Comet Hale-Bopp (C/1995 O1): UVSTAR-FUV Spectroscopy from the Space Shuttle

We report here on unique post-perihelion (2.3 AU) measurements of Comet Hale-Bopp in the FUV-range (950–1250 Å) by means of the UVSTAR spectrometer from the space shuttle with the main purpose of searching for argon and other FUV emitters. New methods for separating the strong airglow emission at shuttle altitudes are here discussed in detail. Due to our low resolution (15 Å) and S/N ratio the possible rocket-borne detection of argon near perihelion (0.9 AU) could not be confirmed. New species as N₂ are suspected but difficult to separate from the strong airglow emission at shuttle altitudes. From the Lyα brightness (1.30± 0.08 kRy) a water production rate Q = 5.9 ± 0.4 × 10²⁹ molecules s^?1 could be derived and compared with other post-perihelion observations.     

Trace-element contents and cathodoluminescence of “trapiche” rubies from Mong Hsu, Myanmar (Burma): geological significance

Summary ?Mong Hsu rubies of the “trapiche” type are sporadically seen in the gem market. However, they have never been described in the field. The study of the nature of solid inclusions, the variation of trace-element contents, as well as the cathodoluminescence behaviour of six “trapiche” rubies permit the conclusion that these rubies crystallised in the same geological environment (marble-type deposit) as the normal rubies from Mong Hsu: (1) Cr and V are the main chromophorous elements in both ruby types; they act, together with Ti, as activators or quenchers for cathodoluminescence; (2) calcite, dolomite, rutile, mica, diaspore, apatite, chlorite, and feldspar are solid inclusions found in both ruby types; (3) the presence of bastn?site in trapiche ruby and fluorite in non-trapiche ruby indicates the circulation of F-bearing fluids during ruby deposition; (4) the distribution of trace-element contents in the crystal is similar for both ruby types. In the Cr₂O₃ vs. Fe₂O₃ and Cr₂O₃ vs. Fe₂O₃/TiO₂ diagrams, the population fields of Mong Hsu “trapiche” and non-“trapiche” rubies overlap. They are distinct from those of rubies and sapphires hosted in basalts from South-east Asia. Received October 30, 2001; revised version accepted March 25, 2002     

THE EUROPEAN MACROSEISMIC SCALE (MSK-92)

A new updated version of the MSK macroseismic intensity scale has been prepared by a Working Group of the European Seismological Commission and has been published in April 1993 (European Macroseismic Scale 1992: updated MSK scale, 1993, ed. by G. Grünthal, Cahiers du Centre Européen de Geodynamique et de Séismologie, no. 7).     

A seismic source zone model for the seismic hazard assessment of the Italian territory

We designed a new seismic source model for Italy to be used as an input for country-wide probabilistic seismic hazard assessment (PSHA) in the frame of the compilation of a new national reference map.

We started off by reviewing existing models available for Italy and for other European countries, then discussed the main open issues in the current practice of seismogenic zoning.

The new model, termed ZS9, is largely based on data collected in the past 10 years, including historical earthquakes and instrumental seismicity, active faults and their seismogenic potential, and seismotectonic evidence from recent earthquakes. This information allowed us to propose new interpretations for poorly understood areas where the new data are in conflict with assumptions made in designing the previous and widely used model ZS4.

ZS9 is made out of 36 zones where earthquakes with M_w > = 5 are expected. It also assumes that earthquakes with M_w up to 5 may occur anywhere outside the seismogenic zones, although the associated probability is rather low. Special care was taken to ensure that each zone sampled a large enough number of earthquakes so that we could compute reliable earthquake production rates.

Although it was drawn following criteria that are standard practice in PSHA, ZS9 is also innovative in that every zone is characterised also by its mean seismogenic depth (the depth of the crustal volume that will presumably release future earthquakes) and predominant focal mechanism (their most likely rupture mechanism). These properties were determined using instrumental data, and only in a limited number of cases we resorted to geologic constraints and expert judgment to cope with lack of data or conflicting indications. These attributes allow ZS9 to be used with more accurate regionalized depth-dependent attenuation relations, and are ultimately expected to increase significantly the reliability of seismic hazard estimates.     

