Exhumation Paths of High-Pressure-Low-Temperature Metamorphic Rocks from the Lycian Nappes and the Menderes Massif (SW Turkey): a Multi-Equilibrium Approach

The Menderes Massif and the overlying Lycian Nappes occupy anextensive area of SW Turkey where high-pressure–low-temperaturemetamorphic rocks occur. Precise retrograde P–T pathsreflecting the tectonic mechanisms responsible for the exhumationof these high-pressure–low-temperature rocks can be constrainedwith multi-equilibrium P–T estimates relying on localequilibria. Whereas a simple isothermal decompression is documentedfor the exhumation of high-pressure parageneses from the southernMenderes Massif, various P–T paths are observed in theoverlying Karaova Formation of the Lycian Nappes. In the uppermostlevels of this unit, far from the contact with the MenderesMassif, all P–T estimates depict cooling decompressionpaths. These high-pressure cooling paths are associated withtop-to-the-NNE movements related to the Akçakaya shearzone, located at the top of the Karaova Formation. This zoneof strain localization is a local intra-nappe contact that wasactive in the early stages of exhumation of the high-pressurerocks. In contrast, at the base of the Karaova Formation, alongthe contact with the Menderes Massif, P–T calculationsshow decompressional heating exhumation paths. These paths areassociated with severe deformation characterized by top-to-the-eastshearing related to a major shear zone (the Gerit shear zone)that reflects late exhumation of high-pressure parageneses underwarmer conditions. KEY WORDS: exhumation; high-pressure–low-temperature metamorphism; multi-equilibrium P–T estimates; Lycian Nappes; Menderes Massif     

Paleozoic Accretion-Collision Events and Kinematics of Ductile Deformation in the Eastern Part of the Southern-Central Tianshan Belt, China

The Tianshan range could have been built by both late Early Paleozoic accretion and Late Paleozoic collision events. The late Early Paleozoic Aqqikkudug-Weiya suture is marked by Ordovician ophiolitic melange and a Silurian flysch sequence, high-pressure metamorphic relics, and mylonitized rocks. The Central Tianshan belt could principally be an Ordovician volcanic arc; whereas the South Tianshan belt, a back-arc basin. Macro- and microstructures, along with unconformities, provide some kinematic and chronological constraints on 2-phase ductile deformation. The earlier ductile deformation occurring at ca. 400 Ma was marked by north-verging ductile shearing, yielding granulite-bearing ophiolitic melange blocks and garnet-pyroxene-facies ductile deformation, and the later deformation, a dextral strike-slip tectonic process, occurred during the Late Carboniferous-Early Permian. Early Carboniferous molasses were deposited unconformably on pre-Carboniferous metamorphic and ductilely sheared rocks, implying t     

The biogenic origin of needle fibre calcite

Needle fibre calcite is one of the most ubiquitous habits of calcite in vadose environments (caves deposits, soil pores, etc.). Its origin, either through inorganic, indirect or direct biological processes, has long been debated. In this study, investigations at 11 sites in Europe, Africa and Central America support arguments for its biogenic origin. The wide range of needle morphologies is the result of a gradual evolution of the simplest type, a rod. This rod is the elementary brick which, by aggregation and welding, builds more complex needles. The absence of cross‐welded needles implies that they are welded in a mould, or under a longitudinal and unidirectional constraint, before being released inside the soil pores. The difference between the lengthening of the needles and the c axis can be explained by the existence of needles observed under a scanning electron microscope in organic sleeves, which can act as a mould during rod growth. Complex morphologies with epitaxial outgrowths on straight rods cannot have grown entirely inside organic microtubes; they must result from soil diagenesis after the release of straight rods in a soil‐free medium. Whisker crystals are interpreted as the result of growth and coalescence of euhedral crystals on a rod. Rhomb chains are considered to be the consequence of successive epitaxial growth steps on a needle during variations in growth conditions. Isotopic signatures for needle fibre calcite vary from ?16·63‰ to +1·10‰ and from ?8·63‰ to ?2·25‰ for δ¹³C and δ¹⁸O, respectively. The absence of high δ¹⁸O values for needle fibre calcite precludes a purely physicochemical origin (evaporative) for this particular habit of calcite. As epitaxial growth cannot precipitate in the same conditions as initial needles, needle fibre calcite stable isotopic signatures should be used with caution as a proxy for palaeoenvironmental reconstructions. In addition, it is suggested that the term needle fibre calcite should be kept for the original biogenic form. The other habit should be referred to as epitaxial forms of needle fibre calcite.     

