INDUSTRIAL HERITAGE AND PLACE IDENTITY IN SPAIN: FROM MONUMENTS TO LANDSCAPES*

In Spain, the birth of interest in the nation's industrial heritage dates from the 1980s and occurred alongside the process of deindustrialization. Policies concerning derelict industrial sites have shifted gradually from destruction to preservation, rehabilitation, and enhancement, and industrial heritage enhancement projects are now widespread in the country. However, a clear mismatching has arisen between institutional and academic initiatives and local communities, which exhibit widespread disinterest in or even rejection of industrial remains. This problematic situation can be related to the utilization of industrial heritage as an economic resource without paying much attention to its connections with memory and identity. Also, the mismatching is due to a positivist approach to industrial heritage whereby the monument and the museum are prioritized. We argue that projects which consider industrial remains as part of cultural landscapes might shorten the gap between the institutional and economic side of industrial heritage and its identity‐building and popular facets.     

Ibiza Absolute Calibration Experiment: Survey and Preliminary Results

Within the framework of a project comprising part of the Spanish Space Program related to the JASON-1 CNES (Centre National d'Etudes Spatiales)/NASA (National Aeronautics and Space Administration) mission, a campaign was conducted from June 9–17, 2003, on the Absolute Calibration Site of the island of Ibiza. The objective was to determine the local marine geoid slope under the ascending (187) and descending (248) Jason-1 ground tracks, in order to allow a better extrapolation of the open-ocean altimetric data with on-shore tide gauge locations, and thereby improve the overall precision of the calibration process. For this we have used a catamaran with two GPS antennas onboard, following the Corsica/Senetosa design (Bonnefond et al. 2003a Bonnefond, P., Exertier, P., Laurain, O., Menard, Y., Orsoni, A., Jeansou, E., Haines, B., Kubitschek, D. and Born, G. 2003a. Leveling Sea Surface using a GPS catamaran. Marine Geodesy, 26(3–4): 319–334. [Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]). Five GPS reference stations were deployed in order to reduce the distance between the areas covered by the catamaran and the fixed GPS receiver used in the kinematic process. The geodetic activities (e.g., GPS, leveling) have enabled the building of a very accurate (few mm) network in a reference frame compatible with the satellite altimetry missions (ITRF 2000). The GPS kinematic data were processed using two different software programmes, allowing checking of the consistency of the solutions. If the standard deviation of the differences (3.3 cm) is close to the kinematic process precision, they exhibit some large values (up to 14 cm). These large discrepancies have been reduced using a weighting based on the crossover differences. Inasmuch as the distances between the tide gauges and the areas covered by the GPS catamaran were becoming large, we have used the MOG2D ocean model (Carrère and Lyard 2003 Carrère, L. and Lyard, F. 2003. Modelling the barotropic response of the global ocean to atmospheric wind and pressure forcing—comparisons with observations. Geophys. Res. Letters, 30(6) [Google Scholar]) to correct the sea surface from tides. In the farthest areas, the crossover differences show an improvement by a factor of two. Finally, we also present preliminary results on Jason-1 altimeter calibration using the derived marine geoid. From this analysis, the altimeter bias is estimated to be 120 ± 5 mm. The quality of this first result validates the whole GPS-based marine geoid processing, for which the accuracy is estimated to be better than 3 cm rms at crossovers.     

Rare earth elements and yttrium in ferromanganese deposits from the South China Sea: distribution, composition and resource considerations

Ferromanganese nodules and crusts contain relatively high concentration of rare earth elements(REE) and yttrium(REY),with a growing interest in exploitation as an alternative to land-based REY resources.On the basis of comprehensive geochemical approach,the abundance and distribution of REY in the ferromanganese nodules from the South China Sea are analyzed.The results indicate that the REY contents in ferromanganese deposits show a clear geographic regularity.Total REY contents range from 69.1×10~(–6) to 2 919.4×10~(–6),with an average value of 1 459.5×10~(–6).Especially,the enrichment rate of Ce content is high,accounting for almost 60% of the total REY.This REE enrichment is controlled mainly by the sorption of ferromanganese oxides and clay minerals in the nodules and crusts.Moreover,the total REY are higher in ferromanganese deposits of hydrogenous origin than of diagenetic origin.Finally,Light REE(LREE) and heavy REE(HREE) oxides of the ferromanganese deposits in the study area can be classified into four grades: non-enriched type,weakly enriched type,enriched type,and extremely enriched type.According to the classification criteria of rare earth resources,the Xisha and Zhongsha platform-central deep basin areas show a great potential for these rare earth metals.     

