Drag Coefficient,Dynamic Roughness and Reference Wind Speed

Surface waves are the roughness element of the ocean surface. The parameterization of the drag coefficient of the ocean surface is simplified by referencing to wind speed at an elevation proportional to the characteristic wavelength. The dynamic roughness is analytically related to the drag coefficient. Under the assumption of fetch limited wave growth condition, various empirical functions of the dynamic roughness can be converted to equivalent expressions for comparison. For datasets covering a wide range of the dimensionless frequency (inverse wave age), it is important to account for the variable rate of wave development at different wave ages. As a result, the dependence of the Charnock parameter on wave age is nonmonotonic. Finally, the analysis presented here suggests that the significant wave steepness is a sensitive property of the ocean surface and a single variable normalization of the dynamic roughness using a wavelength or wave height parameter actually produces more robust functions than bi-variable normalizations using wave height and wave slope.     

Scattering of Semidiurnal Internal Kelvin Wave at Step Bottom Topography

A three-dimensional, multi-level model was used to study the energy dissipation of semidiurnal internal Kelvin waves due to their interaction with bottom topography. A simplified topography consisting of a channel with an additional shallow bay was used to clarify the wave’s scattering process. When the first mode semidiurnal internal wave given at an open boundary arrives at the bay mouth, higher-mode internal waves are generated at a step bottom of the bay mouth. As a result, the energy of the first mode internal Kelvin wave is effectively decayed. The decay rate of the internal Kelvin wave depends on both the width and length of the additional bay. The maximum decay rate was found when a resonance condition occurs the bay, that is, the bay length is equal to a quarter of wave length of the first mode internal wave on the shallow region. The decay rate in the wide bay cases is higher than that in a narrow case, due to a contribution from the scattering due to the Poincare wave that emanates from the corners of the bay head. The decay rate with the additional bay is 1.1–1.8 times that of the case without the additional bay. The decay rate due to the scattering process is found to be of the same order as that of the internal and bottom friction.     

Numerical prediction of performance of submerged breakwaters

The results of a numerical model study on the transmission characteristics of a submerged breakwater are presented. Study aimed to determine the effect of depth of submergence, crest width, initial wave conditions and material properties on the transmission characteristics of the submerged breakwater. The results highlight the optimum crest width of the breakwater and optimum clear spacing between two breakwaters. A submerged permeable breakwater with d_s/d=0.5, p=0.3 and f=1.0, reduces the transmission coefficient by about 10% than the impermeable breakwater. The results indicates an optimum width ratio of B/d=0.75 for achieving minimum transmission. By restricting the effective width ratio of the series of breakwaters to 0.75, studies were conducted to determine the effect of clear spacing between breakwaters on transmission coefficient, suggesting an optimum clear spacing of w/b=2.00 to obtain K_t below 0.6.     

吉尼系数的计算及正态分布的吉尼系数

本文给出了吉尼系数的一般计算公式 ,推导出正态分布的吉尼系数渐进无偏估计 ,并以实例对比了传统的吉尼系数的算法——万分法与本文中提出的估计方法。     

Experimental study of reflection coefficient and wave forces acting on perforated caisson

The reflection coefficient and the total horizontal forces of regular waves acting on theperforated caisson are experimentally investigated. The empirical relationship between reflection coefficient and the ratio of the total horizontal forces acting on the perforated caisson to those on solid vertical walls with the relative chamber width, relative water depth and porosity of perforated wall, etc. are given. Moreover, the results of the ratio of the total horizontal forces are also compared with formulas given by Chinese Harbour Design Criteria and Takahashi, which may be useful for the practical engineering application.     

潟湖潮汐通道水力特性与治理

综合论述了潟湖潮汐通道口门之流速、断面面积、通道长度、延时角和饱满系数之间的关系,以及沿岸漂沙对口门的影响。对不同类型的潟湖潮汐通道,提出了中潮位射流导流堤、口门复式断面和通道分汊等治理方法及其通道口门相关尺度的具体计算。     

沟槽内海底管道的水动力特性研究

基于水力模型实验，引入相对沟形系数αｒ，获得了以αｒ为表征的相对水动力系数与ＫＣ数的关系；对于浅沟而言，这种关系较有规律性。根据所设计沟形的αｒ值和所选定的ＫＣ值，应用本文结果，可以方便地判断其力折减程度和掩护效果     

考虑底摩擦的波浪折射计算

本文用考虑底摩擦的折射模式计算了浅水中波高和波向分布。作为一个例子,根据不同的摩擦系数和不同的边界条件计算了一种简单海底地形的折射系数、衰减系数和折射角,所得结果与不考虑底摩擦的折射模式结果进行比较,发展它们之间存在一些差异,表明在浅水中底摩擦对波高有一定影响。     

An Experimental Study of Several Special Issues Regarding the Ice Force on Conical Structures

The effect of the cone spacing of a conieal structure on the ice force is studied by model experiments. The ice force reduction coefficient presented in this paper expresses the relationship between the ice force and the arrangement of cones. The experiments prove that the mode of the ice failure before the boundary of upward-downward bending cone (UDBC) is crushing. A conclusion can also be drawn from the experiments that the ice force on the boundary of UDBC is by far less than that on a vertical pile with the same diameter. Moreover, the ice force frequencies on upright and inve-rted cones are obtained under the field condition of the platform JZ20-2, respectively. The results show that the alterna-tion of the ice force on UDBC can hardly induce resonance of platform JZ20-2.