Structural elements of the Makran region, Oman sea and their potential relevance to tsunamigenisis

The character of convergence along the Arabian–Iranian plate boundary changes radically eastward from the Zagros ranges to the Makran region. This appears to be due to collision of continental crust in the west, in contrast to subduction of oceanic crust in the east. The Makran subduction zone with a length of about 900 km display progressively older and highly deformed sedimentary units northward from the coast, together with an increase in elevation of the ranges. North of the Makran ranges are large subsiding basins, flanked to the north by active volcanoes. Based on 2D seismic reflection data obtained in this study, the main structural provinces and elements in the Gulf of Oman include: (i) the structural elements on the northeastern part of the Arabian Plate and, (ii) the Offshore Makran Accretionary Complex. Based on detailed analysis of these data on the northeastern part of the Arabian Plate five structural provinces and elements—the Musendam High, the Musendam Peneplain, the Musendam Slope, the Dibba Zone, and the Abyssal Plain have been identified. Further, the Offshore Makran Accretionary Complex shown is to consist Accretionary Prism and the For-Arc Basin, while the Accretionary Prism has been subdivided into the Accretionary Wedge and the Accreted/Colored Mélange. Lastly, it is important to note that the Makran subduction zone lacks the trench. The identification of these structural elements should help in better understanding the seismicity of the Makran region in general and the subduction zone in particular. The 1945 magnitude 8.1 tsunamigenic earthquake of the Makran and some other historical events are illustrative of the coastal region’s vulnerability to future tsunami in the area, and such data should be of value to the developing Indian Ocean Tsunami Warning System.     

Relationship between DOC photochemistry and mercury redox transformations in temperate lakes and wetlands

We compared diurnal variations in dissolved gaseous mercury (DGM) concentration and in losses of dissolved organic carbon fluorescence (DOCF) in four boreal Canadian Shield lakes, in one beaver pond, and in filtered and unfiltered water from a wetland in Lake St. Pierre, a fluvial lake of the St. Lawrence River. These systems were chosen to represent a spectrum of DOC. We also determined the contribution of UVB, UVA and visible light on DGM photo-induced production in the four lakes. Our results showed a strong relationship between DGM concentrations and light intensity and between DGM production and losses in DOCF, in all study sites. We also observed higher rates of DGM formation and of DOCF bleaching in the presence of UV radiation. Under UVB light, production of DGM was higher in clear lakes than in the humic ones. Inversely, in the UVA range, DGM production tended to be higher in humic lakes. We suggest that DOCF bleaching can be used as a proxy for the rate of formation of reactive species that may alter the redox state of mercury in surface waters. We also have indications that DGM production is more important in clear than in humic waters.     

Geochemical Prospectivity Mapping Through a Feature Extraction–Selection Classification Scheme

Natural Resources Research - Machine learning (ML) schemes can enhance success in geochemical prospectivity mapping. This study has examined the effectiveness of several feature extraction or...     

Impact of the North Atlantic Oscillation on streamflow in Western Iran

The Middle East region, where arid and semi‐arid regions occupy most of the land, is extremely vulnerable to any natural or anthropogenic reductions in available water resources. Much of the observed interannual‐decadal variability in Middle Eastern streamflow is physically linked to a large‐scale atmospheric circulation patterns such as the North Atlantic Oscillation (NAO). In this work, the relationship between the NAO index and the seasonal and annual streamflows in the west of Iran was statistically examined during the last four decades. The correlations were constructed for two scenarios (with and without time lag). The associations between the annual and seasonal streamflows and the simultaneous NAO index were found to be poor and insignificant. The possibility of streamflow forecasting was also explored, and the results of lag correlations revealed that streamflow responses at the NAO signal with two and three seasons delays. The highest Spearman correlation coefficient of 0.379 was found between the spring NAO index and the autumn streamflow series at Taghsimab station, indicating that roughly 14% of the variance in the streamflow series is associated with NAO forcing. Copyright © 2013 John Wiley & Sons, Ltd.     

Monitoring and prediction of land use/land cover changes using CA-Markov model: a case study of Ravansar County in Iran

Human‐induced land use/land cover (LULC) changes are among the most important processes that shape the dynamics of the earth’s surface. This phenomenon, which is occurring at an astonishing rate, and its consequential environmental impacts have become an important area of research for scientists.Therefore, a wide range of methods and models have been developed to detect and predict these alterations, among which cellular automata (CA) models such as the CA‐Markov model, due to their affinity to geographic information system (GIS) and remote sensing (RS), are appropriate for detailed resolution modelling and simulating dynamic spatial processes. In Iran, the district of Ravansar has undergone severe LULC changes recently, thus to take the necessary precautions, decision‐makers need to predict and determine the extent of these changes. In this study, using spatial analysis methods the LULC changes in Ravansar were investigated from 1992 to 2015. Subsequently, the CA‐Markov model was applied to simulate the spatial pattern changes of LULC until 2030. Our results indicated that from 1992 to 2015, this region has witnessed a noticeable increase in the areas of the built‐up and agricultural lands (both aquatic and non‐aquatic), resulting in the decrease of the gardens, range, and bare lands. The simulated LULC map showed that this trend will continue due to more urbanization and development of agricultural areas.     