Exposure age dating and Equilibrium Line Altitude reconstruction of an Egesen moraine in the Maritime Alps, Italy

Four boulder samples from the Piano del Praiet frontal moraine in the Gesso della Barra Valley (Maritime Alps) have been ¹⁰Be dated. The results give a weighted mean age of 11 340±370 (870) yr, constraining the frontal moraine to the Egesen glacial stadial, during the Younger Dryas cold phase. By applying the same ¹⁰Be production rate to other Egesen moraines previously dated in the Alps, we obtain similar ages for all of them. This suggests a synchroneity of the Egesen deglaciation in the European Alps at the end of the Younger Dryas. From the palaeoshape of the Egesen glacier, reconstructed by means of geomorphological mapping, an Equilibrium Line Altitude depression (δELA) of −520 to −530 m, with respect to the present-day ELA, and of −260 to −320 m, with respect to the Little Ice Age ELA, has been calculated. Comparison with other Alpine sector δELAs indicates that the Maritime Alps experienced humid climatic conditions during the Younger Dryas.     

Flow Behavior of Clay-Silt to Sand-Silt Water-Rich Suspensions at Low to High Shear Rates: Implications for Slurries, Transitional Flows, and Submarine Debris-Flows

Water-rich clay to sand suspensions show a shear rate dependent flow behavior and knowledge of the appropriate rheological model is relevant for sedimentological, industrial and hydraulic studies. We present experimental rheological measurements of water-rich (40 to 60 wt%) clay to silt (population A) and silt to sand (population B) suspensions mixed in different proportions. The data evidence a shear rate dependent shear thinning-shear thickening transition. At lower shear rates, the suspensions organize in chains of particles, whereas at higher shear rates, these chains disrupt so increasing the viscosity. The viscosity, consistency and yield stress decrease as the A+B fraction decreases as the content of B particles increases. This behavior reflects the competing effects of the lubrication and frictional processes as a function of particle size and water content. Transitional flows form by the incorporation of small amounts of the finer fraction while ‘oceanic floods’ form at the estuary of rivers and the submarine debris-flows increase their velocity by incorporating water. The critical Reynolds number of the studied suspensions is ~2000±100 suggesting that the grainsize plays a major role in the laminar to turbulent transition. Our results have implications for the modeling of sediment flows and the hazard related to floods.     

A sedimentary facies model for stepped,fluvial tufa systems in the Iberian Range (Spain): the Quaternary Piedra and Mesa valleys

