Recommended Values of 239Pu, 240Pu and 239+240Pu Concentrations in Reference Material IAEA-315 (Marine Sediment) Estimated by Thermal Ionisation Mass Spectrometry, Inductively Coupled Plasma-Mass Spectrometry and Alpha Spectrometry

The recommended concentrations of ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu in reference material IAEA‐315 (marine sediment) were estimated by three analytical methods: isotope dilution thermal ionisation mass spectrometry (TIMS), isotope dilution inductively coupled plasma‐mass spectrometry (ICP‐MS) and alpha spectrometry. The determination of ²³⁹Pu and ²⁴⁰Pu (^239+240Pu by alpha spectrometry) was carried out with samples from randomly selected bottles using each method. Plutonium‐238 was also measured by alpha spectrometry. A plutonium‐242 reference material was used as a spike for the quantitative analysis. The influence of ²⁴²Pu in the samples was therefore calculated; however, this contribution was less than the range of uncertainty and did not influence the final results. The obtained data were statistically analysed using variance component analysis and paired comparison. The combined standard uncertainties from “method/measurement”, “bottle” and “sub‐sample” were in the order of 3 to 6%. The main contributions to the uncertainty were from the material heterogeneity and from systematic differences between methods. Based on this study with twenty‐seven analyses using 10–14 g sample mass, concentrations of (38 ± 3) Bq kg^?1, (28 ± 3) Bq kg^?1 and (66 ± 4) Bq kg^?1 are proposed as recommended values for ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu, respectively, and (9.5 ± 0.4) Bq kg^?1 for ²³⁸Pu as an information value in reference material IAEA‐315. In mass concentration units, these amount to (16.4 ± 1.2) ng kg^?1, (3.3 ± 0.4) ng kg^?1 and (0.015 ± 0.003) ng kg^?1 for ²³⁹Pu, ²⁴⁰Pu and ²³⁸Pu, respectively. The certified reference materials NIST 4350B and NIST 4354 were also analysed by TIMS for quality assurance of the method used in this study.     

Variability of Fram Strait sea ice export: causes, impacts and feedbacks in a coupled climate model

Analyses of a 500-year control integration of the global coupled atmosphere–sea ice–ocean model ECHAM5.0/MPI-OM show a high variability in the ice export through Fram Strait on interannual to decadal timescales. This variability is mainly determined by variations in the sea level pressure gradient across Fram Strait and thus geostrophic wind stress. Ice thickness anomalies, formed at the Siberian coast and in the Chukchi Sea, propagate across the Arctic to Fram Strait and contribute to the variability of the ice export on a timescale of about 9 years. Large anomalies of the ice export through Fram Strait cause fresh water signals, which reach the Labrador Sea after 1–2 years and lead to significant changes in the deep convection. The associated anomalies in ice cover and ocean heat release have a significant impact on air temperature in the Labrador Sea and on the large-scale atmospheric circulation. This affects the sea ice transport and distribution in the Arctic again. Sensitivity studies, simulating the effect of large ice exports through Fram Strait, show that the isolated effect of a prescribed ice/fresh water anomaly is very important for the climate variability in the Labrador Sea. Thus, the ice export through Fram Strait can be used for predictability of Labrador Sea climate up to 2 years in advance.     

Three-dimensional sedimentary architecture of Quaternary sand and gravel resources: a case study of economic sedimentology (SW Germany)

Quaternary sands and gravels form important, yet often highly heterogeneous economic deposits. Detailed 3-D analysis of the sedimentary structure and stratigraphy of these deposits allows for an accurate estimation of exploitable material. This paper presents a case study in SW Germany reconstructing the 3-D distribution of glacial sediments based on a high-resolution, process-orientated sedimentary facies classification and lithostratigraphy integrated within the geo-modelling package gOcad. Situated along the maximal ice-extent of the Rhine glacier during the last glaciation, the study area is characterised by a morphologically prominent terminal moraine and its associated sandur, which form the stratigraphically youngest sediments of a glacial basin, partially exposed in two gravel pits. These outcrops helped to reconstruct the complex sedimentary architecture of the northern part of the glacial basin. The regional analysis is based on core data, as well as geoelectric and geomagnetic surveys. All data were integrated into km-scale, high-resolution geological 3-D models, depicting the large-scale dynamics of multiple glacier advances and retreats during the Early to Late Pleistocene. These models allow quantifying the thickness and volume distribution of exploitable sandy gravel and help to evaluate the occurrence of non-exploitable interbedded diamicton horizons. The high quality and quantity of gravels particularly north of the terminal moraine classifies the investigated area as very prospective for raw materials exploitation in the future.     

