Influence of the zone of weakness on dip angle and shear heating of subducted slabs

We study the importance of the zones of weakness and the pattern of downgoing flow in steady-state models of subducting lithosphere, which interacts mechanically and thermally with the ambient mantle. The non-linear system of governing equations consists of (i) the momentum equation in stream function formulation and (ii) the steady-state heat transfer equation including conduction and advection of heat and dissipation. A finite element method has been applied to this system. We consider the viscosity to be a non-linear function of both the temperature and the stream function. In steady-state two-dimensional (2D) flow, the stream function isolines follow material trajectories. They are used to follow the top of the subducting slab, which because of its possible increase in water content, is assumed to have a lower viscosity. The zone of weakness has been thus obtained in the self-consistent fashion since the stream function as well as the temperature are the output from our modeling and no a priori assumptions about the shape of the bending lithosphere are taken into account. It was shown that several orders decrease of viscosity in the zone of weakness is required to obtain the dip angle of about 45°. If the decrease of viscosity is not sufficient enough, the subducted slab either sinks almost vertically or does not exhibit a plate-like behavior. We have also demonstrated that shear heating can unrealistically increase at the zone of weakness for fast subductions if decrease of viscosity is underestimated.     

A Modeling Study of the Effects of Anomalous Snow Cover over the Tibetan Plateau upon the South Asian Summer Monsoon

The effect of anomalous snow cover over the Tibetan Plateau upon the South Asian summer monsoon is investigated by numerical simulations using the NCAR regional climate model (RegCM2) into which gravity wave drag has been introduced. The simulations adopt relatively realistic snow mass forcings based on Scanning Multi-channel Microwave Radiometer (SNINIR) pentad snow depth data. The physical mechanism and spatial structure of the sensitivity of the South Asian early summer monsoon to snow cover anomaly over the Tibetan Plateau are revealed. The main results are summarized as follows. The heavier than normal snow cover over the Plateau can obviously reduce the shortwave radiation absorbed by surface through the albedo effect, which is compensated by weaker upward sensible heat flux associated with colder surface temperature, whereas the effects of snow melting and evaporation are relatively smaller.The anomalies of surface heat fluxes can last until June and become unobvious in July. The decrease of the Plateau surface temperature caused by heavier snow cover reaches its maximum value from late April to early May. The atmospheric cooling in the mid-upper troposphere over the Plateau and its surrounding areas is most obvious in May and can keep a fairly strong intensity in June. In contrast, there is warming to the south of the Plateau in the mid-lower troposphere from April to June with a maximum value in May.The heavier snow cover over the Plateau can reduce the intensity of the South Asian summer monsoon and rainfall to some extent, but this influence is only obvious in early summer and almost disappears in later stages.     

2002年我国沙尘暴天气特征分析

利用逐日8个时次地面天气报告资料，分析了2002年全国沙尘暴的时空分布特征。结果表明：2002年出现的12次沙尘暴过程以3月18～22日的强沙尘暴过程影响范围最广、强度最强；我国北方地区浑善达克沙地及其周边地区的沙尘暴日数最多。另外，2002年我国沙尘暴高频期集中、早春多于晚春。主要原因是前期北方持续气温偏高、降水偏少，3—4月上中旬影响我国的冷空气十分频繁且强度较强，4月下旬—5月上旬我国北方地区出现了几次较大范围降水，5月中下旬影响我国的冷空气势力较弱且位置偏东。     

煤层气在煤储层中的扩散及其影响因素

煤层气在煤储层中的扩散是指从煤基质孔隙表面上解吸的煤层气运移到割理系统的主要过程。发生扩散的前提条件是气体浓度差的出现，衡量扩散能力大小的重要参数是扩散系数。前者为由解吸速度、解吸气量和煤层气产量、井孔压力降等因素控制的动态参数，而后者为主要受扩散物质性质、扩散介质特征、扩散系统的温度、压力和孔隙结构形态等因素影响的静态参数。煤层气在煤储层中的扩散量与煤层气浓度差和扩散系数呈正比关系。     

HJ-1复合型钻井液的研究及应用

分析和探讨了HJ-1复合型钻井液对复杂地层护壁的作用机理及护壁性能试验情况，介绍了其在寨上矿区复杂地层钻探中的成功应用。     

地震CT技术在隧道工程中的应用

详细介绍了地震CT技术的原理及其特点，并结合工程实例，分析了它在隧道工程中对隧道前方地质情况进行超前预报的实用性，以及对工程施工的指导作用，指出了该技术在隧道工程领域的广阔应用前景。     

MODIS 1B影像几何纠正方法研究及软件实现

MODIS影像是一种新型和重要的数据。对MODIS 1B影像几何畸变原因进行了深入分析，选择了一种合适的纠正方法。对于1km分辨率MODIS 1B影像，直接采用1km分辨率的空间坐标进行几何纠正；对于250m和500m分辨率的MODIS 1B影像，先用三次样条曲线对坐标进行插值生成同分辨率的坐标，然后利用坐标插值结果对其进行几何纠正。由于MODIS影像在空问分布上的特殊性，采用前向和后向映射相结合的方式确定纠正后某一像素点在原始影像中的位置。根据该位置的条带重叠度，可以确定参与计算像素个数、搜索窗口的大小以及窗口的精确位置；采用归一化反距离加权插值法计算纠正后像素点的属性值。上述优化算法不仅保证了纠正后影像的质量，而且提高了数据处理速度。作者在Visual C 6．0环境下开发实现了上述算法。从坐标插值和几何纠正结果分析，无论是数据处理速度还是纠正后的影像质量和精度均达到要求。     

The Application of ARGO Data to the Global Ocean Data Assimilation Operational System of NCC

1. Introduction It is well-known that the state of ocean plays very important role in the climate change. But there is a paucity of the ocean observation data. The data distri- bution in the space, time and different components is very inhomogeneous, even in some areas, there are no any observation data. Hence, it brings some diffcul- ties to the scientists to study many problems relevant to ocean. This situation has been being changed since ARGO (Array for Real-time Geostrophic Oceanogra-…     

富铌玄武岩：板片熔体交代的地幔楔橄榄岩部分熔融产物

富铌玄武岩是一类具有特殊地球化学特征的岛弧玄武岩。与正常岛弧玄武岩相比，它具有硅饱和并富钠的特征；同时具有相对高的Nb（一般>7×10-6）、TiO2（1%～2%）和P含量，以及低的LILE/HFSE和HREE/HFSE比值，并富集高场强元素；它的原始地幔标准化微量元素图显示了弱的Nb、Ta负异常（有时出现弱的正异常），原始地幔标准化La/Nb比值小于2（但很少小于0.7），它是由受埃达克质熔体交代过的地幔橄榄岩部分熔融形成的。由于富铌玄武岩与埃达克岩是大洋板片俯冲作用的直接产物，因此，通过对该岩石组合及与俯冲作用有关的流体和熔体的研究，不仅可以查明洋壳俯冲作用过程中的岩浆活动特征，还可以阐明洋壳俯冲及壳幔相互作用，具十分重要的地质意义。