Expected Sliding Distance of Vertical Slit Caisson Breakwater

Evaluating the expected sliding distance of a vertical slit caisson breakwater is proposed. Time history for the wave load to a vertical slit caisson is made. It consists of two impulsive wave pressures followed by a smooth sinusoidal pressure. In the numerical analysis, the sliding distance for an attack of single wave was shown and the expected sliding distance during 50 years was also presented. Those results were compared with a vertical front caisson breakwater without slit. It was concluded that the sliding distance of a vertical slit caisson may be over-estimated if the wave pressure on the caisson is evaluated without considering vertical slit.     

Evaluation of pullout load capacity of suction caissons in sand using a three-dimensional displacement approach

An investigation was conducted to obtain analytical solutions for the pullout behavior of a suction caisson undergoing inclined loads in sand. The inclined load is transformed into an equivalent load system in which the vertical, horizontal, and moment loads are applied on the center of the lid of the suction caisson. The vertical and lateral stiffness coefficients along the skirt of the suction caisson in sands are presented using the new three-dimensional elastic solutions taking into account the nonhomogeneous and nonlinear properties of the sand. The vertical, lateral, and rocking stiffness coefficients on the base of the suction caisson are presented considering the solutions of a hollow rigid cylindrical punch acting on the surface of a soil. The yield, pullout, and failure for sands with the nonhomogeneous and nonlinear characteristics are taken into consideration. The effects of the load inclination, the loading depth, and the aspect ratio on the pullout load capacity of the suction caisson are presented. Behaviour of the suction caisson in sand prior to failure is clarified from the relationship between tensile load, displacement, and rotation and that between depth, vertical pressure, and lateral pressure.     

Vertical dynamic impedance of pile considering the dynamic stress diffusion effect of pile end soil

A new analytical model is presented to analyze the dynamic stress diffusion effect of pile end soil on the vertical dynamic impedance of the pile. The surrounding soil of the pile is modeled by using the plane strain model and the pile is simulated by using one-dimensional elastic theory. Finite soil layers below the pile end are modeled as conical fictitious soil pile with stress diffusion angle which reflects the dynamic stress diffusion effect of pile end soil. By means of the Laplace transform and impedance function transfer method, the analytical solution of the vertical dynamic impedance at the pile head in frequency domain is yielded. Then, a comparison with other models is performed to verify the conical fictitious soil pile model. Finally, based on the proposed solution, the selected numerical results are compared to analyze the influence of dynamic stress diffusion effect for different design parameters of the soil-pile system on the vertical dynamic impedance at the pile head.     

Land Cover Status in the Koshi River Basin,Central Himalayas

The Koshi River Basin is in the middle of the Himalayas, a tributary of the Ganges River and a very important cross-border watershed. Across the basin there are large changes in altitude, habitat complexity, ecosystem integrity, land cover diversity and regional difference and this area is sensitive to global climate change. Based on Landsat TM images, vegetation mapping, field investigations and 3S technology, we compiled high-precision land cover data for the Koshi River Basin and analyzed current land cover characteristics. We found that from source to downstream, land cover in the Koshi River Basin in 2010 was composed of water body (glacier), bare land, sparse vegetation, grassland, wetland, shrubland, forest, cropland, water body (river or lake) and built-up areas. Among them, grassland, forest, bare land and cropland are the main types, accounting for 25.83%, 21.19%, 19.31% and 15.09% of the basin’s area respectively. The composition and structure of the Koshi River Basin land cover types are different between southern and northern slopes. The north slope is dominated by grassland, bare land and glacier; forest, bare land and glacier are mainly found on northern slopes. Northern slopes contain nearly seven times more grassland than southern slopes; while 97.13% of forest is located on southern slopes. Grassland area on northern slope is 6.67 times than on southern slope. The vertical distribution of major land cover types has obvious zonal characteristics. Land cover types from low to high altitudes are cropland, forest, Shrubland and mixed cropland, grassland, sparse vegetation, bare land and water bodies. These results provide a scientific basis for the study of land use and cover change in a critical region and will inform ecosystem protection, sustainability and management in this and other alpine transboundary basins.     