Biogenic carbon flows through the planktonic food web of the Amundsen Gulf (Arctic Ocean): A synthesis of field measurements and inverse modeling analyses

Major pathways of biogenic carbon (C) flow are resolved for the planktonic food web of the flaw lead polynya system of the Amundsen Gulf (southeast Beaufort Sea, Arctic Ocean) in spring-summer 2008. This period was relevant to study the effect of climate change on Arctic marine ecosystems as it was characterized by unusually low ice cover and warm sea surface temperature. Our synthesis relied on a mass balance estimate of gross primary production (GPP) of 52.5 ± 12.5 g C m⁻² calculated using the drawdown of nitrate and dissolved inorganic C, and a seasonal f-ratio of 0.64. Based on chlorophyll a biomass, we estimated that GPP was dominated by phytoplankton (93.6%) over ice algae (6.4%) and by large cells (>5 μm, 67.6%) over small cells (<5 μm, 32.4%). Ancillary in situ data on bacterial production, zooplankton biomass and respiration, herbivory, bacterivory, vertical particle fluxes, pools of particulate and dissolved organic carbon (POC, DOC), net community production (NCP), as well as selected variables from the literature were used to evaluate the fate of size-fractionated GPP in the ecosystem. The structure and functioning of the planktonic food web was elucidated through inverse analysis using the mean GPP and the 95% confidence limits of every other field measurement as lower and upper constraints. The model computed a net primary production of 49.2 g C m⁻², which was directly channeled toward dominant calanoid copepods (i.e. Calanus hyperboreus 20%, Calanus glacialis 10%, and Metridia longa 10%), other mesozooplankton (12%), microzooplankton (14%), detrital POC (18%), and DOC (16%). Bacteria required 29.9 g C m⁻², a demand met entirely by the DOC derived from local biological activities. The ultimate C outflow comprised respiration fluxes (82% of the initial GPP), a small sedimentation (3%), and a modest residual C flow (15%) resulting from NCP, dilution and accumulation. The sinking C flux at the model limit depth (395 m) supplied 60% of the estimated benthic C demand (2.8 g C m⁻²), suggesting that the benthos relied partly on other C sources within the bottom boundary layer to fuel its activity. In summary, our results illustrate that the ongoing decline in Arctic sea ice promotes the growth of pelagic communities in the Amundsen Gulf, which benefited from a ∼80% increase in GPP in spring-summer 2008 when compared to 2004 – a year of average ice conditions and relatively low GPP. However, 53% of the secondary production was generated within the microbial food web, the net ecological efficiency of zooplankton populations was not particularly high (13.4%), and the quantity of biogenic C available for trophic export remained low (6.6 g C m⁻²). Hence it is unlikely that the increase in lower food web productivity, such as the one observed in our study, could support new harvestable fishery resources in the offshore Beaufort Sea domain.     

Über die Verteilung und Neubildung der nichtkarbonatischen Mineralkomponenten der Oberkreide aus der Umgebung von Hannover

Comparative investigations were made on the non-carbonate components of calcareous sediments of the upper chalk formation of the Hanover region.The mineral composition of the residues insoluble in 0.5 n HC1 has first been determined optically and by X-ray photographs and described. The quantitative analysis of the components contained was effected by microscopic counting using the phase contrast method up to the grain size of 2 u, and for the clay fractions proper by X-ray phase analyses.In addition to the minor components (feldspars, biotite, pyrite, marcasite, glauconite, heavy minerals and mikro-fossils) the residues contain quartz, muscovite, illite, montmorillonite and kaolinite.The calcareous sediments of the upper senon formation are specially characterized by the occurrence of authigenic heulandite crystals which could be analysed and described here for the first time. Moreover secondary crystallization of quartz, turmaline and albite could be observed in all the samples analysed.     

Zur Frage der Normung und Darstellung des Regelungsgrades von Gefügediagrammen

Zusammenfassung Die Wahl des Zählpunktabstandes für die Auszählung von Gefügediagrammen auf dem Schmidtschen Netz wird diskutiert. Es wird gezeigt, daß bei Verwendung eines Zählpunktabstandes von 0.5 cm die Schwerpunkte der Maxima der Polverteilung mit genügender Genauigkeit erfaßt werden. Als Zählfläche wird der Kreis von 1% der Netzfläche gewählt. Verwendung von Zählkreisen verschiedener Größe in einem Diagramm führt zu falschen Ergebnissen. Es wird eine Norm für das Auszählen vorgeschlagen, um Gefügediagramme reproduzierbar zu machen.Für die Darstellung des Regelungsgrades wird eine Methode vorgeschlagen, die vom Gefügediagramm ausgeht, aber auf der tatsächlichen Polverteilung fußt und ohne große Rechenoperationen auskommt. Durch diese Methode lassen sich gleichartige Gefügediagramme verschiedener Polzahl miteinander vergleichen.

