Impact of irrigated agriculture on groundwater-recharge salinity: a major sustainability concern in semi-arid regions

Intensive irrigated agriculture substantially modifies the hydrological cycle and often has major environmental impacts. The article focuses upon a specific concern—the tendency for progressive long-term increases in the salinity of groundwater recharge derived from irrigated permeable soils and replenishment of unconfined aquifers in more arid regions. This process has received only scant attention in the water-resource literature and has not been considered by agricultural science. This work makes an original contribution by analysing, from scientific principles, how the salinisation of groundwater recharge arises and identifies the factors affecting its severity. If not proactively managed, the process eventually will impact irrigation waterwell salinity, the productivity of agriculture itself, and can even lead to land abandonment. The types of management measure required for mitigation are discussed through three detailed case histories of areas with high-value groundwater-irrigated agriculture (in Spain, Argentina and Pakistan), which provide a long-term perspective on the evolution of the problem over various decades.     

Depositional setting,provenance, and tectonic-volcanic setting of Eocene–Recent deep-sea sediments of the oceanic Izu–Bonin forearc,northwest Pacific (IODP Expedition 352)

New biostratigraphical, geochemical, and magnetic evidence is synthesized with IODP Expedition 352 shipboard results to understand the sedimentary and tectono-magmatic development of the Izu–Bonin outer forearc region. The oceanic basement of the Izu–Bonin forearc was created by supra-subduction zone seafloor spreading during early Eocene (c. 50–51 Ma). Seafloor spreading created an irregular seafloor topography on which talus locally accumulated. Oxide-rich sediments accumulated above the igneous basement by mixing of hydrothermal and pelagic sediment. Basaltic volcanism was followed by a hiatus of up to 15 million years as a result of topographic isolation or sediment bypassing. Variably tuffaceous deep-sea sediments were deposited during Oligocene to early Miocene and from mid-Miocene to Pleistocene. The sediments ponded into extensional fault-controlled basins, whereas condensed sediments accumulated on a local basement high. Oligocene nannofossil ooze accumulated together with felsic tuff that was mainly derived from the nearby Izu–Bonin arc. Accumulation of radiolarian-bearing mud, silty clay, and hydrogenous metal oxides beneath the carbonate compensation depth (CCD) characterized the early Miocene, followed by middle Miocene–Pleistocene increased carbonate preservation, deepened CCD and tephra input from both the oceanic Izu–Bonin arc and the continental margin Honshu arc. The Izu–Bonin forearc basement formed in a near-equatorial setting, with late Mesozoic arc remnants to the west. Subduction-initiation magmatism is likely to have taken place near a pre-existing continent–oceanic crust boundary. The Izu–Bonin arc migrated northward and clockwise to collide with Honshu by early Miocene, strongly influencing regional sedimentation.     

SensePlace3: a geovisual framework to analyze place–time–attribute information in social media

SensePlace3 (SP3) is a geovisual analytics framework and web application that supports overview + detail analysis of social media, focusing on extracting meaningful information from the Twitterverse. SP3 leverages social media related to crisis events. It differs from most existing systems by enabling an analyst to obtain place-relevant information from tweets that have implicit as well as explicit geography. Specifically, SP3 includes not just the ability to utilize the explicit geography of geolocated tweets but also analyze implicit geography by recognizing and geolocating references in both tweet text, which indicates locations tweeted about, and in Twitter profiles, which indicates locations affiliated with users. Key features of SP3 reported here include flexible search and filtering capabilities to support information foraging; an ingest, processing, and indexing pipeline that produces near real-time access for big streaming data; and a novel strategy for implementing a web-based multi-view visual interface with dynamic linking of entities across views. The SP3 system architecture was designed to support crisis management applications, but its design flexibility makes it easily adaptable to other domains. We also report on a user study that provided input to SP3 interface design and suggests next steps for effective spatiotemporal analytics using social media sources.     

Warm frontal structure in association with a rapidly deepening extratropical cyclone

Abstract

The detailed characteristics of a CASPII warm frontal passage are presented in this article. This storm, Intensive Operating Period (IOP) 13 (February 26–27, 1992), was observed in detail with an array of diverse instruments. It has the advantage over earlier freezing precipitation studies of having simultaneous, in situ and remote sensing measurements by aircraft and ground‐based Doppler radar.

The associated precipitation was in the form of banded structures parallel to the front. Within these bands were embedded precipitation cores, some parallel to the band, some perpendicular. The warm front itself was characterized by major perturbations in its kinematic and thermodynamic features. The cores oriented parallel to the front were the result of embedded convection generated, at least in part, by the irregularities in the frontal surface.