Electrical resistivity structure of the eastern Moroccan Atlas System and its Tectonic implications

The electrical resistivity structure of the crust and upper mantle of the Atlas Mountain System was studied using magnetotelluric and geomagnetic deep soundings. Field experiments were done in eastern Morocco along a traverse from the Anti Atlas to the Rides Rifaines in two campaigns in 1983 and 1988.Zones of very low electrical resistivity could be identified in the various structural settings at different depth ranges, most likely connected directly to the tectonic evolution of the mountain belts. A mid-crustal low resistivity layer with total conductance (thickness-resistivity ratio) of about 2000 Siemens stretches from the southern border of the High Atlas towards the Middle Atlas. This layer seems to characterize the base of crustal detachment, e.g., the plane for large horizontal overthrusting, and supports the idea of thick- and thin-skinned tectonics involved in Atlasic mountain building. In the western Middle Atlas an upper-crustal low resistivity layer (at depth < 10 km) was found in the area where volcanic activity was present, pointing towards a direct relation between low electrical resistivity and volcanic or postvolcanic events. North of the Middle Atlas resistivity structures change totally: The Pre and parts of the Sub-Rif have a highly conductive cover, presumably connected to the molasse basin. Total conductance was calculated to reach 6000 Siemens. No further conductive structures, like, e.g., the ones found beneath the High and Middle Atlas, are seen within the resistive crust, but at much greater depth within the upper mantle.

---

Zusammenfassung Im marokkanischen Atlas-System wurde der elektrische Widerstand der Kruste und des oberen Mantels mit magnetotellurischen und erdmagnetischen Tiefen-Sondierungen erkundet. Die Feldmessungen wurden in den Jahren 1983 und 1988 im östlichen Marokko entlang einer Traverse vom Anti Atlas bis in das Rif durchgeführt.In den einzelnen strukturellen Einheiten wurden in unterschiedlichen Krustentiefen Schichten sehr kleiner elektrischer Widerstände entdeckt, die direkt mit der tektonischen Entwicklung des Atlasgebirges verknüpft zu sein scheinen. Zwischen dem Südrand des Hohen Atlas und dem Mittleren Atlas im Norden erstreckt sich eine Zone sehr kleiner Widerstände (integrierte Leitfähigkeit etwa 2000 Siemens) in mittleren Krustentiefen. Diese Schicht scheint einen Bereich krustaler Ablösung zu kennzeichnen und kann als Basis einer weitspannigen Überschiebung angenommen werden. Diese Form der »thick- & thin-skinned« Tektonik scheint wesentlich am Prozess der Gebirgsbildung im Atlas beteiligt zu sein. Im westlichen Mittleren Atlas, im Bereich des jungen Vulkanismus, wurde eine gutleitende Zone in der oberen Kruste (Tiefe < 10 km) gefunden. Diese Beobachtung legt einen direkten Zusammenhang zwischen erhöhter elektrischer Leitfähigkeit und vulkanischen bzw. postvulkanischen Ereignissen nahe. Nördlich des Mittleren Atlas ändern sich die Widerstandsstrukturen sehr stark: Im Prä- und teilweise auch noch im Sub-Rif liegt eine sehr gut leitende Deckschicht (integrierte Leitfähigkeit etwa 6000 Siemens) über einem hochohmigen Basement. In der Kruste des Rif werden keine weiteren, tieferliegenden Schichten erhöhter Leitfähigkeit gefunden, wie sie z.B. unter dem Hohen Atlas vorliegen. Dagegen gibt es Hinweise auf Zonen hoher Leitfähigkeit im oberen Mantel.

