Magnetic Reconnection and Extraplanar Diffuse Ionized Gas

Photoionization by stars cannot be the only cause for the diffuseionized gas component in the distant halos of galaxies.Quasistationary localized magnetic reconnection can efficientlycontribute to the ionization of the extraplanar halo gas. The gas isheated and re-ionized in numerous current filaments fast enough tocompensate recombination. The necessary magnetic energy is provided bythe disk activity.     

The geochemistry of gem opals as evidence of their origin

Seventy-seven gem opals from ten countries were analyzed by inductively coupled plasma-mass spectrometry (ICP-MS) through a dilution process, in order to establish the nature of the impurities. The results are correlated to the mode of formation and physical properties and are instrumental in establishing the geographical origin of a gem opal. The geochemistry of an opal is shown to be dependant mostly on the host rock, at least for examples from Mexico and Brazil, even if modified by weathering processes. In order of decreasing concentration, the main impurities present are Al, Ca, Fe, K, Na, and Mg (more than 500 ppm). Other noticeable elements in lesser amounts are Ba, followed by Zr, Sr, Rb, U, and Pb. For the first time, geochemistry helps to discriminate some varieties of opals. The Ba content, as well as the chondrite-normalized REE pattern, are the keys to separating sedimentary opals (Ba > 110 ppm, Eu and Ce anomalies) from volcanic opals (Ba < 110 ppm, no Eu or Ce anomaly). The Ca content, and to a lesser extent that of Mg, Al, K and Nb, helps to distinguish gem opals from different volcanic environments. The limited range of concentrations for all elements in precious (play-of-color) compared to common opals, indicates that this variety must have very specific, or more restricted, conditions of formation. We tentatively interpreted the presence of impurities in terms of crystallochemistry, even if opal is a poorly crystallized or amorphous material. The main replacement is the substitution of Si⁴⁺ by Al³⁺ and Fe³⁺. The induced charge imbalance is compensated chiefly by Ca²⁺, Mg²⁺, Mn²⁺, Ba²⁺, K⁺, and Na⁺. In terms of origin of color, greater concentrations of iron induce darker colors (from yellow to “chocolate brown”). This element inhibits luminescence for concentrations above 1000 ppm, whereas already a low content in U (≤ 1 ppm) induces a green luminescence.     

Experimental solidification of anhydrous latitic and trachytic melts at different cooling rates: The role of nucleation kinetics

Two sets of cooling experiments were run at atmospheric conditions for two anhydrous starting latitic and trachytic melts: 1) five cooling rates (25, 12.5, 3, 0.5, and 0.125 °C/min) between 1300° and 800 °C, and 2) a 0.5 °C/min cooling rate from 1300 °C with quench temperatures at 1200°, 1100°, 1000° and 900 °C. Trachytic run-products are invariably glassy. Nucleation is also suppressed in the latitic run-products at the three highest cooling rates. Conversely, in the 0.5 and 0.125 °C/min runs, latites have a crystal content of  90 vol.%. The phases are: plagioclase, clinopyroxene, glass and iron-bearing oxide (in order of abundance). The variable quench temperatures, investigated by coupling experiments with Pt wire and Pt capsule sample containers in set 2, again did not produce crystallization of trachyte, whereas latitic samples are characterized by  10 vol.% of oxides, pyroxenes and plagioclase (in order of appearance), at temperature < 1000 °C. Effects of (preferential) heterogeneous nucleation on sample holders, of superheating degree, and chemical species loss during cooling are absent for both melt compositions. The difference of solidification paths between these two silicate melts can be ascribed only to their small chemical differences. In comparison with calculated equilibrium conditions all the experimental latitic and trachytic run-products revealed strong kinetic effects, interpretable in the light of the nucleation theory. The glass-forming ability (GFA) of trachyte is higher, whereas their critical cooling rate (Rc) is lower (< 0.125 °C/min), in comparison to latitic melts (Rc > 0.5 °C/min). The experimental results carried out in this study can be applied to lava flows and domes; trachytic lavas are able to flow for longer period with respect to latitic ones in a metastable condition. Glass-rich terrestrial lavas, i.e. obsidians, can be the result of sluggish nucleation kinetics due to the relative high polymerisation of evolved silicate melts.     

