Carbon isotope fractionation between graphite and diamond during shock experiments

Abstract— Carbon isotopic compositions were measured for shock‐produced diamond and shocked graphite formed at peak pressures ranging from 37 to 52 GPa. The δ¹³C values of diamonds produced in a sealed container were generally lower than that of the initial graphite. The differences in the carbon isotopic composition between initial graphite and shocked graphite/diamond may reflect kinetic isotopic fractionation during the oxidation of the graphite/diamond and/or analytical artifacts possibly induced by impurities in the samples. The pressure effect on the isotopic fractionations between graphite and diamond can be estimated from the δ¹³C values of impurity‐free diamonds produced using a vented container from which gases, including oxygen, in pore spaces escaped during or after the diamond formation (e.g., 0.039 ± 0.085‰ at a peak pressure of 52 GPa). Any isotopic fractionation induced by shock conversion of graphite to diamond is too small to be detected in natural shock‐induced diamond‐graphite systems related to terrestrial impact cratering processes.     

Determination of Sr/Sr mass-dependent isotopic fractionation and radiogenic isotope variation of Sr/Sr in the Neoproterozoic Doushantuo Formation

We measured both mass-dependent isotope fractionation of δ⁸⁸Sr (⁸⁸Sr/⁸⁶Sr) and radiogenic isotopic variation of Sr (⁸⁷Sr/⁸⁶Sr) for the Neoproterozoic Doushantuo Formation that deposited as a cap carbonate immediately above the Marinoan-related Nantuo Tillite. The δ⁸⁸Sr and ⁸⁷Sr/⁸⁶Sr compositions showed three remarkable characteristics: (1) high radiogenic ⁸⁷Sr/⁸⁶Sr values and gradual decrease in the ⁸⁷Sr/⁸⁶Sr ratios, (2) anomalously low δ⁸⁸Sr values at the lower part cap carbonate, and (3) a clear correlation between ⁸⁷Sr/⁸⁶Sr and δ⁸⁸Sr values. These isotopic signatures can be explained by assuming an extreme greenhouse condition after the Marinoan glaciation. Surface seawater, mixed with a large amount of freshwater from continental crusts with high ⁸⁷Sr/⁸⁶Sr and lighter δ⁸⁸Sr ratios, was formed during the extreme global warming after the glacial event. High atmospheric CO₂ content caused sudden precipitation of cap carbonate from the surface seawater with high ⁸⁷Sr/⁸⁶Sr and lighter δ⁸⁸Sr ratios. Subsequently, the mixing of the underlying seawater, with unradiogenic Sr isotope compositions and normal δ⁸⁸Sr ratios, probably caused gradual decrease of the ⁸⁷Sr/⁸⁶Sr ratios of the seawater and deposition of carbonate with normal δ⁸⁸Sr ratios. The combination of ⁸⁷Sr/⁸⁶Sr and δ⁸⁸Sr isotope systematics gives us new insights on the surface evolution after the Snowball Earth.     

Primary Ore Mineral Assemblage and Fluid Inclusion Study of the Batu Hijau Porphyry Cu-Au Deposit, Sumbawa, Indonesia

Abstract. The Batu Hijau porphyry Cu‐Au deposit, Sumbawa Island, Indonesia, is associated with a tonalitic intrusive complex. The temperature‐pressure condition of mineralization at the Batu Hijau deposit is discussed on the basis of fluid inclusion microthermometry. Then, the initial Cu‐Fe sulfide mineral assemblage is discussed. Bornite and chalcopyrite are major copper ore minerals associated with quartz veinlets. The quartz veinlets have been classified into ‘A’ veinlets associated with bornite, digenite, chalcocite and chalcopyrite, ‘B’ veinlets having chalcopyrite bornite along vuggy center‐line, rare ‘C’ chalcopyrite‐quartz veinlets, and late ‘D’ veinlets consisting of massive pyrite and quartz (Clode et al., 1999). Copper and gold mineralization is associated with abundant ‘A’ quartz veinlets. Abundant fluid inclusions are found in veinlet quartz consisting mainly of gas‐rich inclusions and polyphase inclusions throughout the veinlet types. The hydrothermal activity occurred in temperature‐pressure conditions of aqueous fluid immiscibility into hypersaline brine and dilute vapor. The halite dissolution (Tm[halite]) and liquid‐vapor homogenization (Th) temperatures of the polyphase inclusions in veinlet quartz range from 270 to 472d?C and from 280 to 454d?C, respectively. The estimated salinity ranges from 36 to 47 wt% (NaCl equiv.). The apparent pressures lower than 300 bars are estimated to have been along the liquid‐vapor‐halite curve for the fluid inclusions having the Th lower than the Tm that trapped the brine saturated with halite, or at slightly higher pressure relative to liquid‐vapor‐halite curve for the fluid inclusions having the Th higher than the Tm that trapped the brine unsaturated with halite. The actual temperature and pressure during the hydrothermal activity at the Batu Hijau deposit are estimated to have been around 300d?C and 50 bars. At such temperature‐pressure conditions, the principal and initial Cu‐Fe sulfide mineral assemblages are thought to be chalcopyrite + bornite solid solution (bnss) for the chalcopyrite‐bearing assemblage, and chalcocite‐digenite solid solution and bnss for the chalcopyrite‐free assemblage.     

