Accurate Determination of Sr Isotopic Compositions in Clinopyroxene and Silicate Glasses by LA‐MC‐ICP‐MS

The low‐Sr content (generally < 100 μg g^?1) in clinopyroxene from peridotite makes accurate Sr isotopic determination by LA‐MC‐ICP‐MS a challenge. The effects of adding N₂ to the sample gas and using a guard electrode (GE) on instrumental sensitivity for Sr isotopic determination by LA‐MC‐ICP‐MS were investigated. Results revealed no significant sensitivity enhancement of Sr by adding N₂ to the ICP. Although using a GE led to a two‐fold sensitivity enhancement, it significantly increased the yield of polyatomic ion interferences of Ca‐related ions and TiAr⁺ on Sr isotopes. Applying the method established in this work, ⁸⁷Sr/⁸⁶Sr ratios (Rb/Sr < 0.14) of natural clinopyroxene from mantle and silicate glasses were accurately measured with similar measurement repeatability (0.0009–0.00006, 2SE) to previous studies but using a smaller spot size of 120 μm and low‐to‐moderate Sr content (30–518 μg g^?1). The measurement reproducibility was 0.0004 (2s, n = 33) for a sample with 100 μg g^?1 Sr. Destruction of the crystal structure by sample fusion showed no effect on Sr isotopic determination. Synthesised glasses with major element compositions similar to natural clinopyroxene have the potential to be adopted as reference materials for Sr isotopic determination by LA‐MC‐ICP‐MS.     

High‐Precision Measurement of Molybdenum Isotopic Compositions of Selected Geochemical Reference Materials

Here we describe high‐precision molybdenum isotopic composition measurements of geological reference materials, performed using multi‐collector inductively coupled plasma‐mass spectrometry (MC‐ICP‐MS). Purification of Mo for isotopic measurements was achieved by ion exchange chromatography using Bio‐Rad AG^® 1‐X8 anion exchange resin. Instrumental mass bias was corrected using ¹⁰⁰Mo‐⁹⁷Mo double spiking techniques. The precision under intermediate measurement conditions (eighteen measurement sessions over 20 months) in terms of δ^98/95Mo was 0.10‰ (2s). The measurement output was approximately four times more efficient than previous techniques, with no compromise in precision. The Mo isotopic compositions of seven geochemical reference materials, seawater (IAPSO), manganese nodules (NOD‐P‐1 and NOD‐A‐1), copper‐molybdenum ore (HV‐2), basalt (BCR‐2) and shale (SGR‐1b and SCo‐1), were measured. δ^98/95Mo values were obtained for IAPSO (2.25 ± 0.09‰), NOD‐P‐1 (?0.66 ± 0.05‰), NOD‐A‐1 (?0.48 ± 0.05‰), HV‐2 (?0.23 ± 0.10‰), BCR‐2 (0.21 ± 0.07‰), SCo‐1 (?0.24 ± 0.06‰) and SGR‐1b (0.63 ± 0.02‰) by calculating δ^98/95Mo relative to NIST SRM 3134 (0.25‰, 2s). The molybdenum isotopic compositions of IAPSO, NOD‐A‐1 and NOD‐P‐1 obtained in this study are within error of the compositions reported previously. Molybdenum isotopic compositions for BCR‐2, SCo‐1 and SGR‐1b are reported for the first time.     

Magnetoconvection in Dependence on Roberts Number

Marginal instabilities in a horizontal unstably stratified rapidly rotating fluid layer permeated by an azimuthal magnetic field growing linearly with distance from the vertical rotation axis, are investigated in dependence on electromagnetic boundary conditions and Roberts number . Electrical conductivities of perfectly thermally conducting boundaries are either infinite or finite Earthlike ones. Following Soward's (1979) results the case of gives the instabilities of MAC-waves with much greater frequencies than for the case of q 1. Critical frequencies of MAC waves are most sensitive on Roberts number for q 1 and lose this sensitivity for q2. On the other hand the critical Rayleigh numbers are slightly dependent on q 1. Many qualitative differences in the dependences on q do exist for infinitely and finitely conducting boundaries. The former do not allow fast eastward modes for q 1 and the latter, e.g. allow eastward MC-waves with azimuthal wave number m = 1. The MC-waves are almost independent on Roberts number q.     