The cores oriented perpendicular to the front were closely associated with the 0°C isotherm on the underside of the frontal inversion. Precipitation phase changes played a significant role in the occurrence of wide near 0°C regions, both vertically and horizontally. These regions had a profound influence on the observed precipitation types and led to complex precipitation‐thermodynamic‐dynamic interactions. Instabilities produced by these interactions are seen in wave‐like features observed by the Doppler radar in these regions, both parallel and perpendicular to the frontal zone.     

Non-equilibrium flocculation characteristics of fine-grained sediments in grid-generated turbulent flow

Results are presented from a series of settling column experiments investigating temporal variations in the flocculation characteristics of purely cohesive (kaolin clay) sediment suspensions and cohesive (kaolin) and non-cohesive (fine sand) sediment fraction mixtures. Experimental runs were conducted under controlled hydrodynamic conditions generated by a rigid array of in-phase oscillating grids. The results indicated that rapid initial floc aggregation occurred under low turbulent shear rates, with peak maximal and root-mean-square (r.m.s.) floc sizes (∼ 400 μm and ∼ 200 μm, respectively) attained after relatively short time periods, before reducing with time. By contrast, lower aggregation rates and smaller floc sizes were observed under higher shear conditions, with flocs retaining suspended in the settling column for longer time scales due to the increased turbulence. The mud input concentration displayed some correlation with maximal and r.m.s. floc sizes at higher shear rates but no correlation was apparent at low shear rates. This observed floc behaviour may be attributed to the differences in concentration gradients at high and low shear rates that affect both floc settling rate and time required for flocs to attain equilibrium size. The addition of the fine sand fraction to the kaolin clay suspension reduced both the initial floc formation (i.e. aggregation) rate and the maximal and r.m.s. floc sizes attained throughout the experiments. The reduction in maximal floc sizes appeared to be enhanced by an increase in the ratio of fine sand to kaolin clay content within the mixture.     

Trends,drivers and impacts of changes in swidden cultivation in tropical forest-agriculture frontiers: A global assessment

This meta-analysis of land-cover transformations of the past 10–15 years in tropical forest-agriculture frontiers world-wide shows that swidden agriculture decreases in landscapes with access to local, national and international markets that encourage cattle production and cash cropping, including biofuels. Conservation policies and practices also accelerate changes in swidden by restricting forest clearing and encouraging commercial agriculture. However, swidden remains important in many frontier areas where farmers have unequal or insecure access to investment and market opportunities, or where multi-functionality of land uses has been preserved as a strategy to adapt to current ecological, economic and political circumstances. In some areas swidden remains important simply because intensification is not a viable choice, for example when population densities and/or food market demands are low. The transformation of swidden landscapes into more intensive land uses has generally increased household incomes, but has also led to negative effects on the social and human capital of local communities to varying degrees. From an environmental perspective, the transition from swidden to other land uses often contributes to permanent deforestation, loss of biodiversity, increased weed pressure, declines in soil fertility, and accelerated soil erosion. Our prognosis is that, despite the global trend towards land use intensification, in many areas swidden will remain part of rural landscapes as the safety component of diversified systems, particularly in response to risks and uncertainties associated with more intensive land use systems.     

The role of tides in redistributing macrodetrital aggregates within the Swartvlei estuary

The Swartvlei estuary possesses a prolific growth of both intertidal and subtidal eelgrass,Zostera capensis. During 1984 less than 12% of the eelgrass beds were located in the upper half of the estuary, yet deposition ofZostera/macroalgal wrack in this region, when the estuary was linked to the sea (open phase), was similar to that in the lower half. Over a period of 20 semidiurnal tidal cycles there was a net gain of 2.5 tonnes dry mass of plant material into the upper reaches. Export of aquatic macrophytes and filamentous algae from the lower reaches toward the sea over 20 tidal cycles amounted to 1.6 tonnes dry mass. The amount of plant material transported during spring tides was 2 to 3 times greater than that carried during neap tides. Shallowing of the estuary mouth due to sand deposition resulted in a decline in the tidal prism and a decrease in macrodetrital flux. Total export ofZostera and associated algae amounted to 0.87 g ash-free dry mass m^?2d^?1 and represented a monthly export of 18% ofZostera bed biomass. Deposition of plant wrack during the 1984–1985 closed phase amounted to 63 g dry mass per meter of shore per day at the lower reaches site but only 10 g m^?1d^?1 was recorded at the upper reaches site. The relatively low latter value was attributed to the absence of tidal action which transports macrodetritus from the lower and middle reaches into the upper part of the system. During the 1984 open phase 70 g m^?1d^?1 was deposited at the lower reaches site and 68 g m^?1d^?1 at the upper reaches site. The role of tides in the redistribution of aquatic macrophyte primary production in the Swartvlei estuary was therefore clearly underscored.     

