路网约束条件下热力规则设计与试验

热力图是一种能直观准确展示空间观测值的有效工具，在多个领域具有广泛应用。本文在分析设定不同道路层权重、道路技术等级分类的基础上，以反距离权重、直方图均衡化、密度补偿、参数多次迭代等方法，研究构建了以热力方式展示道路网分布及发达程度的相关规则体系。热力规则通过道路赋权、路线曲面化、密度协调、图面综合等多套规则的有机结合，实现了道路网总体发达水平信息的提取与展示，并以全球地理信息资源建设项目路网成果中的亚洲和非洲部分国家数据为例，进行了信息提取与热力分布试验。     

Numerical Simulation of Multi-Directional Random Seas

Multi-directional irregular waves are simulated on the basis of the given directional spectrum using a double summation model, a single direction per frequency model and a single summation model. Their results are compared. It is shown that the single direction per frequency model proposed in this paper can generate a realistic wave field. The effects of the model parameters on the simulated results are also studied in this paper and corresponding suggestions are given.     

Three-dimensional numerical simulation of oblique wave action on vertical walls

1 Introduction A vertical wall is one of the typical maritime sheltering structures in the coastal region, which is mainly subjected to wave forces. It has been a com- mon engineering assumption adopted for design pur- poses that normally incident wave fo…     

Observations and Estimations of Directional Spectrum of Sea Waves

The directional spectrum is one of the basic characteristics of sea waves. The observations of directional spectrum of sea waves were successfully conducted at platform Bohai 8 during 1991 and 1992 using a wave gage array for the first time in China. Based on the field data, the directional spectrum which depends on the wave growth is given in this paper. Before observations, the effects of the type of gage array, the distance between the gages and the platform itself on the measured results and the precision of some methods for estimating the directional spectrum were investigated and compared with the methods of numerical simulations and model tests of multi-direcitonal irregular waves. This ensures the quality of the observations and estimations of the directional spectrum.     

Three-dimensional numerical simulation of obfique wave action on vertical walls

A three-dimensional numerical model based on the potential theory was developed to study the oblique wave action on vertical walls. A source term inside the domain was used to generate incident waves and outgoing waves were dissipated by sponge layers and transmitted by radiation boundaries. The finite difference method was used to solve the governing equations and boundary conditions in the regular transformed domain in σ-coordinate. Satisfactory agreements between the numerical predictions and experimental results of wave force were obtained. It is concluded that the maximum wave force acting on the vertical walls is induced by the obliquely incident waves rather than the normally incident waves.     

青藏高原腹地植物碳同位素组成对环境条件的响应

现代植物碳同位素组成是特定环境影响的结果,通过对植物碳同位素组成的研究可以揭示植物生长期环境信息。针对青藏高原腹地高寒草甸~高寒草原过渡区植被碳同位素组成进行研究;该区高山嵩草样δ13C值在-25.63‰~-27.95‰间,平均值-26.63‰;高寒草原区混合样δ13C值于-26.29‰~-27.73‰间,平均值-27.04‰。高山嵩草样δ13C值总体呈现由南东往北西方向正偏趋势,研究区北部高寒草原区混合植物样也呈现出由南向北富重碳同位素趋势。这些变化规律被认为是主要受降水环境影响的结果,而区域内降水条件的展布规律则是受高原夏季风运移方式的控制。对植物δ13C值与地理位置的回归分析表明,该区植被碳同位素组成与地理位置相关,高山嵩草样(r=0.44603,n=29,p<0.05)和混合样(r=0.8112,n=5,p<0.1)均表现出对区域降水环境条件的良好响应。据此,以该区植物δ13C值为背景,进行合理推算,拟定了研究区内干旱区和湿润区界限的位置。     

系统聚类法在华北地区的地震分期和预测中的应用

本文用修改了的系统聚类法研究华北地区地震活动期,结果表明,当类间距离用离差平方和增量距离,且样品间用欧氏距离时,能较好地划分该地区的地震活动期。而样品间用相似系数时,不论类间距离是哪一种,所得结果均较差。本文还作了地震活动期的后验预测尝试,还通过逐次筛选方法对21个特征进行了选择。     

青藏高原东缘晚新生代大邑砾岩的 物源分析与水系变迁*

成都盆地晚新生代碎屑沉积物的快速堆积是青藏高原东缘强烈隆升的产物,同时为青藏高原东缘晚新生代的隆升提供了强有力的证据。文章以盆地底部的大邑砾岩作为研究切入点,详细研究了它的物源区,以深化对青藏高原东缘晚新生代隆升过程的理解。通过砾石成分统计、砂岩薄片鉴定、重矿物分析以及古流向恢复等方面的研究表明,成都盆地北部和南部的大邑砾岩分别受不同的物源区和河流所控制。其中北部的大邑砾岩受控于出口在都江堰南约4km处向南流的河流所控制,其物源区为玉堂镇以西、汶川-茂汶断裂以东的流域范围内。而南部的大邑砾岩则主要受向东流的古青衣江的控制,其物源区即为现代青衣江流域。大邑砾岩的物源分析表明晚新生代期间岷江和青衣江都曾发生河流改道。     

西藏羌塘盆地东部中-上侏罗统沉积特征及沉积相划分

详细野外剖面测量基础上,对羌塘盆地东部中-上侏罗统剖面主要岩类的宏观特征(颜色和构造)、物质组分、结构及磁化率等特征进行系统研究,研究区碎屑岩主要为砾岩、砂岩、粉砂岩和泥岩等岩类,磁化率值呈现低→高→低→高→低(雀莫错组→布曲组→夏里组→索瓦组→雪山组)的规律性变化。综合沉积特征显示雀莫错组和雪山组主要为河流相-河控三角洲相沉积,布曲组为碳酸盐缓坡相沉积为主,夏里组主要为潮坪-泻湖相沉积,索瓦组主要为混积陆棚-泻湖-潮坪相沉积,中-晚侏罗世羌塘盆地古水深在下降的总趋势中呈现浅→深→浅→深→浅的升降旋回,盆地沉积中心由东向西迁移,区域构造演化和全球海平面变化共同控制了盆地沉积面貌。     

硬质合金钎头胎体表面渗硼强化实验研究

对钎头胎体表面渗硼方法和工艺进行了实验研究,给出了有关工艺参数与方法。它对提高硬质合金钎头胎体表面和耐磨性,延长钎头的使用寿命具有积极的意义。