Anisotropic phase transition of rutile under shock compression

Shock recovery experiments for single crystal and powdered specimens of TiO₂ with the rutile structure were performed in the pressure range up to 72 GPa. Single crystal specimens were shocked parallel to [100], [110] and [001] directions. X-ray powder diffraction analysis showed that the amount of -PbO₂ type TiO₂ produced by shock-loading depended strongly on the shock propagation direction. The maximum yield (about 70%) was observed for shock loading to 36 GPa parallel to the [100] direction. In the [001] shock direction, the yield is much smaller than that of the [100] direction. This anisotropic yield was consistent with the observed anisotropy of the phase transition pressure in shock compression measurements. However, transformation to the -PbO₂ type cannot explain the large volume change observed above about 20 GPa. On the basis of the high pressure behavior of MnF₂, we assumed that the high pressure phase was either fluorite or distorted fluorite type and that the phase conversion to the -PbO₂ type was induced spontaneously in the pressure reduction process.We present a displacive mechanism of phase transition under shock compression from the rutile structure to the fluorite structure, in which the rutile [100] is shown to correspond to the fluorite [001] or [110] and the rutile [001] to the fluorite [110]. Direct evidence is obtained by examining the [100] shocked specimen by high resolution electron microscopy.     

Symmetrical fft technique and its applications to earthquake engineering

The objective of this paper is to propose an FFT technique symmetrical for time and frequency, in which the symmetrization is done by introducing generating functions. By the symmetrical treatment, it becomes possible to derive several complementary relations in the time and frequency domains. Based on the idea of the symmetrical FFT technique, the phase problem of seismic waves is discussed not only in the frequency domain but also in the time domain. Furthermore, the deconvolution technique to evaluate the minimum-phase-shift and all-pass functions of seismic waves, which is not discussed sufficiently in earthquake engineering, is developed in the two domains. Numerical examples to present these basic ideas are also illustrated in the symmetrical framework.     

Intraspecific crossings ofUndaria pinnatifida (Harv.) Sur.—A possible time-saving way of strain selection

Unicellular gametophytes ofUndaria pinnatifida (Harv.) Sur. were isolated in Qingdao, P. R. China in April 1993 and in Tokushima, southern Japan in March 1995. Different intraspecific crossings by using unicellular male and female gametophytes were successfully undertaken in Sept. of 1995 in Qingdao. Sporophytes were transplanted to two different locations for open sea cultivation. One was at Zhanqiao (ZQ) Bay where the water current was slower than that of another location—Taipingjiao(TPJ). A total of 218 adult sporophytes were harvested on January 12 and 18 from TPJ and ZQ respectively. For eacn combination, 10 sporophytes were cultivated. Analysis of the morphological characteristics of adult sporophytes indicated that the longest length between two bases of the serration of pinnate blades (W2) is a morphological characteristic that can be transferred from the parent plant to the next generations regardless of environmental variations. There was evidence that W2 was apparently determined by sex-linked factors, i.e., by male parental gametophyte. Sporophytes from certain crossing combinations showed more vigorous growth than those from other crossing combinations. It is therefore possible to select gametophyte strains which can be used as parental gametophytes for the seedling production of sporophytes with more vigorous growth within shorter cultivation period. The morphology of hybrids from a Qingdao strain and a Tokushima cultivated strain resembled that of both parental plants in frond features (wrinkled or smooth) and W2. Sporophyll formation also varied with strains. The fact that adult sporophytes resulting from the same crossing combinations have identical morphological characteristics under the same environmental conditions indicates the possibility of a new way to select strains which are expected to be ideal for commerical production by purposely selecting, propagating, and seeding unicellular gametophytes for sporeling production through freeliving techniques of gametophytes. Project 39400102 supported by NSFC, also supported by National Climbing Plan B (PD-B642); and Bioengineering Center, SSTC.     

