提高管线探测水平分辨率的技术方法

在平顶山矿工路路面改造工程中,使用GX-2型及RD-4000型地下管线探测仪探测地下管网布设情况。根据地下管线种类、管线布设方位、埋置深度、探测难度大小进行了多次试验,在此基础上确定了电磁探测技术与方法：利用直连法提高被测管线中的交变电流,压制邻近平行管线和地下介质中的异常反映;在多管并存、且间距较小的情况下,应选择“梯度法”对磁场水平分量垂直梯度ΔHx进行观测,以得到最大清晰异常;另外,还应根据具体情况,合理选择诸如压制旁侧管线法、选择发射法、偏移感应法、动源发射法等发射方式,保证目标管线中有较强异常呈现。在管线密集区,应尽可能地降低工作频率,以减小旁侧管线中产生的二次电流及二次磁场;为防止信噪比下降,可适当减小收发距,以提高接收机的灵敏度。     

地震勘探技术在深部找煤中的应用

成矿理论与勘探实践证明,东部一些老矿由于勘探深度、范围的限制以及认识上的局限,在矿区深部、周边仍有一些矿未能发现和查明,其中相当一部分仍具有找矿潜力;而寻找西部新的煤炭资源是国家“稳定东部发展西部”战略需要。针对中国东西部不同的地质条件和勘探目标,其地震勘探野外施工方法及资料处理原则有所差异;而资料解释在东部以查明地层赋存形态、煤层赋存范围、构造发育特征为主,西部则以寻找煤系地层波阻抗差异明显、连续性好的反射波组为解释重点。地震勘探技术在中国东西部的二个典型地震时间剖面佐证了其在深部找矿的应用效果。     

Sub-arcsec 10 μm imaging of β pictoris and other star disk candidates

We have used the ESO 10 m camera, TIMMI, to image with a very high angular resolution (PFoV: 0.3; FWHM:0.9) several main-sequence star disk candidates. Information on the -Pictoris dust disk has been obtained in a region largely inaccessible to previous observations: 0–80 AU, with a resolution of about 5 AU after deconvolution. Another promising target for 10 m imaging, 51 Ophiuchi, appears point-like.based on data collected at the European Southern Observatory (ESO), La Silla, Chile     

Energy efficiency evaluation,technology gap ratio,and determinants of energy productivity change in developed and developing G20 economies: DEA super-SBM and MLI approaches

This study employed Slack-based measure (SBM), Meta-frontier analysis, and Malmquist–Luenberger index (MLI) approaches to measure energy efficiency (EE), production technology heterogeneity, and energy productivity variation and its main determinants in developed and developing G20 countries for the period 1995–2020. The study's findings are: (i) Average EE for G20 countries is 0.8577, but still has an improvement potential of 14.23 percent. (ii) Developed countries have a higher average EE than developing (0.8927 > 0.8290). Results further revealed that energy efficiency scores in Argentina, Australia, Brazil, France, Saudi Arabia, South Africa, the US, the UK, and Korea are>1. (iii) Technology gap ratio (TGR) value in developed countries is higher than in developing (0.9869 > 0.6801), indicating that developed countries have advanced energy technologies superiority. The average MLI is less than one, showing a decline in energy productivity mainly due to a decline in technical efficiency, as EC < TC. (iv) Developed G20 countries get 0.64 percent aggregate growth in energy productivity as their MLI score is 1.0064, mainly due to technological growth (TC = 1.0161). Developing G20 countries, on the other hand, witnessed a decline in their energy productivity during 1995–2020, as MLI = 0.9925 > 1, designating that, on average, there is a 0.75 % decline in MLI.     