(LP)MCICPMS方法精确测定液体和固体样品的Sr同位素组成

MCICPMS是近年发展起来的高精度固体同位素分析仪器,利用MCICPMS可以精确测定Sr同位素组成,与TIMS相比,分析效率明显提高;对于含有Rb的实际样品,在Rb/Sr比值较小时(Rb/Sr<0.001),可以通过Rb扣除获得准确的87Sr/86Sr比值,而当Rb含量较高时,可以通过建立Rb/Sr与87Sr/86Sr偏差值的线性关系进行再一次校正,同样也可以获得准确的87Sr/86Sr比值.通过这种校正关系,可以直接分析固体微区的Sr同位素组成.     

Optimisation of Lithium Chromatography for Isotopic Analysis in Geological Reference Materials by MC‐ICP‐MS

The lithium isotope system can be an important tracer for various geological processes, especially tracing continental weathering. The key to this application is the accurate and precise determination of lithium isotopic composition. However, some of the previously established column separation methods are not well behaved when applied to chemically diverse materials, due to the significant variations in matrix/lithium ratios in some materials. Here, we report a new dual‐column system for lithium purification to achieve accurate and precise analysis of lithium isotopic compositions using a multi‐collector inductively coupled plasma‐mass spectrometer (MC‐ICP‐MS). Compared with single‐column systems, our dual‐column system yielded a consistent elution range of the lithium‐bearing fraction (7–16 ml) for samples with a large range of lithium loads and matrix compositions, so that column re‐calibration is not required. In addition, this method achieved complete lithium recovery and low matrix interference (e.g., Na/Li ≤ 1) with a short elution time (~ 6 h, excluding evaporation), with the entire procedure completed in 1.5 days. We report high precision Li isotopic compositions in twelve chemically diverse materials including seawater, silicates, carbonates, manganese nodules and clays. New recommended Li isotopic values and associated uncertainties are presented as reference values for quality control and inter‐laboratory calibration for future research and were consistent with previously published data. However, significant lithium isotopic variances (~ 1‰) in BHVO‐2 from different batches suggest Li isotopic heterogeneity in this reference material and that Li isotopic studies using this reference material should be treated with caution.     

Determination of the Tin Stable Isotopic Composition in Tin‐bearing Metals and Minerals by MC‐ICP‐MS

This study uses MC‐ICP‐MS for the precise analysis of the stable tin isotopic composition in ore minerals of tin (cassiterite, stannite), tin metal and tin bronze. The ultimate goal is to determine the provenance of tin in ancient metal objects. We document the isotope compositions of reference materials and compare the precision of different isotope ratios and the accuracy of different procedures of mass fractionation correction. These data represent a base with which isotopic data of future studies can be directly compared. The isotopic composition of cassiterite and stannite can be determined after reduction to tin metal and bronze, respectively. Both metals readily dissolve in HCl, but while the solutions of tin metal can be directly measured, the bronze solutions must be purified with an anion exchanger. The correction of the mass bias is best performed with an internal Sb standard and an empirical regression method. A series of Sn isotope determinations on commercially available mono‐element Sn solutions as well as reference bronze materials and tin minerals show fractionations ranging from about ?0.09‰ to 0.05‰/amu. The combined analytical uncertainty (2s) was determined by replicate dissolutions of reference materials of bronze (BAM 211, IARM‐91D) and averages at about 0.005‰/amu.     

矿体的MC参数特征及其在矿床勘探中的应用

厚度和品位是矿体的主要参数,两者既有区别又有联系.在解决某些地质问题时,把两者统一起来进行研究,能使问题更合理、有效地得到解决.通过提出MC参数概念,分析MC参数的特征,讨论了该参数在矿体矿化富集规律的研究、矿体资源/储量估算或资源/储量检验、估计资源/储量误差及确定合理勘探网度等方面的应用,说明了MC参数对矿床勘探应用的意义,并指出该参数的应用条件.