东昆仑南缘韧性剪切带变形特征及其形成时代的限定

中生代巴彦喀拉-松潘甘孜地体向东昆仑地体斜向俯冲,在东昆仑南缘形成一条巨型的韧性剪切带。剪切带中发育的旋转碎斑、书斜构造、解理阶步、云母鱼、S-C组构、不对称褶皱、雁列脉等宏微观构造,显示剪切带兼具右行和左行的特征,且右行早于左行剪切,但总体以左行剪切为主。对西大滩糜棱岩化花岗岩和小南川未变形花岗岩进行了LA-ICP-MS锆石UPb测年,西大滩岩体侵位于199.3±2.2Ma,小南川岩体形成于196.4±1.3Ma。西大滩与小南川岩体中的锆石为典型的岩浆锆石,其年龄代表了岩体侵位的时代。鉴于2个岩体的变形程度完全不同,东昆仑南缘在199~196Ma之间发生了左行韧性剪切。     

基于岩石物理模型的页岩孔隙结构反演及横波速度预测

准确预测储层的等效孔隙纵横比对页岩储层岩石物理建模及横波速度预测具有重要意义。为分析页岩储层孔隙纵横比及预测横波速度,提出了基于岩石物理模型的页岩孔隙纵横比反演及横波速度预测方法。本文首先通过岩石物理模型建立岩石的纵、横波速度与孔隙纵横比、孔隙度和矿物组分等参数之间的定量关系,寻找最佳孔隙纵横比;然后通过使理论预测与实际测量的纵波速度之间误差达到最小的方式反演孔隙纵横比,并以此为约束预测横波速度。实际测井数据反演结果表明,龙马溪组页岩地层的孔隙纵横比稳定,而围岩的孔隙纵横比变化范围较大;说明与围岩相比,页岩的孔隙结构更为稳定。同时,预测得到的页岩横波速度与实测横波速度的误差较小,另外对于缺少矿物组分资料的页岩层段,用平均矿物组分预测得到的横波速度误差仍较小;说明与矿物组分相比,龙马溪组页岩的纵、横波速度对孔隙纵横比参数更敏感。综上所述,利用该方法可预测到较为准确的等效孔隙纵横比和横波速度。     

陕西泾阳南塬滑坡干湿黄土快速大剪切力学特性

借助于先进的多功能大型高速高压环剪试验机,针对陕西泾阳南塬滑坡中的饱和黄土、干燥黄土在快速大剪切位移条件下的力学响应特性进行了环剪试验研究。研究结果表明:1)在相同试验条件下,与干燥状态黄土相比,泾阳南塬黄土在饱和条件下抗剪强度指标降低。2)在连续快速剪切条件下,泾阳南塬滑坡饱和与干燥黄土均表现出应变软化特征,饱和黄土比干燥黄土的软化特征更加显著。3)在相同法向应力条件下,剪切速率对饱和和干燥黄土峰值强度均有显著影响,但两种状态下土体峰值强度随剪切速率变化特征不同。饱和黄土峰值强度随剪切速率的增大而增大,而干燥黄土峰值强度随剪切速率的增大而减小。4)在不同含水状态下,泾阳南塬滑坡黄土剪切力学特性变化规律具有不同的产生机理。其中,干燥黄土抗剪强度在连续剪切过程中主要受黏土颗粒间摩擦(阻)力、颗粒运移与定向排列以及剪切面形态的控制。与干燥黄土相比,饱和黄土峰值抗剪强度变化主要受土黏聚力的控制并受水的影响;土体内水的作用能够加剧其应变软化程度并可形成光滑平整的剪切面形态,进而对其峰后剪切应力变化产生影响。     

