Quaternary depositional patterns and sea-level fluctuations, northeastern North Carolina

A detailed record of late Quaternary sea-level oscillations is preserved within the upper 45 m of deposits along an eight km transect across Croatan Sound, a drowned tributary of the Roanoke/Albemarle drainage system, northeastern North Carolina. Drill-hole and seismic data reveal nine relatively complete sequences filling an antecedent valley comprised of discontinuous middle and early Pleistocene deposits. On interfluves, lithologically similar marine deposits of different sequences occur stacked in vertical succession and separated by ravinement surfaces. Within the paleo-drainage, marine deposits are separated by fluvial and/or estuarine sediments deposited during periods of lowered sea level. Foraminiferal and molluscan fossil assemblages indicate that marine facies were deposited in a shallow-marine embayment with open connection to shelf waters. Each sequence modifies or truncates portions of the preceding sequence or sequences. Sequence boundaries are the product of a combination of fluvial, estuarine, and marine erosional processes. Stratigraphic and age analyses constrain the ages of sequences to late Marine Isotope Stage (MIS) 6 and younger (∼ 140 ka to present), indicating multiple sea-level oscillations during this interval. Elevations of highstand deposits associated with late MIS 5 and MIS 3 imply that sea level was either similar to present during those times, or that the region may have been influenced by glacio-isostatic uplift and subsidence.     

High-Nb hawaiite–mugearite and high-Mg calc-alkaline lavas from northeastern Iran: Oligo-Miocene melts from modified mantle wedge

Tertiary volcanic rocks in northwestern Firoozeh, Iran (the Meshkan triangular structural unit), constitute vast outcrops (up to 250 km²) of high-Mg basaltic andesites to dacites that are associated with high-Nb hawaiites and mugearites. Whole-rock ⁴⁰Ar/³⁹Ar ages show a restricted range of 24.1 ± 0.4–22.9 ± 0.5 Ma for the volcanic rocks. The initial ratios of ⁸⁷Sr/⁸⁶Sr and ¹⁴³Nd/¹⁴⁴Nd vary from 0.703800 to 0.704256 and 0.512681 to 0.512877, respectively, in the high-Mg basaltic andesites–dacites. High-Th contents (up to 11 ppm) and Sr/Y values (27–100) and the isotopic composition of the subalkaline high-Mg basaltic andesites–dacites indicate derivation from a mantle modified by slab and sediment partial melts. Evidence such as reverse zoning and resorbed textures and high Ni and Cr contents in the evolved samples indicate that magma mixing with mafic melts and concurrent fractional crystallization lead to the compositional evolution of this series. The high-Nb hawaiites and mugearites, by contrast, have a sodic alkaline affinity and are silica undersaturated; they are also enriched in Nb (up to 47 ppm) and a wide range of incompatible trace elements, including LILE, LREE, and HFSE. Geochemistry and Sr–Nd isotopic compositions of the high-Nb hawaiites and mugearites suggest derivation from a mantle source affected by lower degrees of slab melts. Post-orogenic slab break-off is suggested to have prompted the asthenospheric upwelling that triggered partial melting in mantle metasomatized by slab-derived melts.     

Electron spin resonance optical dating of marine,estuarine, and aeolian sediments in Florida,USA

For the first time, electron spin resonance optical dating (ESROD) has been conducted on littorally transported and aeolian siliciclastic sediments in Florida. ESROD utilizes light-sensitive radiation-sensitive defects at silicon sites that have been replaced by aluminum and titanium atoms to give rise to a time-dependant signal. These defects saturate at higher levels of radiation dose, compared to optically stimulated luminescence, and therefore extend the optical dating range back into the millions of years. Our results show that the Trail Ridge Sequence is a multi-depositional unit that began deposition around 2.2 Ma and continued until 6 ka. The Osceola Cape, of the Effingham Sequence, was deposited around 1.5 Ma, and the Chatham Sequence was a multi-depositional terrace with at least three events preserved.     

The Richter earthquake magnitude scale in South Australia

Richter magnitudes M_L have been determined for 718 well recorded South Australian earthquakes by converting amplitudes derived from existing seismograph stations to equivalent Wood‐Anderson amplitudes, and substituting in Richter's formula (Richter 1935), derived for such instruments and for Southern California. The magnitudes so determined were generally found to increase with distance A for each earthquake, at least for events at distances below a few hundred kilometres, reflecting lower attenuation of crustal S waves in South Australia.

A distance‐dependent correction, which must be subtracted from Richter magnitudes, was obtained by integrating the weighted least squares fit to the (A, dM_L/dA) data. The correction increases to one‐half of a magnitude unit at a distance of 400 km, and thereafter decreases smoothly to 0.3 units at 600 km. Station corrections, due to local geological variations, have also been determined. Values range from ‐0.6 to + 0.2 units.

Empirical relationships between the revised M_L scale and the previously used local magnitude scales m_L and M_N (White 1968; Stewart 1975) and the body wave magnitude scale m_b have been established. The latter yields results consistent with the well known Gutenberg‐Richter formula (Richter 1958)     

Monitoring thermal field,humidity field and energy balance over heterogeneous surfaces in the typical valley-city

Journal of Geographical Sciences - Land use and land cover (LULC) alteration has changed original energy balance and heat fluxes between land and atmosphere, and thus affects the structure...     