Mean Kinematic Characteristics of Synoptic Easterly Disturbances over the Atlantic

This study investigates the mean kinematic characteristics of the tropical Atlantic easterly disturbances in January-March(JFM),April-June(AMJ),July-September(JAS)and October-December(OND)from 1968-1998.For each season,the preferential tracks of these disturbances in the 3-10-day band periods were computed and spatialized,as well as their associated wavelength,velocity and main period,which lies between 3-5 days and between 6-9 days depending on the track and the season. Two main tracks are highlighted over the Atlantic Ocean.During OND and JFM these two tracks are well separated and located in each hemisphere around 15°S and 12.5°N.From AMJ to JAS these tracks migrate northward;in JAS,they merge into one over the northern tropical Atlantic along 17.5°N.The associated wavelength fields exhibit a meridional gradient,with large wavelengths(greater than 4000 km) around the equator,between 5°N and 5°S,and smaller wavelengths outside of this latitude band(between 2500-3500 km).The phase speed is also found to exhibit poleward decreasing values from 12-6 m s-1. Over the north Atlantic track,6-9-day disturbances were found to occur from January to May and approximately from October to December.From June to September,the 3-5-day waves dominate the synoptic activity.Over the south Atlantic track,between May and August the synoptic variability is mainly explained by the 3-5-day disturbances but from January to April and from September to December both 3-5-day waves and 6-9-day waves can occur.     

Regional Saharan dust modelling during the SAMUM 2006 campaign

The regional dust model system LM-MUSCAT-DES was developed in the framework of the SAMUM project. Using the unique comprehensive data set of near-source dust properties during the 2006 SAMUM field campaign, the performance of the model system is evaluated for two time periods in May and June 2006. Dust optical thicknesses, number size distributions and the position of the maximum dust extinction in the vertical profiles agree well with the observations. However, the spatio-temporal evolution of the dust plumes is not always reproduced due to inaccuracies in the dust source placement by the model. While simulated winds and dust distributions are well matched for dust events caused by dry synoptic-scale dynamics, they are often misrepresented when dust emissions are caused by moist convection or influenced by small-scale topography that is not resolved by the model. In contrast to long-range dust transport, in the vicinity of source regions the model performance strongly depends on the correct prediction of the exact location of sources. Insufficiently resolved vertical grid spacing causes the absence of inversions in the model vertical profiles and likely explains the absence of the observed sharply defined dust layers.     

Use of regionalized stormflow coefficients with a view to hydroclimatological hazard mapping

Abstract

An attempt was made to compensate for the lack of long hydrological time series and the lack of information on maximum streamflow in the Alzette River basin (Luxembourg) via the regionalization of stormflow coefficients. Streamflow data recorded since 1995 with a very dense streamgauge network allowed the determination of maximum stormflow coefficients in 18 sub-basins of the Alzette. The stormflow coefficients were then regionalized via stepwise multiple regression analysis for 83 different sub-basins of the Alzette. Combined with 10-year daily rainfall heights (statistical estimation), this regionalization allowed the spatial variability of storm runoff in the Alzette basin to be mapped, thus providing a view of hazard and risk-producing areas, as well as of risk-exposed areas. In a basin with little historical hydrological information this technique can help identify areas where storm runoff reducing measures should be applied from the outset.     

Ensemble Optimal Interpolation: multivariate properties in the Gulf of Mexico

High-resolution models can reproduce mesoscale dynamics and the variability in the Gulf of Mexico (GOM), but cannot provide accurate locations of currents without data assimilation (DA). We use the computationally cheap Ensemble Optimal Interpolation (EnOI) in conjunction with the Hybrid Coordinate Ocean Model (HYCOM) model for assimilating altimetry data. The covariance matrix extracted from a historical ensemble, is three-dimensional and multivariate. This study shows that the multivariate correlations with sea level anomaly are coherent with the known dynamics of the area at two locations: the central part of the GOM and the upper slope of the northern shelf. The correlations in the first location are suitable for an eddy forecasting system, but the correlations in the second location show some limitations due to seasonal variability. The multivariate relationships between variables are reasonably linear, as assumed by the EnOI. Our DA set-up produces little noise that is dampened within 2 d, when the model is pulled strongly towards observations. Part of it is caused by density perturbations in the isopycnal layers, or artificial caballing. The DA system is demonstrated for a realistic case of Loop Current eddy shedding, namely Eddy Yankee.     

Asynchronous data assimilation with the EnKF

This study revisits the problem of assimilation of asynchronous observations, or four-dimensional data assimilation, with the ensemble Kalman filter (EnKF). We show that for a system with perfect model and linear dynamics the ensemble Kalman smoother (EnKS) provides a simple and efficient solution for the problem: one just needs to use the ensemble observations (that is, the forecast observations for each ensemble member) from the time of observation during the update, for each assimilated observation. This recipe can be used for assimilating both past and future data; in the context of assimilating generic asynchronous observations we refer to it as the asynchronous EnKF. The asynchronous EnKF is essentially equivalent to the four-dimensional variational data assimilation (4D-Var). It requires only one forward integration of the system to obtain and store the data necessary for the analysis, and therefore is feasible for large-scale applications. Unlike 4D-Var, the asynchronous EnKF requires no tangent linear or adjoint model.