Comparison of web plate numerical models for self‐centering steel plate shear walls

Previous research has shown that self‐centering steel plate shear walls (SC‐SPSWs) are capable of achieving enhanced seismic performance at multiple hazard levels, including recentering following design‐level earthquakes. When modeling SC‐SPSWs numerically, these studies considered an idealized tension‐only steel plate shear wall (SPSW) web plate behavior. Research has shown that web plate behavior is more complex than predicted by the idealized model, and web plates can provide more strength, stiffness, and energy dissipation than predicted by the idealized model. The idealized model of web plate behavior is used widely in SPSW numerical models where the moment‐resisting boundary frame provides supplemental hysteretic damping and stiffness; however, in SC‐SPSWs, where the post‐tensioned boundary frame is designed to remain elastic during an earthquake, accounting for the more complex web plate behavior can have a significant impact on seismic performance estimates from numerical simulation. This paper presents different methods for modeling SC‐SPSWs. Responses from these models are compared with experimental results. A simple modification of the tension‐only model, referred to as the tension‐compression strip model, is shown to provide a reasonable approximation of SC‐SPSW behavior. Results from nonlinear response history analyses of SC‐SPSWs with the tension‐only and tension‐compression web plate models are compared to assess how the approximation of web plate behavior affects SC‐SPSW seismic performance. Copyright © 2015 John Wiley & Sons, Ltd.     

Effect of gravity framing on the overstrength and collapse capacity of steel frame buildings with perimeter special moment frames

This paper investigates the effect of the gravity framing system on the overstrength and collapse risk of steel frame buildings with perimeter special moment frames (SMFs) designed in North America. A nonlinear analytical model that simulates the pinched hysteretic response of typical shear tab connections is calibrated with past experimental data. The proposed modeling approach is implemented into nonlinear analytical models of archetype steel buildings with different heights. It is found that when the gravity framing is considered as part of the analytical model, the overall base shear strength of steel frame buildings with perimeter SMFs could be 50% larger than that of the bare SMFs. This is attributed to the gravity framing as well as the composite action provided by the concrete slab. The same analytical models (i) achieve a static overstrength factor, Ω_s larger than 3.0 and (ii) pass the collapse risk evaluation criteria by FEMA P695 regardless of the assigned total system uncertainty. However, when more precise collapse metrics are considered for collapse risk assessment of steel frame buildings with perimeter SMFs, a tolerable probability of collapse is only achieved in a return period of 50 years when the perimeter SMFs of mid‐rise steel buildings are designed with a strong‐column/weak‐beam ratio larger than 1.5. The concept of the dynamic overstrength, Ω_d is introduced that captures the inelastic force redistribution due to dynamic loading. Steel frame buildings with perimeter SMFs achieve a Ω_d > 3 regardless if the gravity framing is considered as part of the nonlinear analytical model representation. Copyright © 2014 John Wiley & Sons, Ltd.     

铅垂断层向错引起的地表重力变化

利用直立长方体组合模型以及坐标旋转理论,对铅垂断层向错引起的重力变化进行数值模拟,分别计算深度为1、5、10 km的铅垂断层在单一方向上、两个方向上向错引起的地面重力变化。结果表明,当断层在单一方向产生向错时,以左端点为基点的W1、W2向错引起的地面重力变化场均呈现以断层为轴线的对称分布|以中点为基点的W3向错引起的地面重力变化场构成四象限反对称分布。当断层在两个方向上同时产生向错时,以左端点为基点的W1W2向错引起的地面重力变化场呈现以断层为轴线的对称分布,整体显示W2向错起主导作用|以中点为基点的W2W3向错引起的地面重力变化场呈现非对称分布,整体也显示出W2向错起主导作用,断层附近的扭错现象为W3向错的作用。随着断层深度的增加,断层向错引起的地面重力变化值递减,但影响范围逐渐扩大。