A realistic model for point-sources imaged on array detectors: The model and initial results

We have constructed a computer model for simulation of point-sources imaged on two-dimensional detectors. An attempt has been made to ensure that the model produces data that mimic real data taken with 2-D detectors. To be realistic, such simulations must include randomly generated noise of the appropriate type from all sources (e.g. source, background, and detector). The model is generic and accepts input values for parameters such as pixel size, read noise, source magnitude, and sky brightness. Point-source profiles are then generated with noise and detector characteristics added via our model. The synthetic data are output as simple integrations (onedimensional), as radial slices (two-dimensional), and as intensity-contour plots (three-dimensional). Each noise source can be turned on or off so that they can be studied separately as well as in combination to yield a realistic view of an image. This paper presents the basic properties of the model and some examples of how it can be used to simulate the effects of changing image position, image scale, signal strength, noise characteristics, and data reduction procedures.Use of the model has allowed us to confirm and quantify three points: 1) The use of traditionalsize apertures for photometry of faint point-sources adds substantial noise to the measurement which can significantly degrade the quality of the observation; 2) The number of pixels used to estimate the background is important and must be considered when estimating errors; and 3) The CCD equation normally used by the astronomical community consistently overestimates the signal-to-noise obtainable by a measurement while a revised equation, discussed here, provides a better estimator.     

Aftershocks series monitoring of the September 18, 2004 M = 4.6 earthquake at the western Pyrenees: A case of reservoir-triggered seismicity?

On September 18, 2004, a 4.6 mbLg earthquake was widely felt in the region around Pamplona, at the western Pyrenees. Preliminary locations reported an epicenter less than 20 km ESE of Pamplona and close to the Itoiz reservoir, which started impounding in January 2004. The area apparently lacks of significant seismic activity in recent times. After the main shock, which was preceded by series of foreshocks reaching magnitudes of 3.3 mbLg, a dense temporal network of 13 seismic stations was deployed there to monitor the aftershocks series and to constrain the hypocentral pattern. Aftershock determinations obtained with a double-difference algorithm define a narrow epicentral zone of less than 10 km², ESE–WNW oriented. The events are mainly concentrated between 3 and 9 km depth. Focal solutions were computed for the main event and 12 aftershocks including the highest secondary one of 3.8 mbLg. They show mainly normal faulting with some strike-slip component and one of the nodal planes oriented NW–SE and dipping to the NE. Cross-correlation techniques applied to detect and associate events with similar waveforms, provided up to 33 families relating the 67% of the 326 relocated aftershocks. Families show event clusters grouped by periods and migrating from NW to SE. Interestingly, the narrow epicentral zone inferred here is located less than 4 km away from the 111-m high Itoiz dam. These hypocentral results, and the correlation observed between fluctuations of the reservoir water level and the seismic activity, favour the explanation of this foreshock–aftershock series as a rapid response case of reservoir-triggered seismicity, burst by the first impoundment of the Itoiz reservoir. The region is folded and affected by shallow dipping thrusts, and the Itoiz reservoir is located on the hangingwall of a low angle southward verging thrust, which might be a case sensible to water level fluctuations. However, continued seismic monitoring in the coming years is mandatory in this area to infer more reliable seismotectonic and hazard assessments.     

高压旋喷桩有关问题的探索和研究

通过工程实例，介绍了单管法高压旋喷桩施工工艺、技术参数、施工中存在的问题以及注意事项。阐述了一些常见故障及预防措施。     

虚拟样机技术在地质工程机械领域的应用研究

基于对国内地质工程机械的研发现状的考虑，根据虚拟样机技术的特点，讨论了在地质工程机械领域实施虚拟样机技术的必要件，并提出了建立地质工程机械虚拟样机的策略。联合PRO／E、ANSYS及ADAMS建立了气动潜孔锤的虚拟样机模型，对气动潜孔锤虚拟样机进行了仿真，阐明了虚拟样机技术在地质工程机械领域的应用前景。     

Organizational Dynamics of the U.S. Logistics Industry: An Economic Geography Perspective*

Although the logistics industry provides critical services to all sectors of the economy, few studies exist in economic geography that examine and explain the organizational dynamics of this industry. This article highlights the significance of the logistics industry in contemporary industrialization and argues that an enriched understanding of the interaction between technology and space can be achieved by examining the evolution of an industry that plays a central role in the contemporary economy. We focus on dimensions that are identified as particularly important: organizational, geographic, and risk and security.