Stratigraphic and sedimentological analyses of the Quaternary tufa and associated deposits in the Piedra and Mesa river valleys allowed a number of stages of their sedimentary evolution to be characterized, and a depositional sedimentary model for this north‐central sector of the Iberian Range (Spain) to be established. The proposed sedimentary facies model may explain tufa arrangements in other medium to high gradient, stepped, fluvial tufa systems with narrow transverse profiles occurring in temperate, semi‐arid areas, in both recent and past scenarios. There are several tufa deposits within the Piedra and Mesa river valleys that, over a maximum thickness of about 90 m, record one or more stages of tufa deposition produced following the fluvial incision of the bedrock or previous tufa deposits. Each depositional stage begins with coarse detrital sedimentation. Six fundamental, vertical sequences of tufa facies with small amounts of detrital material reveal the sedimentary processes that occurred in different fluvial environments: channel areas with: (i) free‐flowing water; (ii) barrages and/or cascades; and (iii) dammed water and palustrine floodplains. The proposed sedimentary model involves narrow, stepped, fluvial valleys in which tufa cascades were common. Alternating intervals of bryophyte and stromatolite facies commonly formed at some cascades. Many of these represented barrage‐cascade structures that consisted of phytoclast rudstones, thick phytoherms of mosses and associated stromatolites, and curtain‐shaped phytoherms of stems. Upstream of these structures, dammed areas with bioclastic sands and silts developed and palustrine vegetation grew. The channel stretches between barrages and/or cascades were loci for extensive stromatolite growth in fast flowing water. The palustrine floodplain was home to pools and drainage channels. The model also explains the growth of some barrages in the River Piedra that surpassed the height of the divide, with the diffluence of the main channel into a secondary course forming other tufa deposits in the area. The distribution and abundance of certain types of tufa facies in fluvial basins may be an indicator of differences in their gradients. The facies studied in this work suggest that the gradient of the ancient River Piedra was steeper than that of the ancient River Mesa. Assuming similar scenarios for climate and hydrology, the depositional settings mentioned above and their dimensions would have been determined mainly by the gradient and width of the associated river valleys. This sedimentary model may also be useful for inferring variations in other river basin slopes, as well as accounting for the presence of tufas in areas that normally have no permanent water input.     

Styles of ice-marginal deformation at Hagafellsjökull-Eystri, Iceland during the 1998/99 winter-spring surge

This paper describes the internal architecture of a push moraine formed by a winter-spring surge of Hagafellsjökull-Eystri (Iceland) in 1998/99. The sedimentary architecture of this push moraine consists of a multilayered slab of glaciofluvial sediments with a monoclinal structure that has been displaced laterally by the advancing ice margin. The crest and ice-distal face of the moraine consist of subhorizontal sediment sheets, while the ice-proximal face dips steeply (45° to 90°) towards the ice margin. The core of the moraine consists of frozen sediment and thin slabs of glacier ice are embedded in its proximal face. The sediment slabs are characterized by both brittle and ductile styles of deformation. We argue that the observed variation in deformation style is dependent on whether the glacial foreland was frozen or unfrozen at the time of displacement. Frozen foreland would behave in a brittle fashion, while unfrozen foreland is likely to have deformed in a more ductile manner. The associated spatial variations in the degree of foreland freezing could be explained by variation in ice-marginal snow cover. We conclude that the thermal regime of the foreland, and the timing of the ice advance, is of importance to the style of internal deformation found within ice-marginal push moraines.     

Review of the El Soplao Amber Outcrop,Early Cretaceous of Cantabria,Spain

<正>El Soplao outcrop,an Early Cretaceous amber deposit recently discovered in northern Spain (Cantabria),has been shown to be the largest site of amber with arthropod inclusions that has been found in Spain so far.Relevant data provided herein for biogeochemistry of the amber,palynology,taphonomy and arthropod bioinclusions complement those previously published.This set of data suggests at least two botanical sources for the amber of El Soplao deposit.The first(type A amber)strongly supports a source related to Cheirolepidiaceae,and the second(type B amber)shows non-specific conifer biomarkers.Comparison of molecular composition of type A amber with Frenelopsis leaves(Cheirolepidiaceae)strongly suggests a biochemical affinity and a common botanical origin.A preliminary palynological study indicates a regional high taxonomical diversity,mainly of pteridophyte spores and gymnosperm pollen grains.According to the preliminary palynological data,the region was inhabited by conifer forests adapted to a dry season under a subtropical climate.The abundant charcoalified wood associated with the amber in the same beds is evidence of paleofires that most likely promoted both the resin production and an intensive erosion of the litter,and subsequent great accumulation of amber plus plant cuticles.In addition,for the first time in the fossil record, charcoalified plant fibers as bioinclusions in amber are reported.Other relevant taphonomic data are the exceptional presence of serpulids and bryozoans on the surfaces of some amber pieces indicating both a long exposure on marine or brackish-water and a mixed assemblage of amber.Lastly,new findings of insect bioinclusions,some of them uncommon in the fossil record or showing remarkable adaptations,are reported.In conclusion,a documented scenario for the origin of the El Soplao amber outcrop is provided.