共查询到17条相似文献,搜索用时 163 毫秒
1.
南极国际GPS联测的海潮位移改正 总被引:1,自引:0,他引:1
根据海洋负荷潮理论,利用CRS4.0全球海潮模型,计算了参加南极国际GPS联测的中国南极长城站和中山站的海潮位移改正,并将海潮位移改正应用到GPS数据处理当中。在GAMIT软件的解算过程中,分别按加入和不加入海潮位移改正,对GPS基线分量进行了计算和比较分析。结果表明,对于南极国际GPS联测,海潮位移改正对GPS基线分量具有不可忽略的影响,数据处理时需要重点考虑。 相似文献
2.
3.
利用5种全球海潮模型,采用积分格林函数的方法计算了海洋潮汐负荷对中山站GPS测站的影响;并利用GAMIT软件对中山站2006年060~090的GPS数据进行了处理,分析了海潮负荷对GPS基线向量的影响。结果显示,海潮负荷对中山站GPS观测的影响是不可忽视的,联合利用中山站附近的海潮资料和全球海潮资料对于中山站GPS测量的海潮负荷位移改正意义重大。 相似文献
4.
利用5 种全球海潮模型,采用积分格林函数的方法计算了海洋潮汐负荷对中山站GPS 测站的影响;并利用GAMIT 软件对中山站2006 年060~090 的GPS 数据进行了处理,分析了海潮负荷对GPS 基线向量的影响.结果显示,海潮负荷对中山站GPS 观测的影响是不可忽视的,联合利用中山站附近的海潮资料和全球海潮资料对于中山站GPS 测量的海潮负荷位移改正意义重大. 相似文献
5.
Sherneck海潮系数对中国GPS网的适用性分析 总被引:1,自引:1,他引:1
叙述了海潮引起测站位移的计算公式 ,分析了利用 Sherneck海潮系数计算的海潮改正对中国 GPS网的影响 ,指出在高精度 GPS网中连续观测时间延长至 15 d是必要的 相似文献
6.
7.
8.
针对在不同位置地区进行高精度卫星导航定位中会受海潮负荷大小的影响,该文通过GAMIT/GLOBK对山东省、湖南省区域的国家GNSS基准站数据进行了解算,并分别对基线解结果、测站定位结果进行了分析探讨。结果表明,海潮负荷对整体测站的定位均有不同程度的影响,在U方向影响较大,且海潮负荷对近海区域的测站定位影响为对内陆地区测站影响的3~4倍;且海潮负荷造成影响不仅与基线长度有关,而且与基线端点的所处位置有关,近海地区测站相对内陆地区测站所受海潮负荷影响更大。因此,在解算国家站数据时,应当加入海潮负荷改正,尤其单独解算沿海测站时。 相似文献
9.
利用GPS技术反演海潮负荷信息,相比传统重力及甚长基线干涉测量,有着全球覆盖、测站数多、全天候、成本低等诸多优势,为海潮模型的建立提供了有效的技术手段,也对海潮负荷效应的研究有着重要的理论意义和参考价值。利用动态精密单点定位技术(precise point positioning,PPP)反演海潮负荷位移,同时构建了区域海潮负荷位移模型。利用香港连续运行参考站8 a的GPS观测数据,精密测定了11个测站的三维海潮负荷位移参数,与高精度海潮模型提供的海潮负荷位移参数进行比较,发现除K2、K1潮波外,其他潮波的均方根误差均小于2 mm。与已有的动态PPP及静态PPP结果对比发现,采用改进的重叠时段动态PPP算法可有效改善K1潮波的反演精度;该方法反演的海潮负荷位移精度可达到静态PPP反演海潮负荷位移的精度,且对于K1潮波,在东西方向,动态PPP算法的反演精度较静态PPP略有改善。利用最小二乘曲面拟合法可有效建立中国香港地区GPS区域海潮负荷位移模型,可有效弥补沿海地区因验潮站稀少而导致的海潮模型适应性差的问题。 相似文献
10.
邓军 《测绘与空间地理信息》2015,(8)
根据固体潮理论,利用IERS 2003规范,计算中国部分IGS站的固体潮位移改正,分别对加入和不加入固体潮位移改正,对测站坐标的影响进行计算和比较分析。结果表明,固体潮改正对测站坐标径向影响明显,其他方向不太明显。 相似文献
11.
This paper describes the ocean loading tides corrections of GPS stations in Antarctica, such as the Great Wall station and Zhongshan station. Based on the theory of ocean loading tides, the displacement corrections of ocean loading tides on GPS stations in Antarctica are calculated by using the CRS4.0 ocean loading tides model. These corrections are also applied to GPS data processing. The GPS data are analyzed by the GAMIT software with and without these corrections. We compared and analyzed the GPS baseline components to get the differences. The results show that the ocean tidal displacement corrections have obvious effects upon GPS baseline components. Therefore, we should not ignore the ocean loading tides corrections of GPS stations in Antarctica to obtain precise and reliable results. 相似文献
12.
在高精度GPS数据处理中,海潮的影响是一个不可忽略的因素。利用GAMIT软件解算2011年东南极沿海地区中国中山站及其周边6个IGS站的GPS数据,对比分析了FES2004、DTU10、EOT11a、GOT4.7、HAMTIDE11a、OSU12以及TPXO7.2等7个全球海潮模型在不同测站的海潮负荷差异,比较了海潮负荷对于GPS基线解的影响。结果表明,海潮负荷对GPS基线解的影响与测站所处位置及基线方位有关,达到cm级,相对影响达到10-8,因此,在高精度的GPS基线解算中必须考虑海潮的影响;但选用不同海潮模型对东南极沿海地区GPS基线解算的差异可忽略不计。 相似文献
13.