Organizational Dynamics of the U.S. Logistics Industry: An Economic Geography Perspective*

Although the logistics industry provides critical services to all sectors of the economy, few studies exist in economic geography that examine and explain the organizational dynamics of this industry. This article highlights the significance of the logistics industry in contemporary industrialization and argues that an enriched understanding of the interaction between technology and space can be achieved by examining the evolution of an industry that plays a central role in the contemporary economy. We focus on dimensions that are identified as particularly important: organizational, geographic, and risk and security.     

Fractal analysis of mingled/mixed magmas: an example from the Upper Pollara eruption (Salina Island, southern Tyrrhenian Sea, Italy)

Upper Pollara eruption products (13 ka, Salina Island, Italy) include both homogeneous and heterogeneous pumices resulting from mixing/mingling processes between an HK andesite and a high-SiO₂ rhyolite. Representative samples of heterogeneous pumices are collected and analyzed in order to check the correspondence between glass composition and morphological features of the mingling/mixing structures. Image analysis techniques are applied and eight grey color ranges (classes) are extracted from high-resolution scans of pumice. Class 1 (lighter colors) and class 8 (darker colors) show end-member glass compositions, i.e. HK andesite and high-SiO₂ rhyolite, respectively. These two classes show spot- to cluster-like morphological structures. Intermediate classes show an HK dacitic to rhyolitic composition and a banding- to fold-like morphology. Fractal analysis by box-counting of the boundary pattern of eight grey classified images is performed over a length scale of 0.028–1.8 cm. Fractal dimension D is between 1.01 and 1.84. Coupled fractal analysis and geochemical data reveal that D increases as the degree of magma interaction (homogenization) increases. This feature well fits the results from numerical models on the convective mixing of fluids driven by thermal convection. We conclude that the increase of D observed in the Upper Pollara samples reflects the transition from fractal mixing to homogenization. End-member magmas (HK andesite and high-SiO₂ rhyolite) represent isolated mixing regions, while homogenized magmas represent active mixing regions. In the analyzed pumices, isolated and active mixing regions coexist at scales between 10⁻⁴ and 10⁻² m. Morphological and compositional features of the Upper Pollara pumices result from turbulence.     

New unspiked K–Ar ages of volcanic rocks of the central and western sector of the Aeolian Islands: reconstruction of the volcanic stages

A geochronological study of the Filicudi, Salina, Lipari and Vulcano Islands (Aeolian Archipelago) using the unspiked potassium–argon technique provides new age data which, combined with stratigraphic correlation, better constrain the temporal evolution of volcanism. The unspiked K–Ar age of the oldest exposed lavas on Filicudi, 219±5 ka, is significantly younger than the previous estimation of 1.02 Ma. In the general context of Aeolian volcanism, this new date suggests that the volcanism of the western sector of the Aeolian Archipelago is younger than previously thought. Geochronological data point out on the rapid transition from calc–alkaline to potassic volcanism. The distribution of the K–Ar ages within the Salina–Lipari–Vulcano group shows that the volcanism started on Lipari and propagated over time northward on Salina and southward on Vulcano. Geochronological and geophysical data suggest that the onset of volcanism in the central sector of the Aeolian Arc may be due to a mantle upwelling structure located below Lipari. A change in the style of the eruptions occurred in the Salina–Lipari–Vulcano system at about 100 ka from the present. Low-energy magmatic eruptions occurred between 188 and about 100 ka. From about 100 ka to the present, higher-energy eruptions and low-energy events due to magma–water interaction also occurred. This change in the style of activity, together with the appearance of evolved products (i.e. rhyolites) during the last 50 ka, is consistent with the formation of magmatic reservoirs located at shallower depth with respect to those of the 188–100-ka period. The new geochronological data and available petrological models reveal that a change in the deep source of the primary magmas occurred in a relatively short time interval.     

