Helmert方差分量估计在GPS/GLONASS/BDS组合定位权比确定中的应用

因GNSS系统间观测噪声、轨道精度的差异，采用经验权比进行组合定位难以得到最优结果。基于此，在GPS/GLONASS/BDS组合定位中引入Helmert方差分量估计，对GPS/GLONASS/BDS组合单点定位和基线解算中各系统观测值进行合理定权。实验表明，采用该方法确定的伪距观测值最佳权比为5∶1∶1，相位观测值最佳权比为1∶1∶1，有效提高了GPS/GLONASS/BDS组合定位的精度和可靠性。     

Soil and Vegetation Spectral Coupling Difference (SVSCD) for Minerals Extraction from Hyperion Data in Vegetation Covered Area

Remote sensing data have been widely applied to extract minerals in geologic exploration, however, in areas covered by vegetation, extracted mineral information has mostly been small targets bearing little information. In this paper, we present a new method for mineral extraction aimed at solving the difficulty of mineral identification in vegetation covered areas. The method selected six sets of spectral difference coupling between soil and plant (SVSCD). These sets have the same vegetation spectra reflectance and a maximum different reflectance of soil and mineral spectra from Hyperion image based on spectral reflectance characteristics of measured spectra. The central wavelengths of the six, selected band pairs were 2314 and 701 nm, 1699 and 721 nm, 1336 and 742 nm, 2203 and 681 nm, 2183 and 671 nm, and 2072 and 548 nm. Each data set’s reflectance was used to calculate the difference value. After band difference calculation, vegetation information was suppressed and mineral abnormal information was enhanced compared to the scatter plot of original band. Six spectral difference couplings, after vegetation inhibition, were arranged in a new data set that requires two components that have the largest eigenvalue difference from principal component analysis (PCA). The spatial geometric structure features of PC1 and PC2 was used to identify altered minerals by spectral feature fitting (SFF). The collecting rocks from the 10 points that were selected in the concentration of mineral extraction were analyzed under a high-resolution microscope to identify metal minerals and nonmetallic minerals. Results indicated that the extracted minerals were well matched with the verified samples, especially with the sample 2, 4, 5 and 8. It demonstrated that the method can effectively detect altered minerals in vegetation covered area in Hyperion image.     

Approach to Mountain Hazards in Tibet, China

Tibet is located at the southwest boundary of China. It is the main body of the Qinghai-Tibet Plateau, the highest and the youngest plateau in the world. Owing to complicated geology, Neo-tectonic movements, geomorphology, climate and plateau environment, various mountain hazards, such as debris flow, flash flood, landslide, collapse, snow avalanche and snow drifts, are widely distributed along the Jinsha River (the upper reaches of the Yangtze River), the Nu River and the Lancang River in the east, and the Yarlungzangbo River, the Pumqu River and the Poiqu River in the south and southeast of Tibet. The distribution area of mountain hazards in Tibet is about 589,000 km^2, 49.3% of its total territory. In comparison to other mountain regions in China, mountain hazards in Tibet break out unexpectedly with tremendously large scale and endanger the traffic lines, cities and towns, farmland, grassland, mountain environment, and make more dangers to the neighboring countries, such as Nepal, India, Myanmar and Bhutan. To mitigate mountain hazards, some suggestions are proposed in this paper, such as strengthening scientific research, enhancing joint studies, hazards mitigation planning, hazards warning and forecasting, controlling the most disastrous hazards and forbidding unreasonable human exploring activities in mountain areas.     

利用MODIS红外资料反演大气参数以及表层温度的研究

提出了用牛顿非线性迭代法同时反演大气参数和表层温度,该反演算法应用到我国渤海地区MODIS红外资料中,可反演得到中尺度范围内的大气温度、水汽廓线,其误差分别不超过1.5 K和18%.反演得到的表层温度、大气可降水量(TPW)和大气稳定度(TTI)与美国国家宇航局(NASA)MOD07产品相似.     

