温度对土壤水分运动影响的研究进展

综述了温度对土壤水分运动的影响,温度影响的机理和考虑温度影响的土壤水分运动的数学模型,以及目前所用的实验研究方法,同时提出了本领域中存在的主要问题及研究展望.     

基于“网络工程”的GPS联测资料分析我国在欧亚板块中的运动规律

应用“中国地壳运动观测网络”1998年到 2 0 0 0年的多期 GPS联测数据 ,得到“网络工程”基准站和基本站各点在 ITRF97框架下的速度场 ,以及相对于 NNR- NUEARL1A模型的中国大陆板内运动速度场和相对于某一单站 (如 CHAN站 )的速度场 ,并对速度场信息的可靠性进行了初步分析。     

Application of the luciferase cell culture bioassay for the detection of refined petroleum products

A luciferase cell culture-based bioassay, developed to detect 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD)-like activity of halo-genated and polycyclic aromatic hydrocarbons, was optimized to detect refined petroleum products and to determine their relative inducing potency. Quality control standards from 32 refined products (gasolines and diesels, jet fuels, lubricating oils, fuel oils and weathered products) and three commercial products were evaluated. Induction equivalents (I-EQs) were determined by direct comparison of the EC50 and EC20 values (based on the median and 20% TCDD maximal response, respectively) from dose-response curves for each product to those obtained with TCDD. Most petroleum products were active in the luciferase bioassay, with those products composed of fractions produced later in the distillation process (i.e. fuel oils) inducing higher levels. Additionally, weathering of products reduced their induction potency. Based on the high I-EQ estimates of many products, biological effects associated with exposure may have been previously underestimated using other diagnostic methods.     

A UT1-Like Quantity from Analysis of GPS Orbit Planes

This paper discusses a UT1-like quantity, UTGPS, determined daily from Earth-referenced GPS satellite orbits from the International GPS Service (IGS). For each satellite considered, the observed relation between the satellite's IGS orbit and a model of its orbit plane in inertial space is used to estimate UT1. This modeled orbit plane is initialized using the satellite's IGS orbit and the actual UT1 at an initial time. It is then propagated using standard models of gravitational forces and an empirical model representing the orbit-normal radiation pressure observed during several years of in-flight experience with the satellite. To estimate UT1, an a-priori transformation from terrestrial to true-of-date celestial coordinates is applied to the satellite's IGS orbit. The geocentric angular deviations of points of the resulting transformed orbit from the modeled orbit plane are analyzed, giving the angle between the ascending nodes of the satellite's transformed and modeled orbit planes. To this observed angle between nodes, converted to a UT1 difference, is added the a-priori UT1 value used in the transformation. From the result is subtracted a model of the angle, again converted to a UT1 difference, between the ascending nodes of the actual and modeled orbit planes. The final result is the estimate of UT1 from this satellite, and the median of the UT1 estimates from all satellites considered is UTGPS. The root-mean-square difference between UTGPS-UT1 at the beginning and at the end of an interval of one to four weeks is approximately 30 s times the square root of the interval's duration in weeks.This revised version was published online in October 2005 with corrections to the Cover Date.     

The ALOMAR Rayleigh/Mie/Raman lidar: objectives, configuration, and performance

We report on the development and current capabilities of the ALOMAR Rayleigh/Mie/Raman lidar. This instrument is one of the core instruments of the international ALOMAR facility, located near Andenes in Norway at 69°N and 16°E. The major task of the instrument is to perform advanced studies of the Arctic middle atmosphere over altitudes between about 15 to 90 km on a climatological basis. These studies address questions about the thermal structure of the Arctic middle atmosphere, the dynamical processes acting therein, and of aerosols in the form of stratospheric background aerosol, polar stratospheric clouds, noctilucent clouds, and injected aerosols of volcanic or anthropogenic origin. Furthermore, the lidar is meant to work together with other remote sensing instruments, both ground- and satellite-based, and with balloon- and rocket-borne instruments performing in situ observations. The instrument is basically a twin lidar, using two independent power lasers and two tiltable receiving telescopes. The power lasers are Nd:YAG lasers emitting at wavelengths 1064, 532, and 355 nm and producing 30 pulses per second each. The power lasers are highly stabilized in both their wavelengths and the directions of their laser beams. The laser beams are emitted into the atmosphere fully coaxial with the line-of-sight of the receiving telescopes. The latter use primary mirrors of 1.8 m diameter and are tiltable within 30° off zenith. Their fields-of-view have 180 rad angular diameter. Spectral separation, filtering, and detection of the received photons are made on an optical bench which carries, among a multitude of other optical components, three double Fabry-Perot interferometers (two for 532 and one for 355 nm) and one single Fabry-Perot interferometer (for 1064 nm). A number of separate detector channels also allow registration of photons which are produced by rotational-vibrational and rotational Raman scatter on N₂ and N₂+O₂ molecules, respectively. Currently, up to 36 detector channels simultaneously record the photons collected by the telescopes. The internal and external instrument operations are automated so that this very complex instrument can be operated by a single engineer. Currently the lidar is heavily used for measurements of temperature profiles, of cloud particle properties such as their altitude, particle densities and size distributions, and of stratospheric winds. Due to its very effective spectral and spatial filtering, the lidar has unique capabilities to work in full sunlight. Under these conditions it can measure temperatures up to 65 km altitude and determine particle size distributions of overhead noctilucent clouds. Due to its very high mechanical and optical stability, it can also employed efficiently under marginal weather conditions when data on the middle atmosphere can be collected only through small breaks in the tropospheric cloud layers.     