Climate control on stacked paleosols in the Pleistocene of the Po Basin (northern Italy)

Paleosols are recurrent features in alluvial successions and provide information about past sedimentary dynamics and climate change. Through sedimentological analysis on six sediment cores, the mud-dominated succession beneath the medieval ‘Two Towers’ of Bologna was investigated down to 100 m depth. A succession of weakly developed paleosols (Inceptisols) was identified. Four paleosols (P1, P2, P3 and PH) were radiocarbon-dated to 40–10 cal ka bp . Organic matter and CaCO₃ determinations indicate low groundwater levels during soil development, which spanned periods < 5 ka. The development and burial of soils, which occurred synchronously in the Bologna region and in other sectors of the Po Plain, are interpreted to reflect climatic and eustatic variations. Climatic oscillations, at the scale of the Bond cycles, controlled soil development and burial during Marine Isotope Stage (MIS) 3 (P1 and P2). Rapid sea-level oscillations probably induced soil development at the MIS 3/2 transition (P3) and favored burial of PH after 10 ka bp . Weakly developed paleosols in alluvial successions can provide clues to millennial-scale climatic and environmental variations. In particular, the paleosol-bearing succession of the Po Plain represents an unprecedent record of environmental changes across the Late Pleistocene (MIS 3 and 2) in the Mediterranean region.     

Impact of drilling mud on chemistry and microbiology of an Upper Triassic groundwater after drilling and testing an exploration well for aquifer thermal energy storage in Berlin (Germany)

After completion of an exploration well, sandstones of the Exter Formation were hydraulically tested to determine the hydraulic properties and to evaluate chemical and microbial processes caused by drilling and water production. The aim was to determine the suitability of the formation as a reservoir for aquifer thermal energy storage. The tests revealed a hydraulic conductivity of 1–2 E-5 m/s of the reservoir, resulting in a productivity index of 0.6–1 m³/h/bar. A hydraulic connection of the Exter Formation to the overlaying, artesian “Rupelbasissand” cannot be excluded. Water samples were collected for chemical and microbiological analyses. The water was similarly composed as sea water with a maximum salinity of 24.9 g/L, dominated by NaCl (15.6 g/L Cl and 7.8 g/L Na). Until the end of the tests, the water was affected by drilling mud as indicated by the high pH (8.9) and high bicarbonate concentration (359 mg/L) that both resulted from the impact of sodium carbonate (Na₂CO₃) additives. The high amount of dissolved organic matter (>?58 mg/L) and its molecular-weight distribution pattern indicated that residues of cellulose, an ingredient of the drilling mud, were still present at the end of the tests. Clear evidence of this contamination gave the measured uranine that was added as a tracer into the drilling mud. During fluid production, the microbial community structure and abundance changed and correlated with the content of drilling mud. Eight taxa of sulfate-reducing bacteria, key organisms in processes like bio-corrosion and bio-clogging, were identified. It can be assumed that their activity will be affected during usage of the reservoir.     

Palaeo-environmental and dietary analysis of intestinal contents of a mammoth calf (Yamal Peninsula,northwest Siberia)

Intestinal samples from the one-month-old Siberian mammoth calf ‘Lyuba’ were studied using light microscopy and ancient DNA to reconstruct its palaeo-environment and diet. The palynological record indicates a ‘mammoth steppe’. At least some pollen of arboreal taxa was reworked, and thus the presence of trees on the landscape is uncertain. In addition to visual comparison of 11 microfossil spectra, a PCA analysis contributed to diet reconstruction. This yielded two clusters: one of samples from the small intestine and the other of large-intestine samples, indicating compositional differences in food remains along the intestinal tract, possibly reflecting different episodes of ingestion. Based on observed morphological damage we conclude that the cyperaceous plant remains and some remains of dwarf willows were originally eaten by a mature mammoth, most likely Lyuba’s mother. The mammoth calf probably unintentionally swallowed well-preserved mosses and mineral particles while eating fecal material deposited on a soil surface covered with mosses. Coprophagy may have been a common habit for mammoths, and we therefore propose that fecal material should not be used to infer season of death of mammoths. DNA sequences of trnL and rbcL genes amplified from ancient DNA extracted from intestinal samples confirmed and supplemented plant identifications based on microfossils and macro-remains. Results from different extraction methods and barcoding markers complemented each other and show the value of longer protocols in addition to fast and commercially available extraction kits.