多接收器电感耦合等离子体质谱法测定镉标准溶液中镉的同位素组成

建立了多接收器电感耦合等离子体质谱仪对Cd标准溶液同位素组成进行分析的实验方法。仪器的质量分馏校正采用Standard-Sample Bracketing法。实验结果用δ114/110Cd来表达。在此研究基础上,以SPEX Cd标准溶液为参考标准,对国外4种Cd标准溶液进行了测定。结果表明,实验测定的精度在0.07‰~0.13‰(δ114/110Cd),与目前文献报道的结果具有相似的精度。以最新SPEX Cd标准样品(δ114/110Cd=0)为基准,计算的δ114/110CdJMC、δ114/110CdSPEX-1、δ114/110CdBAM1012和δ114/110CdM櫣nster的值分别为0.55‰、0.56‰、-0.65‰和5.14‰,说明不同批次SPEX标准溶液的Cd同位素组成是明显不同的,最新的SPEX Cd标准溶液与SPEX-1 Cd的δ114/110Cd值存在着0.56‰的差别。将以SPEX Cd为参考标准的δ114/110CdBAM1012和δ114/110CdM櫣nster转化为以SPEX-1或JMC为参考标准后,得到的结果与文献报道的结果在误差范围内一致。     

Matlab遗传算法工具GUI率定马斯京根模型参数

本文针对传统及改进马斯京根洪水演算模型,利用简单易行的Matlab遗传算法工具(gatool)GUI进行模型参数最优估计,获得不同优化准则下的模型参数,并进行检验.结果表明用Matlab遗传算法工具GUI优选改进后的马斯京根模型参数,收敛能力强、计算时间短、所得演算流量更接近实际.     

扇贝外寄生车轮虫（Trichodina jadranica Raabe，1958）的形态学研究 （原生动物：纤毛门：缘毛目）

采用Ｗｉｌｂｅｒｔ蛋白银法及Ｃｈａｔｔｏｎ—Ｌｗｏｆｆ银浸法对一种附生于栉孔扇贝鳃丝上的寄生车轮虫进行了光镜水平下的研究。依据其形态学和纤毛图式特征，该种被鉴定为ＴｒｉｃｈｏｄｉｎａｊａｄｒａｎｉｃａＲａａｂｅ，１９５８．此为我国新记录，同时也是第一例有关外寄生于扇贝鳃表纤毛虫原生动物的报道。     

玻璃钢渔船船体材料切片之弯曲试验研究

玻璃钢渔船有很多优异的性能，因而有逐渐取代木质渔船的趋势。为推进玻璃钢渔船的产业化进程，作者在查阅了大量国内外有关资料的基础上，进行了玻璃钢渔船体材料切片的弯曲试验，最终提出了我国玻璃钢渔船船体材料切片的弯曲试验规程，以供我国今后制定玻璃钢渔船材料试验标准作参考。     

东太平洋柱状沉积物的古气候和古环境记录

太平洋深海盆地的远洋沉积物在物质组成和来源上远较大陆边缘简单.由于远离大陆,又有海沟与周边大陆分隔,太平洋深海沉积物中通常不包含由河流水系搬运而来的悬浮物,因此从深海沉积物中提取古气候、古环境信息可以避免诸多地质因素相互叠加和干扰[1].深海远洋沉积物中的主要组分是风成陆源碎屑(包括火山碎屑)和来自上层海水的生源组分(降落到洋底的生物壳体)以及由海解作用形成的自生矿物[2],其中陆源碎屑的相对含量、粒度及矿物成分可以反映大气环流的强度及物源区的气候环境[1],生源组分的组成、相对含量和丰度以及种属含量变化则与表层海水的生产力和溶解作用有关.     

南海晚第四纪浮游有孔虫类群变化所表征的古海洋学特征

通过对南海4个岩心的74个样品进行Q型因子分析,求得4个浮游有孔虫组合:亚热带-热带组合,温凉组合,热带易溶组合和亚热带组合。亚热带-热带组合为优势组合,它的发育状况反映了晚第四纪西太平洋热带海水对南海的影响程度,其因子载荷作为古海流特征的参数。温凉组合的发育与南海存在冷涡有关。利用转换函数FP-12E计算了南海南部表层古水温,冰期与间冰期的表层水温平均变化冬季为4.7℃和2.9℃,夏季为3.0℃和2.1℃,季节性温差冰期最大可达8.6℃,间冰期最大可达5.0℃,均比太平洋同一纬度海区的大。冬季表层古水温波动比夏季的大。全新世的表层水温呈上升趋势,但在NS86-43柱中有一变冷现象,这可能和the younger Younger Dryas有关。