
Modeling sediment transport depends on several parameters, such as suspended sediment concentration (SSC), shear stress, and settling velocity. To assess the ability of Pulse-Coherent Acoustic Doppler Profiling (PC-ADP) to non-intrusively quantify spatial and temporal SSC and settling velocity at seabed, a field experiment was conducted in the Beibu Gulf (Tonkin Gulf), in the South China Sea. The spatial profiles and temporal variations in SSC at 1 m above bottom were derived from PC-ADP acoustic backscatter intensity determinations after being calibrated with the optical backscatter sensor (OBS) measurements at the same elevation. The PC-ADP and OBS results agreed well. The temporal settling velocity obtained from Rouse profiles agreed well with the Soulsby formula based on size information by LISST (laser in situ scattering and transmissometry). Tides and tidal currents are diurnal in the gulf. SSC increased with increasing ebb and flood flow, and it rapidly decreased with the increase of distance from the seabed. The maximum SSC at 0.16 m and 1.3 m above bottom reached 816 mg/L and 490 mg/L during spring tides, respectively. The sediments consisted of mineral particles 23-162 μm in diameter and 0.05-2.04 cm/s in settling velocity. Generally, both the SSC and settling velocity followed variations in the bottom friction. Results suggest that PC-ADP is able to provide reasonable SSC and settling velocity measurements of both profiles and time series for a long study period. 相似文献