Numerical ANFIS-Based Formulation for Prediction of the Ultimate Axial Load Bearing Capacity of Piles Through CPT Data

This study explores the potential of adaptive neuro-fuzzy inference systems (ANFIS) for prediction of the ultimate axial load bearing capacity of piles (P_u) using cone penetration test (CPT) data. In this regard, a reliable previously published database composed of 108 datasets was selected to develop ANFIS models. The collected database contains information regarding pile geometry, material, installation, full-scale static pile load test and CPT results for each sample. Reviewing the literature, several common and uncommon variables have been considered for direct or indirect estimation of P_u based on static pile load test, cone penetration test data or other in situ or laboratory testing methods. In present study, the pile shaft and tip area, the average cone tip resistance along the embedded length of the pile, the average cone tip resistance over influence zone and the average sleeve friction along the embedded length of the pile which are obtained from CPT data are considered as independent input variables where the output variable is P_u for the ANFIS model development. Besides, a notable criticism about ANFIS as a prediction tool is that it does not provide practical prediction equations. To tackle this issue, the obtained optimal ANFIS model is represented as a tractable equation which can be used via spread sheet software or hand calculations to provide precise predictions of P_u with the calculated correlation coefficient of 0.96 between predicted and experimental values for all of the data in this study. Considering several criteria, it is represented that the proposed model is able to estimate the output with a high degree of accuracy as compared to those results obtained by some direct CPT-based methods in the literature. Furthermore, in order to assess the capability of the proposed model from geotechnical engineering viewpoints, sensitivity and parametric analyses are done.     

Application of Geochemistry and VNIR Spectroscopy in Mapping Heavy Metal Pollution of Stream Sediments in the Takab Mining Area, NW of Iran

This study considered the possibility of using visible and near infrared (VNIR) spectral absorption feature parameters (SAFPs) in predicting the concentration and mapping the distribution of heavy metals in sediments of the Takab area. In total, 60 sediment samples were collected along main streams draining from the mining districts and tailing sites, in order to measure the concentration of As, Co, V, Cu, Cr, Ni, Hg, Ti, Pb and Zn and the reflectance spectra (350–2500 nm). The quantitative relationship between SAFPs (Depth500nm, R610/500nm, R1344/778nm, Area500nm, Depth2200nm, Area2200nm, Asym2200nm) and geochemical data were assessed using stepwise multiple linear regression (SMLR) and enter multiple linear regression (EMLR) methods. The results showed a strong negative correlation between Ni and Cr with Area2200nm, a significant positive correlation between As and Asym2200nm, Ni and Co with Depth2200nm, as well as Co, V and total values with Depth500nm. The EMLR method eventuated in a significant prediction result for Ni, Cr, Co and As concentrations based on spectral parameters, whereas the prediction for Zn, V and total value was relatively weak. The spatial distribution pattern of geochemical data showed that mining activities, along with the natural weathering of base metal occurrences and rock units, has caused high concentrations of heavy metals in sediments of the Sarough River tributaries.     

Historical tsunami in the Makran Subduction Zone off the southern coasts of Iran and Pakistan and results of numerical modeling

Tsunami hazard in the Makran Subduction Zone (MSZ), off the southern coasts of Iran and Pakistan, was studied by numerical modeling of historical tsunami in this region. Although the MSZ triggered the second deadliest tsunami in the Indian Ocean, among those known, the tsunami hazard in this region has yet to be analyzed in detail. This paper reports the results of a risk analysis using five scenario events based on the historic records, and identifies a seismic gap area in western Makran off the southern coast of Iran. This is a possible site for a future large earthquake and tsunami. In addition, we performed numerical modeling to explain some ambiguities in the historical reports. Based on the modeling results, we conclude that either the extreme run-up of 12–15 m assigned for the 1945 Makran tsunami in the historical record was produced by a submarine landslide triggered by the parent earthquake, or that these reports are exaggerated. The other possibility could be the generation of the huge run-up heights by large displacements on splay faults. The results of run-up modeling reveal that a large earthquake and tsunami in the MSZ is capable of producing considerable run-up heights in the far field. Therefore, it is possible that the MSZ was the source of the tsunami encountered by a Portuguese fleet in Dabhul in 1524.     

Modeling Vapor Migration for Estimating the Time to Reach Steady State Conditions

The design and planning of soil vapor sampling for vapor intrusion assessment require an estimate of the time for vapor migration from the contamination source to reach steady state prior to vapor sampling and analysis for volatile organic compounds (VOCs). This study presents the model derivation, analytical solutions, as well as the assumptions and limitations of a one-dimensional VOC vapor transport model based on diffusion in porous media and equilibrium partitioning of VOCs in solid, aqueous, and vapor phases. The model assumes a finite domain with boundary conditions that represent the scenarios of vapor migration in the real environment. The derivation of the conceptual model is presented along with its practical use and implications as illustrated through case examples. Consideration of the upper (or exit) boundary condition along with the distance between the source and the applicable boundary, rather than the distance from the source to the measurement point, are shown to be critical in the time estimates as compared to an expression typically used and cited in guidance documents. The study reveals the importance of defining a conceptual model and relevant boundaries in assessing near steady state conditions, and suggests a tiered approach in refining the estimate with increasing level of effort for practical applications in vapor assessment.