Absolute and relative amplitudes of variations in radius of classical cepheids

On the basis of observational data for the absolute R and relative R/R amplitudes of variations in radius of galactic classical cepheids (55 stars from Balona and Stobie (1979) and 30 stars from Sollazzoet al. (1981)), four kinds of empirical linear relations are obtained: log(P V)–logR, logP–logR, log(P V)–log(R/R), and logP–log(R/R);P, R, and V are the pulsation periods, the mean stellar radii, and the amplitudes of light variations, respectively. Three groups of stars are considered: short-period cepheids (SPC)-with logP1.1; long-period cepheids (LPC)-with logP>1.1; and s-cepheids (sC). Both the R values and the R/R values increase withP andP V, for a given group of variables. A comparison is performed with our results obtained from data in other sources (Kurochkin, 1966; Gieren, 1982; etc.). The investigated relations can be applied for determining R and R/R of galactic classical cepheids, by using their observedP and V. All studied galactic classical cepheids have R/R<0.35, R<10R for SPC and 10R <R60R for LPC. The sC have smaller R and R/R values than other classical cepheids, at the same periods (the difference is about 2 times for R and 1.4–2.8 times for R/R); the studied sC have R/R in the range 0.025–0.075 and R in the range 1–3R (only Y Oph has R8R ).     

Population I pulsating stars

The radiiR and surface gravitiesg of Population I pulsating stars (89 Delta Scuti-variables and 155 classical cepheids) have been investigated. Semi-empirical period-radius (P-R) and period-gravity (P-g) relations are obtained for Delta Scuti-stars (for the four lowest modes of radial pulsations) and for classical cepheids. For Delta Scuti-stars, the uncertainties of radius and gravity estimations calculated from theP-R andP-g relations for different modes, are evaluated. There is a good agreement both between theP-R relations and between theP-g relations for Delta Scuti-stars and for classical cepheids, but a gap exists between the two types of variables. From models of Delta Scuti-stars, theoreticalP-R andP-g relations for the four lowest modes of radial pulsations are obtained, in a good agreement with the corresponding semi-empirical relations. There is an excellent agreement between the theoretical and semi-empirical period ratios of radial pulsations as derived from theP-R andP-g relations for Delta Scuti-stars. It is not necessary to take into account the colours (in addition to the periods), in order to estimate the radii and gravities of the variables under study.     

Flow Characteristics of Cemented Paste Backfill

Cemented paste backfill (CPB) is primarily used for backfilling underground voids at George Fisher Mine (Mount Isa, Australia). The objective of this paper is to summarise the geotechnical characterisation of the tailings and the rheological properties of the CPB as determined from a laboratory testing program undertaken at James Cook University. Two binders were examined [a General Purpose cement and a slag blend cement] over a range of dosages from 0 to 6% and CPB mix solids content in the range of 72–78%. The slump tests were carried out using the standard cone (ASTM C 143) used for concrete and a cylinder with 110 mm (diameter) × 110 mm (height), whereas the yield stress was measured using a shear vane (Brookfield vane spindle V-73). The index characteristics of the tailings including the grain size distribution, liquid limit, plastic limit, specific gravity were determined as per ASTM standards. This paper will then discuss the interrelationships among the solid content, slump, saturated density and the yield stress of the CPB. It is shown that there is strong correlation between the two different slump test devices used in this study. The smaller cylindrical device appears to have good potential for slurries like mine tailings or dredged mud that have high water content for slump test. There is also strong inter-relationship among solid content, slump, yield stress, and bulk density. Increasing the solid content increases the bulk density and yield stress, but reduces the slump. While there is hardly any difference between the two binder types used in this study in terms of flow parameters, namely the yield stress and slump, the binder dosage has an effect. At any specific solid content, higher binder dosages lead to a drop in the slump and increase in the yield stress. The difference is more pronounced in dense slurries. It is also strongly believed that the trends and relationships developed in this study may be valuable for the other mining operations using CPB.     

GhostNet marine debris survey in the Gulf of Alaska--satellite guidance and aircraft observations

Marine debris, particularly debris that is composed of lost or abandoned fishing gear, is recognized as a serious threat to marine life, vessels, and coral reefs. The goal of the GhostNet project is the detection of derelict nets at sea through the use of weather and ocean models, drifting buoys and satellite imagery to locate convergent areas where nets are likely to collect, followed by airborne surveys with trained observers and remote sensing instruments to spot individual derelict nets. These components of GhostNet were first tested together in the field during a 14-day marine debris survey of the Gulf of Alaska in July and August 2003. Model, buoy, and satellite data were used in flight planning. A manned aircraft survey with visible and IR cameras and a LIDAR instrument located debris in the targeted locations, including 102 individual pieces of debris of anthropogenic or terrestrial origin.     

Movement patterns of an endemic South African sparid,the black musselcracker Cymatoceps nasutus,determined using mark-recapture methods

This study made use of data from three long-term fish tagging projects along the South African coastline to investigate the movement behaviour of the endemic black musselcracker Cymatoceps nasutus (Sparidae). From 1984 to 2016, a total of 3 430 C. nasutus (178–980 mm fork length) were tagged (with small plastic dart tags) throughout the species’ distributional range, with an overall reported recapture rate of 7.2%. Recaptured individuals displayed high levels of residency, moving an average of 14.8 km, with time-at-liberty ranging from 0 to 6 809 days. The majority of recaptures (84.6%) were made within 1 km of the tagging sites; however, some large-scale movements, of up to 528 km, were recorded. Although C. nasutus individuals moving greater distances were characterised by greater mean sizes (mm fork length) at time of recapture, the distances moved by juveniles were not significantly different from those of adults (p > 0.05). Low levels of connectivity among coastal regions were therefore expected due to the high degree of residency displayed by this species. Combining traditional management approaches together with a well-designed network of no-take marine protected areas is likely to be the most effective way to protect this vulnerable species. A lack of data on the movements of adults remains a challenge, but this could be overcome by tracking large individuals tagged with long-life acoustic transmitters.     

