Compressibility and shear strength of a residual soil

A detailed study was performed to investigate the compressibility and the shear strength of a residual soil in Omdurman, Sudan. The soil resulted from weathering of sandstone and mudstone. The soil is classified as sandy clayey silt (MH-CH) and is generally partially saturated. Consolidation tests were performed to study the compressibility of the soil and UU, CIU and insitu tests (CPT and SPT) were performed to study the shear strength characteristics of the soil. The characteristics of this residual soil can generally be predicted using correlations proposed in the literature for transported soils. The soil is of low to medium compressibility and exhibits slight apparent overconsolidation behavior. The soil dilates during shear and shows no long term effective cohesion. Problems associated with open cuts in this soil are attributed to loss of strength upon saturation.     

A Solution to the Problem of Predicting the Suitability of Silty–clayey Materials for Cement-stabilization

Major geotechnical problems in construction involving silty–clayey soils are due to their low strength, durability and high compressibility of soft soils, and the swell–shrink nature of the overconsolidated swelling soils. Confronted with these problems, a suitable ground improvement technique is needed, for deep excavations in soft clays, for stability, durability and deformation control. Cement-stabilization is one of the alternatives. An increase in strength and durability, reduction in deformability are the main aims of this method. Conventional cement-stabilization methods are used mainly for surface treatment. However, the use of cement has recently been extended to a greater depth in which cement columns were installed to act as a type of soil reinforcement (deep cement–soil mixing and cement jet grouting). In situ engineering properties of these silty–clayey soils are often variable and difficult to predict. For this reason cement-stabilization methods have a basic target to control the aforementioned engineering properties of these clays so that the properties of a silty–clayey soil become more like the properties of a soft rock such as clayey shale or lightly cemented sandstone. So cement-stabilization of these soils is essential to control their engineering properties and to predict their engineering behaviour for construction. In an effort to predict, classify and study the suitability of silty–clayey soils for cement-stabilization both slaking and unconfined compressive strength tests were carried out on clayey–sand mixtures consisted of two types of clays, kaolin and bentonite. Finally diagrams were prepared to study the variation of slaking and strength due to compaction, curing time and cement percentage and also to predict areas of efficient cement-stabilization.     

吉林台爆破料应力应变关系的三轴试验研究

通过室内大型三轴实验，研究了吉林台水库爆破料在不同级配下的应力应变关系，得到了在一定击实功下爆破料的最大干密度随细料含量变化的规律，分析了爆破料在不同级配和不同围压下应力与应变的变化规律、轴向应变与体积应变的关系及抗剪强度变化特性．从微观的角度说明了变化规律产生的原因，得出爆破料的抗剪强度随级配的变化而变化的规律．     

岩石三轴强度试验

通过自制岩石三轴压力室和配备液压泵与现有万能材料试验机组成岩石三轴试验系统，进行岩石三轴强度试验研究，并与其它方法比对，结果相近，满足了科研和生产的需要。     

基于立体补偿的遥感立体像对压缩方法

提出研究遥感立体像对的压缩问题。主要讨论了左右影像的视差补偿和辐射补偿。针对遥感立体像对视差分布不均以及左右影像存在辐射差的特点,提出了一种基于立体补偿的遥感立体像对压缩算法。该算法以左片为基准图像,采用自适应视差估计计算出右片的视差矢量,结合辐射校正和重叠块视差补偿技术得到平滑的右片的预测图像,以右片减去预测图像得到残差图像,然后采用小波压缩算法对残差图像进行压缩。实验结果表明,该算法能显著提高遥感立体像对的压缩性能。     

反扩散格式在二维锋生数值模拟中的应用

把无粘流中能成功捕捉接触间断的反扩散差分格式，用在了准地转二维理想锋生的数值模拟中，并将计算结果与Cullen的计算结果和半地转方程的精确解进行了比较。用反扩散格式模拟的锋面较Cullen的结果更加显，而且更接近半地转方程的精确解。     

三类高强度悬式瓷绝缘子的成分和物相分析

为探讨高原牌70kN和进口120，210kN瓷绝缘子的成分和结构性能，中采用原子吸收光谱（AAS）和X射线衍射（XRD）方法，对三类产品进行了检测。结果表明，有效成分除K2O外，70kN和210kN的SiO2,Al2O3,Fe2O3含量接近，主晶相基本相同，有刚玉，莫来石、石英和长石等；结晶相总量：70kN35%，120kN40%,210kN48%，这表明机械强度愈大，结晶相含量愈高，只需调整70kN原样的部分成分，粒度和工艺，即生产出高等级（如210kN)瓷绝缘子。     

Crack damage stress as a composite function of porosity and elastic matrix stiffness in dolomites and limestones

Twenty-five uniaxial compression tests were performed to determine stress at onset of dilation, referred to herein as “the crack damage stress,” in heterogeneous dolomites and limestones. A simplified model for crack damage stress (σ_cd) is developed here using porosity, elastic modulus, Poisson's ratio and three empirical coefficients. The model shows that when porosity decreases and elastic modulus increases, σ_cd rapidly increases and approaches its maximum value. On the other hand, when porosity increases and elastic modulus decreases, σ_cd rapidly decreases and approaches its minimum value. The proposed model is validated for six heterogeneous limestone and dolomite formations which are widely distributed in Israel.     

Structure sismique du socle paléozoı̈que du bassin des Doukkala,Môle côtier,Maroc occidental. Indication en faveur de l'existence d'une phase éo-varisqueSeismic structure of the Doukkala basin,Palaeozoic basement,western Morocco: a hint for an Eovariscan fold-and-thrust belt

Seismic profiles and well data from the Doukkala basin unravel the structure of the Palaeozoic basement and suggest that this coastal zone of western Morocco was affected by a compressive phase during the Frasnian. This resulted in the formation of upright, plurikilometric folds associated with reverse faults (North Doukkala), and of asymmetrical folds associated with mostly west verging ramps (South Doukkala). Folding involved all pre-Upper Frasnian formations and caused partial or total hiatus of Upper Frasnian–Strunian strata. This event can be correlated with the orogenic phase reported from more internal domains of the Morocco Hercynian belt, where it is referred to as the ‘Bretonne’ or ‘Eovariscan’ phase. To cite this article: H. Echarfaoui et al., C. R. Geoscience 334 (2002) 13–20     

建立医院间PACS系统的技术和实现

介绍了建立医院和医院之间PACS系统的意义；信息传输技术的不断发展，为建立院间PACS系统提供了物质基础，采用固定IP地址的中间存储空间和采用适当无损压缩方法是建立院间PACS系统的关键。