---

Résumé Dans l'Atlas marocain la résistivité électrique de la croûte et du manteau supérieur a été étudiée à l'aide des sondages magnétotelluriques et géomagnétiques. Ces travaux ont été effectués le long d'une traverse menant de l'Anti-Atlas jusqu'au Rif durant les années 1983 et 1988.Dans différentes profondeurs de la croûte terrestre des zones de résistances électriques très basses ont pu être découvertes ce qui peut être attribué à l'évolution tectonique de l'Atlas. Une couche de résistances très basses (conductance vers 2000 Siemens) s'étend entre le bord au sud du Haut Atlas et l'Atlas Moyen au nord. Cette couche peut être le signe d'un détachement de l'écorce et d'une poussée très vaste. Cette forme tectonique »thick- & thin-skinned« semble être essentiellement responsable du processus de la formation orogénique de l'Atlas. Une zone de bonne conductance se trouve dans la croûte terrestre supérieure (profondeur < 10 km) dans l'ouest de l'Atlas Moyen aux environs de l'activité volcanique caractérisant une relation directe entre une haute conductance électrique et des événements volcaniques et post-volcaniques. Vers le nord de l'Atlas Moyen les structures de résistance subissent un changement total: Au Pré- et partiellement aussi au Subrif se trouve une bonne couche guide (conductance vers 6000 Siemens). Aucune autre couche de conductance supérieure — comme au-dessous du Haut Atlas — n'a été découverte dans la croûte du Rif. On en décèle, par contre, dans le manteau supérieur.

---

1983 1988 - . , , , . ( 2000 Si). , , . , »thick- & -thin-skinned«, , . , ( 10 ) . , - . : - , , - , : 6000 Si. . .

     

Water vapor adsorption by sodium montmorillonite at −5°C

A large amount of interest has recently been expressed pertaining to the quantity of physically adsorbed water by the Martian regolith. Thermodynamic calculations based on experimentally determined adsorption and desorption isotherms and extrapolated to subzero temperatures indicate that physical adsorption of more than one or two monomolecular layers is highly unlikely under Martian conditions. Any additional water would find ice to be the state of lowest energy and therefore the most stable form. To test the validity of the thermodynamic calculations we have measured adsorption and desorption isotherms of sodium montmorillonite at ?5°C. To a first approximation it was found to be valid.     

Comparative Seismic Risk Studies for German Earthquake Regions on the Basis of the European Macroseismic Scale EMS-98

Within the framework of recent research projects, basic tools for GIS-based seismic risk assessment technologies were developed and applied to the building stock and regional particularities of German earthquake regions. Two study areas are investigated, being comparable by the level of seismic hazard and the hazard-consistent scenario events (related to mean return periods of 475, 2475 and 10000 years). Significant differences exist with respect to the number of inhabitants, the grade and extent of urbanisation, the quality and quantity of building inventory: the case study of Schmölln in Eastern Thuringia seems to be representative for the majority of smaller towns in Germany, the case study of Cologne (Köln) stands for larger cities. Due to the similarities of hazard and scenario intensities, the considerable differences do not only require proper decisions concerning the appropriate methods and acceptable efforts, they enable conclusions about future research strategies and needs for disaster reduction management. Not least important, results can sharpen the focus of public interest. Seismic risk maps are prepared for different scenario intensities recognising the scatter and uncertainties of site-dependent ground motion and also of the applied vulnerability functions. The paper illustrates the impact of model assumptions and the step-wise refinements of input variables like site conditions, building stock or vulnerability functions on the distribution of expected building damage within the study areas. Furthermore, and in contrast to common research strategies, results support the conclusion that in the case of stronger earthquakes the damage will be of higher concentration within smaller cities like Schmölln due to the site-amplification potential and/or the increased vulnerability of the building stock. The extent of damage will be pronounced by the large number of masonry buildings for which lower vulnerability classes have to be assigned. Due to the effect of deep sedimentary layers and the composition of building types, the urban centre of Cologne will be less affected by an earthquake of comparable intensity.     

Organizational Dynamics of the U.S. Logistics Industry: An Economic Geography Perspective*

Although the logistics industry provides critical services to all sectors of the economy, few studies exist in economic geography that examine and explain the organizational dynamics of this industry. This article highlights the significance of the logistics industry in contemporary industrialization and argues that an enriched understanding of the interaction between technology and space can be achieved by examining the evolution of an industry that plays a central role in the contemporary economy. We focus on dimensions that are identified as particularly important: organizational, geographic, and risk and security.