Mantle process beneath Philippine Sea back-arc spreading ridges: A synthesis of peridotite petrology and tectonics

Abstract In order to obtain a general view of the mantle process beneath a back‐arc basin spreading ridge, the diversity of peridotite petrology and tectonic occurrences in two back‐arc basin spreading ridges from the Philippine Sea were examined: the Parece Vela Rift and the Mariana Trough. The Parece Vela Basin spreading ridge (Parece Vela Rift) was a physically fast/intermediate‐spreading ridge, although many tectono‐magmatic features resemble those of slow‐ to ultraslow‐spreading ridges. Two unusual features of the Parece Vela Rift further demonstrate the uniqueness of the ridge: full‐axial development of oceanic core complexes and exposure of mantle peridotite at segment midpoints. The Parece Vela Rift yields a lithological assemblage of residual but still fertile lherzolite/harzburgite, plagioclase‐bearing harzburgite and dunite; similar assemblages are reported from the equatorial Mid‐Atlantic Ridge at the Romanche Fracture Zone and the ultraslow‐spreading ridges from the Indian and Arctic Oceans. The tectono‐magmatic characteristics of the Parece Vela Rift suggest that diffuse porous melt flow and pervasive melt–mantle interaction were the important mantle processes there. Globally, this ‘porous melt flow‐type’ mantle process is likely to occur beneath a segment midpoint of the ridge having a thick lithosphere, typically an ultraslow‐spreading ridge. In contrast, the Mariana Trough is a typical slow‐spreading ridge, exposing mantle peridotite at segment ends. The Mariana Trough yields a lithological assemblage of residual harzburgite and veined harzburgite, a common assemblage among the global abyssal peridotite suite. The tectono‐magmatic characteristics of the Mariana Trough suggest that channeled melt/fluid flow and limited melt–mantle interaction are the important mantle processes there, because of the colder wall‐rock peridotite in the segment end. This ‘channeled melt flow‐type’ mantle process is likely to occur in the shallow lithospheric mantle at the segment ends of any spreading ridges.     

Groundwater-level Changes Due to Pressure Gradient Induced by Nearby Earthquakes off Izu Peninsula, 1997

Anomalous water level changes were observed at two wells associated with seismic swarm activity off Izu Peninsula on March, 1997. These are coseismic water level drops followed by gradual postseismic water level rise at the time of large earthquakes during the swarm activity. The post-seismic water level rises, which can be fitted by an exponential function with a time constant of about six hours, are explained in terms of the horizontal pressure diffusion due to the pressure gradient in the aquifer induced by the coseismic static strain.     

对流层平流层气溶胶粒子的形态和化学组成

分析研究了１９９３年和１９９４年的８月、９月在香河地区上空采集的单个气溶胶粒子的形态及化学元素和化合物的组成。结果表明：１９９３年,在对流层大气中的气溶胶颗粒经常出现不规则形的粒子,可能是土壤粒子;而在平流层大气中的颗粒以具有“卫星”结构的硫酸粒子为主;硫酸铵粒子则经常出现在对流层的中、下部。香河地区上空颗粒物的化学元素组成比较复杂,单一化学元素组成的粒子较少,粒子主要含有Ｓｉ,Ｆｅ,Ａｌ和Ｓ等元素。气溶胶的化合物有硫酸盐、硅酸盐、硝酸盐和磷酸盐等     

Lagrangian meshfree particles method (SPH) for large deformation and failure flows of geomaterial using elastic–plastic soil constitutive model

Simulation of large deformation and post‐failure of geomaterial in the framework of smoothed particle hydrodynamics (SPH) are presented in this study. The Drucker–Prager model with associated and non‐associated plastic flow rules is implemented into the SPH code to describe elastic–plastic soil behavior. In contrast to previous work on SPH for solids, where the hydrostatic pressure is often estimated from density by an equation of state, this study proposes to calculate the hydrostatic pressure of soil directly from constitutive models. Results obtained in this paper show that the original SPH method, which has been successfully applied to a vast range of problems, is unable to directly solve elastic–plastic flows of soil because of the so‐called SPH tensile instability. This numerical instability may result in unrealistic fracture and particles clustering in SPH simulation. For non‐cohesive soil, the instability is not serious and can be completely removed by using a tension cracking treatment from soil constitutive model and thereby give realistic soil behavior. However, the serious tensile instability that is found in SPH application for cohesive soil requires a special treatment to overcome this problem. In this paper, an artificial stress method is applied to remove the SPH numerical instability in cohesive soil. A number of numerical tests are carried out to check the capability of SPH in the current application. Numerical results are then compared with experimental and finite element method solutions. The good agreement obtained from these comparisons suggests that SPH can be extended to general geotechnical problems. Copyright © 2008 John Wiley & Sons, Ltd.