受特殊海岸线及复杂海底地形的影响,目前发布的全球海潮模型在局部沿海地区差异较大,需利用其他大地测量手段直接测定沿海地区的海潮负荷位移参数。GPS技术因具有全天候、精度高、成本低等优势,已成为获取海潮负荷位移参数的有效手段。本文基于GPS技术监测测站三维位移变化的灵敏度高于监测48个海潮参数的灵敏度这一基本思想,改进了利用GPS精密单点定位(PPP)技术估计48个海潮调和参数的方法,直接逐历元求解三维海潮负荷位移变化,再利用调和分析方法提取主要潮波(M2、S2、N2、K2、K1、O1、P1、Q1)的海潮负荷位移建模参数(振幅与相位)。利用12个香港连续运行参考站(CORS)8年的GPS观测数据,计算各测站的海潮负荷位移建模参数。与传统方法比较,本文方法可有效加速K1潮波在东西方向的收敛。将GPS海潮负荷位移建模参数估值与中国近海海潮模型值比较,发现除S2、K2和K1潮波的均方根误差较大外,其他潮波的均方根误差均小于1.5mm。将香港2008—2014年验潮站数据反演的潮波参数与海潮模型值比较,结果表明:GPS与验潮站数据反演的潮波参数均与中国近海海潮模型及HAMTIDE2011.11A全球海潮模型符合较好,验证了GPS PPP反演海潮负荷位移的有效性。采用GPS PPP估计的8个潮波的振幅与相位值替换全球海潮模型中对应的潮波值,进行海潮负荷效应改正,可减弱GPS长时间序列中的半周年信号。 相似文献
14.
采用FARRELL的负荷理论以及最新的TPXO6海潮模型和中国近海潮汐资料计算了海潮负荷对佘山台倾斜固体潮的影响,采用BAYTAP-G调和分析软件对佘山台倾斜固体潮观测进行了处理,获得不同潮波的潮汐参数。在此基础上进行海潮负荷改正。负荷改正后,东西分量的振幅因子和相位滞后与理论值较为接近,而南北分量的半日波振幅因子与理论值仍有较大的偏离。结果说明,佘山台倾斜东西分量主要受海潮负荷的影响,超过60%,甚至达到96%(O1);而南北分量受到的非潮汐的影响要比东西分量受到的影响大,如N2波甚至高达70%,但是这也可能是和海潮模型在近海的不精确有关。 相似文献
15.
Strategies for High Precision Processing of GPS Measurements with Application to the Amery Ice Shelf,East Antarctica 总被引:3,自引:0,他引:3
A number of statistic Global Positioning System (GPS) measurement campaigns have been made on a floating Antarctic ice shelf,
the Amery Ice Shelf, as part of ongoing glaciological studies designed to investigate the ice shelf dynamics, grounding zone
definition, and ice shelf strain. Such studies ar fundamental to improving out knowledge of the Antarctic ice-sheet mass balance
and dynamical models of ice sheet/ocean interaction. This article describes two techniques used to process the statistic GPS
data. One approach uses a segmented version of the classical static methodology, and the other approach adopts a new sequential
processing technique. Both approaches yield similar results for the station coordinates and demonstrate the potential of GPS
for extracting the tidal signal on the ice shelves and giving information on the dynamical motion of the ice sheet. To verify
our results for the vertical component, we compare the ice shelf GPS tidal signal with a tidal model derived from tide gauge
measurements at nearby Beaver Lake. Comparison of the GPS results with the tide model give good agreement in amplitude at
the few cm level (GPS results always larger) but clearly shows evidence of phase propagation of the ocean tidal wave under
the ice shelf. Improving the resolution of the tides over the ice shelves will be of tremendous benefit for future satellite
missions, such as Ice, Cloud and Land Elevation Satellite (ICESAT), and the integrated use of GPS and satellite data will
be fundamental for any on-going Antarctic ice sheet mass balance studies. ? 2000 John Wiley & Sons, Inc. 相似文献
16.
潮汐改正对精密GPS基线解算的影响 总被引:2,自引:1,他引:1
介绍了三类潮汐模型改正,分析了中国及周边地区不同类型、大尺度GPS网,研究了极潮、大洋潮、固体潮模型改正对定位精度的影响,给出了模型的使用方法. 相似文献
17.
Time-relative positioning makes use of observations taken at two different epochs and stations with a single global positioning
system (GPS) receiver to determine the position of the unknown station with respect to the known station. The limitation of
this method is the degradation over time of the positioning accuracy due to the temporal variation of GPS errors (ionospheric
delay, satellite clock corrections, satellite ephemerides, and tropospheric delay). The impact of these errors is significantly
reduced by adding to the one-way move from the known to the unknown station, a back move to the known station. A loop misclosure
is computed from the coordinates obtained at the known station at the beginning and at the end of the loop, and is used to
correct the coordinates of the unknown station. The field tests, presented in this paper, show that using the loop misclosure
corrections, time-relative positioning accuracy can be improved by about 60% when using single frequency data, and by about
40% with dual frequency data. For a 4-min processing interval (an 8-min loop) and a 95% probability level, errors remain under
20 cm for the horizontal components and 36 cm for the vertical component with single frequency data; and under 11 cm for the
horizontal components and 29 cm for the vertical component with dual frequency data. 相似文献