---

Summary The grid size for counting fabric diagrams on the Schmidt net is discussed. It can be shown that counting out at each corner of a 0.5 cm square grid will grant sufficient accuracy in indicating the location of each maximum of the diagram. A circle of 1% of the Schmidt net's area is chosen to act as counting circle. Inaccuracies will occur if counting circles with different areas are used for counting the same fabric diagram. A rule for counting fabric diagrams is proposed in order to make the diagrams reproduceable.A method is proposed for computation of the degree of orientation. This method uses the counted and contoured fabric diagram, but it is based on the real distribution of the points, and no great computations are involved. This method allows fabric diagrams derived from different numbers of poles to be compared.

---

---

Mit 17 Textabbildungen

---

Nach einem Vortrag, gehalten am 11. Mai 1964 vor der Österreichischen Mineralogischen Gesellschaft in Wien.     

What causes the spread of model projections of ocean dynamic sea-level change in response to greenhouse gas forcing?

Sea levels of different atmosphere–ocean general circulation models (AOGCMs) respond to climate change forcing in different ways, representing a crucial uncertainty in climate change research. We isolate the role of the ocean dynamics in setting the spatial pattern of dynamic sea-level (ζ) change by forcing several AOGCMs with prescribed identical heat, momentum (wind) and freshwater flux perturbations. This method produces a ζ projection spread comparable in magnitude to the spread that results from greenhouse gas forcing, indicating that the differences in ocean model formulation are the cause, rather than diversity in surface flux change. The heat flux change drives most of the global pattern of ζ change, while the momentum and water flux changes cause locally confined features. North Atlantic heat uptake causes large temperature and salinity driven density changes, altering local ocean transport and ζ. The spread between AOGCMs here is caused largely by differences in their regional transport adjustment, which redistributes heat that was already in the ocean prior to perturbation. The geographic details of the ζ change in the North Atlantic are diverse across models, but the underlying dynamic change is similar. In contrast, the heat absorbed by the Southern Ocean does not strongly alter the vertically coherent circulation. The Arctic ζ change is dissimilar across models, owing to differences in passive heat uptake and circulation change. Only the Arctic is strongly affected by nonlinear interactions between the three air-sea flux changes, and these are model specific.

     

Bedload transport measurements with impact plate geophones: comparison of sensor calibration in different gravel‐bed streams

Indirect bedload transport measurements have been made with the Swiss plate geophone system in five gravel‐bed mountain streams. These geophone sensors record the motion of bedload particles transported over a steel plate mounted flush with the channel bed. To calibrate the geophone system, direct bedload transport measurements were undertaken simultaneously. At the Erlenbach in Switzerland, a moving‐basket sampler was used. At the Fischbach and Ruetz streams in Austria, a Helley–Smith type bedload sampler provided the calibration measurements. A Bunte‐type bedload trap was used at the Rofenache stream in Austria. At the Nahal Eshtemoa in Israel, Reid‐type slot bedload samplers were used. To characterize the response of the geophone signal to bedload particles impacting on the plate, geophone summary values were calculated from the raw signal and stored at one second intervals. The number of impulses, i.e. the number of peaks above a pre‐defined threshold value of the geophone output signal, correlated well with field measured gravel transport loads and was found to be a robust parameter. The relations of impulses to gravel transport loads were generally near‐linear, but the steepness of the calibration relations differed from site to site. By comparing the calibration measurements from the different field sites and utilizing insights gained during preliminary flume experiments, it has been possible to identify the main factors that are responsible for site specific differences in the calibration coefficient. The analysis of these calibration measurements indicates that the geophone signal also contains some information about the grain size distribution of bedload. Copyright © 2013 John Wiley & Sons, Ltd.     

Estimating trends of Atlantic meridional overturning circulation from long-term hydrographic data and model simulations

The ocean meridional overturning circulation (MOC) plays a central role for the climate in the Atlantic realm. Since scenarios for future climate change indicate a significant reduction of the MOC under global warming, an assessment of variations and trends of the real MOC is important. Using observations at ocean weather ship (OWS) stations and along oceanic sections, we examine the hydrographic information that can be used to determine MOC trends via its signature in water mass properties obtained from model simulations with the climate model ECHAM5/MPI-OM. We show that temperature trends at mid-latitudes provide useful indirect measure of large-scale changes of deep circulation: A mid-depth warming is related to MOC weakening and a cooling to MOC strengthening. Based on our model experiments, we argue that a continuation of measurements at key OWS sites may contribute to a timely detection of a possible future MOC slowdown and to separate the signal from interannual-to-multidecadal MOC variability. The simulations suggest that the subsurface hydrographic information related to MOC has a lower variability than the MOC trend measured directly. Based on our model and the available long-term hydrographic data, we estimate non-significant MOC trends for the last 80 years. For the twenty-first century, however, the model simulations predict a significant MOC decline and accompanied mid-depth warming trend.