Marine debris collects within the North Pacific Subtropical Convergence Zone

Floating marine debris, particularly derelict fishing gear, is a hazard to fish, marine mammals, turtles, sea birds, coral reefs, and even human activities. To ameliorate the economic and environmental impact of marine debris, we need to efficiently locate and retrieve dangerous debris at sea. Guided by satellite-derived information, we made four flights north of Hawaii in March and April 2005. During these aerial surveys, we observed over 1800 individual pieces of debris, including 122 derelict fishing nets. The largest debris concentrations were found just north of the North Pacific Transition Zone Chlorophyll Front (TZCF) within the North Pacific Subtropical Convergence Zone (STCZ). Debris densities were significantly correlated with sea-surface temperature (SST), chlorophyll-a concentration (Chla), and the gradient of Chla. A Debris Estimated Likelihood Index (DELI) was developed to predict where high concentrations of debris would be most likely in the North Pacific during spring and early summer.     

Health profiles of Hamilton: Spatial characterisation of neighbourhoods for health investigations

This paper is part of a larger research program which employs a mixed-methods approach to study the determinants of health at the local level using specific neighborhoods in Hamilton, Ontario, Canada. In this paper, multivariate, spatial statistical techniques and geographic information systems are used to address questions about the characterization of neighbourhoods, based on socioeconomic determinants of health and risk factors such as smoking. While neighbourhood characterization has been a component of public health surveillance for some time, geostatistical techniques can now be used to derive more accurate representation of neighbourhoods for use in subsequent analysis. We utilize principal components analysis to reduce the data and extract the components that represent the underlying local processes. Principal components are also overlayed on comparative mortality figures to visualize where the socio-demographic determinants of health correspond spatially with mortality patterns. Predicted values from the components are then analysed for spatial clustering using local indicators of spatial association. The findings reveal a pattern of distinct neighbourhoods that will be used in subsequent quantitative and qualitative stages in the larger research programme. The results can also be used to inform public health policy and to target public health interventions.     

DISCRIMINANT PRINCIPAL COMPONENTS ANALYSIS

When the number of variables exceeds the number of samples, one method of multivariate discriminationis to use principal components analysis to reduce the dimensionality and then to perform canonicalvariates analysis (PC-CVA). This paper proposes an alternative approach in which discriminant analysisis carried out by a weighted principal component analysis of the group means (DPCA). This method doesnot require prior data reduction and produces discriminant factors that are orthogonal in the original dataspace. The theory and performance of the two methods are compared. Although the individual factors ofDPCA are found to be less discriminating than PC-CVA, the overall discrimination, calculated bymultivariate analysis of variance, and the predictive value, estimated by the leaving-one-out error rate,are broadly comparable.     

Reflection on the first five years of South Africa’s Acoustic Tracking Array Platform (ATAP): status,challenges and opportunities

The Acoustic Tracking Array Platform (ATAP) is a marine science programme that monitors the movements and migrations of inshore marine animals along the South African coastline. Acoustically tagged animals are monitored by an expanded network of approximately 100 automated data-logging acoustic receivers moored at strategic node sites, from Cape Point in the west to the South Africa–Mozambique border in the east. During five years since its inception, in 2011, the ATAP has achieved outstanding progress in terms of the numbers of animals and the variety of species tagged. To date, the ATAP has yielded over 2.6 million detections from more than 700 acoustically tagged animals, representing 27 different species from 20 families, including the African penguin Spheniscus demersus, fishery-at-risk species (e.g. dusky kob Argyrosomus japonicus) and iconic elasmobranchs (e.g. white shark Carcharodon carcharias). Following a period of considerable equipment loss in 2014, refinement of the receiver network was required and the deeper receivers at each site were decommissioned without influencing the integrity of the nationwide array. The platform, managed by the South African Institute for Aquatic Biodiversity, ultimately represents a low-cost method of collecting long-term data that currently benefits approximately 25 researchers from 14 organisations. Case studies are presented to expose the opportunities provided by the ATAP, which will undoubtedly yield new discoveries and provide a greater understanding of the movement patterns and migrations of a wide variety of inshore marine and estuary-associated species.     

Relevance of SEM to Long-Term Mechanical Properties of Cemented Paste Backfill

This paper is an attempt to relate the microstructure to long-term mechanical properties of the cemented paste backfill produced from a hard rock mine tailing from North Queensland in Australia bound with flyash-based geopolymer (geopolymer), flyash-blended cement (FBC), and general purpose cement (GPC). A relatively high slump (260 mm) paste backfill mix with 74 wt% solids has been used to prepare cylindrical paste backfill samples with a diameter of 50 mm and a height of 100 mm. The uniaxial compressive strength tests were conducted on all samples after curing for 112 days to obtain their strength, failure strain and Young’s modulus. Fractured samples were examined under scanning electron microscope to understand the failure mechanisms at the microstructural scale. The results show that binders significantly affected the mechanical properties of paste backfills (ANOVA, p < 0.05). The paste backfill bound with geopolymer gave the lowest strength and Young’s modulus, while the paste backfills bounded with FBC and GPC showed comparable higher strength and modulus values. This was attributed to the relatively well-packed paste backfills with less cracks and smaller pore sizes in these paste backfills bound with FBC and GPC binders. In particular, needle-shaped particles, which were originally identified in GPC, highly influenced the mechanical property of paste backfills. These results indicate that fly ash can be used to partially replace the cement as a binder for paste backfills to achieve economic and environmental benefits.