Aminostratigraphy of surface and subsurface Quaternary sediments,North Carolina coastal plain,USA

The Quaternary stratigraphy and geochronology of the Albemarle Embayment of the North Carolina (NC) Coastal Plain is examined using amino acid racemization (AAR) in marine mollusks, in combination with geophysical, lithologic, and biostratigraphic analysis of 28 rotasonic cores drilled between 2002 and 2006. The Albemarle Embayment is bounded by structural highs to the north and south, and Quaternary strata thin westward toward the Suffolk paleoshoreline, frequently referred to as the Suffolk Scarp. The Quaternary section is up to ～90 m thick, consists of a variety of estuarine, shelf, back-barrier, and lagoonal deposits, and has been influenced by multiple sea-level cycles. The temporal resolution of the amino acid racemization method is tested statistically and with the stratigraphic control provided by this geologic framework, and it is then applied to the correlation and age estimation of subsurface units throughout the region. Over 500 specimens (primarily Mercenaria and Mulinia) from the subsurface section have been analyzed using either gas chromatographic (GC) or reverse-phase liquid chromatographic (RPLC) techniques. The subsurface stratigraphic data are compared with AAR results from numerous natural or excavated exposures from the surrounding region, as well as results from NC beach collections, to develop a comprehensive aminostratigraphic database for the entire Quaternary record within the NC coastal system. Age mixing, recognized in the beach collections, is also seen in subsurface sections, usually where major seismic reflections or core lithology indicate the presence of stratigraphic discontinuities. Kinetic models for racemization are tested within the regional stratigraphic framework, using either radiocarbon or U-series calibrations or comparison with regional biostratigraphy. Three major Pleistocene aminozones [AZ2, AZ3, and AZ4] are found throughout the region, all being found in superposition in several cores. Each can be subdivided, yielding a total of at least eight stratigraphically and statistically distinct aminozones. Kinetic modeling, supplemented with local calibration, indicates that these aminozones represent depositional events ranging from ～80 ka to nearly 2 Ma. Three prominent seismic reflections are interpreted to represent the base of the early, middle, and late Pleistocene, respectively, roughly 2 Ma, 800 ka, and 130 ka. The large number of samples and the available stratigraphic control provide new insights into the capabilities and limitations of aminostratigraphic methods in assessing relative and numerical ages of Atlantic Coastal Plain Quaternary deposits.     

Structural deformation of the Leoville chondrite

Foliations defined by alignment of elongated chondrules have been noted previously in chondrites, but none displays this effect so well as Leoville (CV3). The shapes of Leoville chondrules were produced by deformation in situ, as indicated by inclusions and clasts with similar shapes and preferred orientations to those of chondrules. Similarities in the aspect ratios of apparent strain ellipses measured for chondrules alone (1.9 and 2.0 by several methods) and for the whole meteorite (2.0) indicate either that Leoville deformed homogeneously or that it deformed as a framework of touching chondrules. This amount of strain corresponds to approximately 33% uniaxial shortening, assuming constant volume. Because the strain ellipse was measured in only one orientation, this strain value is a minimum estimate for the meteorite. Lack of correlation between foliation and either shock or thermal effects argues that impact or metamorphism are unlikely to have produced this deformation. Compaction due to overburden from progressive accretion on the chondrite parent body is suggested to have been its cause.Estimates of maximum deviatoric stresses in the interiors of asteroid-sized bodies and constraints on maximum temperatures for CV3 chondrites are consistent with diffusional flow as the deformation mechanism for olivine in these chondrules. Diffusional flow is also suggested by the scarcity of observed lattice dislocations. Deformation of Leoville olivines by this mechanism at geologically reasonable strain rates appears to require higher temperatures than those believed to have been experienced by this meteorite (< 600°C). However, differences in olivine grain size, the presence of water, or a more complex deformation history might explain this discrepancy.     

Erosion Rate Prediction Model for Levee-Floodwall Overtopping Applications in Fine-Grained Soils

Characterizing soil erosion and predicting levee erosion rates for various levee soils and storm conditions during floodwall overtopping events is necessary in designing levee-floodwall systems. In this study, a series of laboratory scaled levee-floodwall erosion tests were conducted to determine erosion characteristics of fine grained soils subject to overtopping from different floodwall heights with variable flow-rates. A decreasing rate of erosion was observed as a pool of water was generated in the created scour hole at the crest of the levee model. The erosion rates were also assessed using jet erosion test (JET) and erosion function apparatus (EFA) tests. The results of levee-floodwall overtopping along with soil geotechnical characteristics such as plasticity index, compaction level, and saturation level of the levee soils as well as hydraulic parameters such as water overtopping velocity were used to develop a levee-floodwall erosion rate prediction model. Then, the results of JET and EFA were integrated to develop another prediction model for levee-floodwall erosion rate estimation. Consequently, the prediction models were evaluated by conducting additional tests and comparing the prediction results with the actual measured erosion rates.     

Stabilization of rock slopes using geogrid boxes

The effect of using geogrid boxes as a new approach for reinforcement of rock slopes (with a case study at rock slope perched along km 11?+?060 of Mianeh–Ardabil railway track) was investigated. The limit equilibrium (LE) and finite element (FE) analysis were conducted to predict the response of the slope to a broad range of possible conditions, namely dry, half saturated, and saturated states as well as static and quasi-static conditions. The objective is to contribute towards the establishment of best practice in the design and construction of engineered slopes. Various design considerations were developed to investigate the effect of varying height and width of geogrid boxes on the factor of safety. The LE and FE based methods were compared based on the factor of safety. The results demonstrated that considering the design consideration, installing geogrids yields increasing the stability of rock slope.