人工多晶橄榄石样品孔隙压缩高温高压实验研究

人工制备多晶橄榄石样品的高孔隙度是实验关注的问题之一。本文着重研究在给定温度条件下人工多晶橄榄石样品高温高压孔隙压缩问题。文中给出了含水的湿样品和干燥样品孔隙度与实验压力的关系曲线,并提出了衡量样品压实程度的压实系数Ｖｏ／Ｖ的概念。     

青藏高原比如地体与措勤地体相对古构造位置判别

本文采用蚀源区判别图解QFL和QpLsLv、微量元素图解Th -Co -Zr/10、常量元素图解K2O/Na2O -SiO2 和野外地质实测剖面等方法 ,对比如、措勤地体的构造演化进行了分析。发现并证实了在T3-J1 以前比如地体位于措勤地体的北部 :J2 -3 时随着班—恕缝合带的拉张 ,比如地体开始右旋向东滑动 :一直延续到J3-K1 时 ,班—怒缝合带闭合 ,比如地体才就位于目前位置。最后应用1/ZTR指数推测了比如地体在J2 -3 时滑移点的大致位置 (E90°49,N31°34)。     

Finite difference modeling of contaminant transport using analytic element flow solutions

The two-dimensional implementation of the analytic element method (AEM) is commonly used to simulate steady-state saturated groundwater flow phenomena at regional and local scales. However, unlike alternative groundwater flow simulation methods, AEM results are not ordinarily used as the basis for simulation of reactive solute transport. The use of AEM-simulated flow fields is impeded by the discrepancy between a continuous representation of flow and a typically discrete representation of transport, and requires translation of the flow solution to a discrete analog. This paper presents a variety of methods for analytically calculating conservative discrete water fluxes and integrated components of the dispersion tensor across cell interfaces. An Eulerian finite difference method based on these AEM-derived parameters is implemented for use in simulation of 2D (vertically averaged) solute transport. This implementation is first benchmarked against existing methods that use standard finite difference flow solutions, then used to investigate the effects of an inaccurate discrete water balance. It is shown that improper translation of AEM fluxes leads to significant water balance errors and inaccurate simulation of contaminant transport.     

Effects of nitrate on phosphorus release: comparison of two Berlin lakes

After installation of phosphorus elimination plants at the inflows of the eutrophic Lake Tegel and Schlachtensee, phosphorus (P) loading declined by a factor of 40 and 100, respectively. This resulted in a pronounced reduction of phosphorus concentrations in the lake water, followed by a decline of chlorophyll‐a concentrations. However, for many years P release from sediments due to mineralization and desorption of sedimentary P continued. In Schlachtensee, the presence of nitrate above the sediment suppresses P release, because the Fe/P ratio is sufficient to provide enough aerobic sorption capacity. In Lake Tegel, some P release occurs even under aerobic conditions because of the low aerobic P sorption capacity of the sediments. There, nitrate could moderate the P release peaks which occur when the Fe‐P cycle at the sediment water interface is disturbed by precipitation of iron sulfide after reduction of sulfate during times of high mineralization intensity. The potentially mobile P pool in the sediments of both lakes is rather small, indicating that the P release could subside after sufficient reduction of the external P load in Lake Tegel and the disruption of the internal P cycle in Schlachtensee.     

中国与蒙古之地质

东昆仑中部缝合带清水泉一带发育石榴斜长紫苏麻粒岩、紫苏辉石黑云母石榴子石麻粒岩、石榴二辉斜长麻粒岩和石榴单斜辉石麻粒岩,它们与混合岩化黑云母石榴子石变粒岩、黑云母辉石变粒岩、石墨大理岩、含透辉石透闪石大理岩、透辉石大理岩、黑云斜长角闪岩和片麻岩等高级变质岩系以及纯橄岩、辉橄岩、橄长岩、辉长岩、辉绿岩和玄武岩等共同构成蛇绿混杂岩。麻粒岩相变质作用的温压条件为T=760~880℃,p=830~1200MPa,为高温中高压麻粒岩相变质作用,估算其形成深度为40~45km。麻粒岩相变质作用的SHRIMP锆石U-Pb年龄为(507·7±8·3)Ma。清水泉地区蛇绿岩形成于~520Ma,到~508Ma时俯冲至地下40~45km深处而发生中高压麻粒岩相变质作用,然后发生构造折返而剥露至地表。证实了清水泉高级变质岩和基性—超基性岩片是形成于早—中寒武世的蛇绿混杂岩,标志一个古生代早期的非常重要的板块汇聚边界,这对于进一步研究东昆仑造山带构造演化、乃至中国西部大地构造格局具有非常重要的意义。