Dispersion of surface plumes in the Southern North Sea

Summary Continuous releases of fluorescent dye were made in the southern North Sea and the power law dependence of the plume width, represented by _y , against the diffusion time determined. The spreading was non-Fickian and could be represented in the form _y ² =B ² t whereB was a diffusion velocity of magnitude 1.4×10^–2 m/s. Such spreading was reproduced in both particle tracking and finite difference plume models by allowing the horizontal diffusivity,K _H, to depend linearly on diffusion time. The weakness of this method is that it is not clear how the diffusion parameters can be extrapolated to weather conditions that are different to those prevailing at the time of the experiments. However, comparable spreading rates were obtained by combining a Fickian diffusion model with an advective field that represented the near-surface current shears due to wind and waves. The resulting shear diffusion effect produced realistic simulation of the observed dispersion rates. An advantage of this approach is that it enables predictions to be made over a range of weather conditions provided that the wind and wave shears can be accurately parameterized.

---

Ausbreitung von Tracerwolken an der Oberfläche in der südlichen Nordsee

Zusammenfassung Fluoreszierender Farbstoff wurde in der südlichen Nordsee kontinuierlich freigesetzt und die Breite der Wolke, repräsentiert durch _y , in Abhägigkeit von der Ausbreitungszeit bestimmt. Die Ausbreitung folgte nicht dem Fickschen Ansatz und konnte in der Form _y ² =B ² t dargestellt werden, wobeiB eine Ausbreitungsgeschwindigkeit von der Größenordnung 1.4×10^–2 m/s darstellt. Eine derartige Ausbreitung wurde sowohl mit Modellen des Partikel-Tracking als auch mit Modellen der finiten Differenzen reproduziert, wobei die horizontale AusbreitungsgrößeK _H linear von der Diffusionszeit abhängig war. Die Schwäche dieser Methode ist, daß es nicht klar ist, wie die Diffusions-Parameter für andere Wetterbedingungen als zur Zeit des Experiments zu extrapolieren wären. Vergleichbare Ausbreitungsverhältnisse werden durch die Kombination eines Fickschen Diffusionsmodells mit einem advektiven Feld erreicht, welches die oberflächennahen durch Wind und Wellen verursachten Stromscherungen berücksichtigt. Der so resultierende Scher-Diffusions-Effekt erbrachte ein realistische Simulation der beobachteten Ausbreitung. Ein Vorteil dieses Vorgehens ist, daß es Vorhersagen über einen Bereich von Wetterbedingungen ermöglicht, vorausgesetzt, daß die durch Wind und Wellen verurschte Scherung zutreffend parameterisiert werden kann.

---

La dispersion de la panache de surface dans la partie sud de la Mer du Nord

Résumé A partir de déversements continus de produits fluorescents effectués dans la partie sud de la Mer du Nord, on a pu déterminer l'expression de la largeur du panache _y , par son carré en fonction du temps de diffusion. La dispersion n'était pas du type Fickian et était représentée sous la forme _y ² =B ² t aB était une vitesse de diffusion de grandeur égale 1.4×10^–2 m/s. Une telle dispersion peut être reproduite par une modélisation du panache à la fois par suivi de particules et aux différences finies en admettant que le coefficient de diffusion horizontaleK _H dépendait linéairement du temps. L'inconvénient de cette méthode est qu'il n'est pas facile de savoir comment les paramètres de diffusion peuvent être extrapolés à des conditions météorologiques différentes de celles prévalant au moment des expériences. Quoi qu'il en soit, des taux de dispersion comparables ont été obtenus en combinant un modèle de diffusion Fickian avec un champ d'advection qui représentait les cisaillements de courant de surface dus au vent et aux vagues. L'effet de diffusion du cisaillement résultant produisit une simulation réaliste des taux de dispersion observés. Un avantage de cette approche est de rendre possible des prédictions réalisées à travers un éventail de conditions météorologiques à condition que les cisaillements liés au vent et aux vagues puissent être paramétrisés avec précision.

---