电法勘探工作站程序设计技术

文章叙述了动态连接库和面向对象编程技术在电法勘探工作站设计中的应用,介绍了VC++和FORTRAN混合编程接口、图形模块接口及操作界面面向对象程序设计方法,采用这些技术降低了模块间的藕合性,提高了模块的内聚性,避免了重复编程和资源浪费,提高系统运行的稳定性和高效性.     

被污染土壤的植物修复研究

植物修复是利用植物吸收、降解、挥发、根滤、稳定、泵吸等作用机理,达到去除土壤、水体中污染物,或使污染物固定以减轻其危害性,或使污染物转化为毒性较低化学形态的现场治理技术.植物修复对于重金属污染土壤的治理修复具有重要意义.已有研究在累积与超累积植物的寻找筛选、植物对重金属等有害物的耐毒和解毒机理、植物修复现场环境调控及根际处理技术等方面取得了大量成果.现代分子生物学、基因工程技术发展有可能使植物修复技术取得重大突破.     

区域土壤环境地球化学研究——异常成因判别·环境质量·污染程度评价的思路与方法

从概念内涵和应用目标出发,认为土壤环境地球化学质量评价应该分为质量现状和污染程度两个方面.在此基础上探讨了区域地球化学资料在土壤环境现状质量评价、异常成因识别、污染元素累积速率和土壤污染程度评价研究的基本思路和方法.     

巴彦浩特盆地火成岩的综合地球物理解释

采用综合地球物理方法识别巴彦浩特盆地火成岩,首先利用高精度重磁资料和大地电磁测深资料,初步确定火成岩的平面位置和深度,然后利用钻遇火成岩的已知测井资料,建立人工合成地震记录,在地震剖面上标定出火成岩并分析其波组特征,采用BP神经网络进行火成岩的精细识别.研究表明,综合地球物理解释是提高反演解释精度的有效途径.     

中国大陆活动地块的运动与应变状态

从地壳运动与应变的角度给出了活动地块的定义,根据中国大陆及周边地区最近几年GPS观测得到的由1598个GPS站速度组成的统一速度场,估计了各个活动地块的运动与应变参数,分析了各个活动地块的运动与应变状态。中国大陆各地块存在一致的向东运动分量,但其南北分量是不一致的。西部地块存在一致的向北运动分量,东部地块存在一致的向南运动分量。在90°E以东,从喜马拉雅地块向NE方向,各地块的运动方向按顺时针方向旋转,各地块的运动速率是不相同的。从总体上看是西部大、东部小,南部大、北部小,西部大约是东部的3～4倍。各地块主压应变方向的空间分布是不相同的。在90°E以西各地块的主应变方向基本上为SN向,在青藏高原的东北部各地块的主压应变方向基本为NE向,在青藏高原东南部各地块的主压应变方向绕喜马拉雅构造东端顺时针方向旋转。各地块的主应变与剪应变率也是不同的,其中喜马拉雅、天山地块的主压和最大剪应变率最高,其次是拉萨、羌塘、滇西南、祁连与川滇地块。东部各地块的应变率较小。根据应变状态推测,喜马拉雅地块南北向的缩短速率为(15.2±1.5)mm/a,仍然是现今构造活动最强烈的地区,其次是天山地块,天山地块南北向的缩短速率为(10.1±0.9)mm/a。这两个地块目前仍处于隆升状态,从面应变看,面膨胀在中国大陆占优势,东部基本都是膨胀区,在西部面压缩与面膨胀从南向北相间分布。中国大陆的大多数东西向或近东西向断裂两侧的相对运动都是左旋或类似左旋走滑型的,大多数南北向断裂两侧的相对运动都是右旋或类似右旋走滑型的。GPS测定的阿尔金断裂中部的左旋走滑速为(4.8±1.3)mm/a,鲜水河断裂的左旋走滑速为(9.8±2.2)mm/a。地块边界断裂带的运动为地块运动创造了条件,地块及其边界的运动是协调一致的统一的,各个地块的活动程度是不相同的,统计检验结果表明,大多数地块之间的相对运动是显著的与非常显著的,这证明活动地块是客观存在的,喜马拉雅、拉萨、天山、羌塘和滇西南是活动最强烈的地块,中蒙、中朝西、阿拉善和华南是较稳定的地块,印度、太平洋、菲律宾板块与欧亚板块的互相作用力是中国大陆地块运动的主要驱动力。青藏高原地壳物质在印度板块NNE向的强烈推挤下,向NNE和NE方向运动,由于受到北部、东北部和东部地块的阻挡,经高原的东南部向印度洋方向运移,     

Movement and strain conditions of active blocks in the Chinese mainland

The definition of active block is given from the angles of crustal deformation and strain. The movement and strain parameters of active blocks are estimated according to the unified velocity field composed of the velocities at 1598 GPS stations obtained from GPS measurements carried out in the past years in the Chinese mainland and the surrounding areas. The movement and strain conditions of the blocks are analyzed. The active blocks in the Chinese mainland have a consistent E-trending movement component, but its N and S components are not consistent. The blocks in the western part have a consistent N-trending movement and the blocks in the eastern part have a consistent S-trending movement. In the area to the east of 90°E, that is the area from Himalayas block towards NE, the movement direction of the blocks rotates clockwisely and the movement rates of the blocks are different. Generally, the movement rate is large in the west and south and small in the east and north with a difference of 3 to 4 times between the rates in the west and east. The distributions of principal compressive strain directions of the blocks are also different. The principal strain of the blocks located to the west of 90oE is basically in the SN direction, the principal compressive strain of the blocks in the northeastern part of Qingzang plateau is roughly in the NE direction and the direction of principal compressive strain of the blocks in the southeastern part of Qingzang plateau rounds clockwisely the east end of Himalayas structure. In addition, the principal strain and shear strain rates of the blocks are also different. The Himalayas and Tianshan blocks have the largest principal compressive strain and the maximum shear strain rate. Then, Lhasa, Qiangtang, Southwest Yunnan (SW Yunnan), Qilian and Sichuan-Yunan (Chuan-Dian) blocks followed. The strain rate of the blocks in the eastern part is smaller. The estimation based on the stain condition indicates that Himalayas block is still the area with the most intensive tectonic activity and it shortens in the NS direction at the rate of 15.2±1.5 mm/a. Tianshan block ranks the second and it shortens in the NS direction at the rate of 10.1±0.9 mm/a. At present, the two blocks are still uprising. It can be seen from superficial strain that the Chinese mainland is predominated by superficial expansion. Almost the total area in the eastern part of the Chinese mainland is expanded, while in the western part, the superficial compression and expansion are alternatively distributed from the south to the north. In the Chinese mainland, most EW-trending or proximate EW-trending faults have the left-lateral or left-lateral strike-slip relative movements along both sides, and most NS-trending faults have the right-lateral or right-lateral strike-slip relative movements along both sides. According to the data from GPS measurements the left-lateral strike-slip rate is 4.8±1.3 mm/a in the central part of Altun fault and 9.8±2.2 mm/a on Xianshuihe fault. The movement of the fault along the block boundary has provided the condition for block movement, so the movements of the block and its boundary are consistent, but the movement levels of the blocks are different. The statistic results indicate that the relative movement between most blocks is quite significant, which proves that active blocks exist. Himalayas, Tianshan, Qiangtang and SW Yunnan blocks have the most intensive movement; China-Mongolia, China-Korea (China-Korea), Alxa and South China blocks are rather stable. The mutual action of India, Pacific and Philippine Sea plates versus Eurasia plate is the principal driving force to the block movement in the Chinese mainland. Under the NNE-trending intensive press from India plate, the crustal matter of Qingzang plateau moves to the NNE and NE directions, then is hindered by the blocks located in the northern, northeastern and eastern parts. The crustal matter moves towards the Indian Ocean by the southeastern part of the plateau.     

镍铜硫化物矿石中磁黄铁矿固溶体的退火及其选矿意义

磁黄铁矿固治体从硫化物熔体结晶后，在缓慢冷却过程中经历了显著的退火。出治和出治体的租化是固治体退火的两种方式。叶片状的单斜磁黄铁矿和“火焰状”的镍黄铁矿原始出治相在降温过程中均可发生退火和租化。分布于磁黄铁矿等矿物粒间或包于磁黄铁矿粒内的粒状镍黄铁矿，不只是高温出治的直接产物，有一部分可能是由火焰状出治体租化而成的。磁黄铁矿中单斜变体的出治和租化可使矿石的磁性发生改变，镍黄铁矿出治体的租化使含镍矿物的粒度加大。因而，退火作用对矿石的选矿工艺性能有着显著影响。     

GPS精密定位中的海潮位移改正

根据海洋负荷潮理论，利用NAO99b全球海潮模型，计算了中国部分IGS站的海潮位移改正，并将海潮位移改正应用到GPS数据处理当中。在GAMIT软件的解算过程中，分别按加入和不加入海潮位移改正，对GPS基线分量和测站坐标分别进行了计算和比较分析。结果表明，海潮位移改正无论是对GPS基线分量还是对测站坐标，都有一定的影响。     

GPS RTK应用中“假值”现象的分析与预防

GPS RTK中“假值”分析及预防,物探装备,GPS RTK是目前应用测量中广泛采用的一种新技术,但在应用过程中由于常常受客观环境因素及其它不可预见情况的影响,流动站GPS接受机有时采集的数据中会出现“假值”现象而导致测量采集成果错误。本文根据实践中积累的一些经验,从预防和判断的实用角度分别对“假值”的产生和特性进行了分析与说明,并提出具体的预防措施。     

GPS水准在测图中的实用性试验

依据大量的ＧＰＳ资料指出，测图中在较平坦或低丘地区，除利用其平面信息（ｘ，ｙ）外，还可利用其第三维信息（ｈ）。在不增加额外操作要求（即不增加ＧＰＳ测量成本）的条件下，ＧＰＳ水准高程精度可满足测图对高程精度的要求。这在一定程度上低于只利用ＧＰＳ二维信息（ｘ，ｙ）加上用常规水准测量来获得第三维信息（ｈ）的耗费的成本。