萝北井水位年动态变化研究

详细讨论了萝北井的年动态变化趋势,并分析了其成因机制。结果表明萝北井各年动态变化曲线出现的Ｗ形异常与地下构造活动无关,主要是由于农田用水引起。     

一种基于时延的水下声基阵坐标估算方法

阵形估算是水听器阵列应用中的关键问题,基于时延的水下声基阵大地坐标标定方法利用声源发射和声阵接收的CW脉冲之间的时延获得空间中的三个声源发射点到阵元的距离,并以这三个声源发射点为圆心,以声源发射点到阵元的距离为半径做球面,得到的交点即为阵元的大地坐标.通过实验数据分析结果可以得出如下结论:基于时延的球面交汇法得到的阵形标定结果的绝对误差均值为0.13 m,可以把该方法运用于实际的工程测量当中.     

Shell‐shape and morphometric variability in Mytilus galloprovincialis from micro‐tidal environments: responses to different hydrodynamic drivers

Tidal conditions differently influence inter‐tidal organisms in terms of general physiological and metabolic responses. In this study we investigated the morphological response in shells of Mytilus galloprovincialis native to different micro‐tidal coastal environments in the Northern Adriatic Sea. Our purpose was to highlight the ecophenotypic variability across tidal levels and to elucidate how tidal currents and waves produced by anthropogenic activities may play a part in modulating shell morphology. Three sampling sites were selected: an open‐sea area 15 km off‐shore and two sites within the lagoon of Venice, the first near one of its three inlets, and the other one in the proximity of Venice city centre. At each sampling site, organisms were seasonally collected at different depths within their vertical zonation, either in the inter‐tidal zone – i.e. at both the highest and lowest tide zonation limits, and subtidally. The mussel shells were analysed by investigation of their morphometric relationships (height/length and width/length ratios) and by elliptic Fourier analysis of the shell contours. Shell thickness and condition index were also evaluated for a better comprehension of energy allocation/partitioning. Estimates based on long‐term measurements, visual observation, wind statistics and wave growth laws allowed an evaluation of the forces acting on shells. At the open‐sea site, the observed phenotypic variability of both shell shape and thickness was clearly related to the tidal vertical zonation. At the two lagoon sites, the currents generated by tidal flow through the inlet and the waves caused by the frequent passage of boats influenced both shell shape and thickness. A trade‐off between protection and growth was apparent along the tide gradient, as emphasized by the differences in the partitioning and allocation of energy between shell and flesh production.     

洞庭盆地中更新世洞庭湖组砾石特征及其意义

对位于洞庭盆地安乡凹陷东南部的两护村ZKC1孔中更新世洞庭湖组砾石层进行了粒度和砾态的统计分析。结果表明,砾石的粒度变化反映出2个较大尺度的由大→小的旋回,早旋回由洞庭湖组下段砂砾层组成,晚旋回由洞庭湖组中段上部的砂砾层组成,反映出中更新世早-中期安乡凹陷的两次由慢→快的幕式沉降过程。在上述2个大的粒度旋回之上,叠加有多个更小尺度的砾石粗、细变化,主要与气候干湿的频繁波动有关。洞庭湖组中段顶部砾石的磨圆度明显偏低,反映其沉积时期盆地沉降和周缘隆起区抬升活动的增强。     

导管架式海上风力发电支撑结构振型扩阶方法

提出1种适用于海上风力发电支撑结构的模态振型扩阶方法。该方法无需借助转换矩阵实现振型扩阶,而是依靠实测模态并通过修正有限元模型对应振型在未测试自由度的振型值而获得空间完备的模态振型,并且所发展的方法在一定程度上可以忽略有限元模型存在的建模误差,是1种直接的估算方法,计算效率相对较高。文中采用三桩导管架式海上风力发电支撑结构验证提出方法的正确性以及在低阶模态振型扩阶上的优越性。数值结果表明,该方法对传感器位置、数量依赖程度低,尤其对于海上风电结构,仅在结构的水深较浅部位布置少数传感器即可比较精确的实现低阶模态振型扩阶,具有良好的工程应用前景。     

Deriving airborne laser scanning based computational canopy volume for forest biomass and allometry studies

A computational canopy volume (CCV) based on airborne laser scanning (ALS) data is proposed to improve predictions of forest biomass and other related attributes like stem volume and basal area. An approach to derive the CCV based on computational geometry, topological connectivity and numerical optimization was tested with sparse-density, plot-level ALS data acquired from 40 field sample plots of 500–1000 m² located in a boreal forest in Norway. The CCV had a high correspondence with the biomass attributes considered when derived from optimized filtrations, i.e. ordered sets of simplices belonging to the triangulations based on the point data. Coefficients of determination (R²) between the CCV and total above-ground biomass, canopy biomass, stem volume, and basal area were 0.88–0.89, 0.89, 0.83–0.97, and 0.88–0.92, respectively, depending on the applied filtration. The magnitude of the required filtration was found to increase according to an increasing basal area, which indicated a possibility to predict this magnitude by means of ALS-based height and density metrics. A simple prediction model provided CCVs which had R² of 0.77–0.90 with the aforementioned forest attributes. The derived CCVs always produced complementary information and were mainly able to improve the predictions of forest biomass relative to models based on the height and density metrics, yet only by 0–1.9 percentage points in terms of relative root mean squared error. Possibilities to improve the CCVs by a further analysis of topological persistence are discussed.     

庐枞盆地泥河铁矿床成矿岩体三维形态学分析及找矿指标研究

泥河铁矿床位于长江中下游成矿带内庐枞盆地的西北部,属玢岩型铁矿床,前人对该矿床的基础地质研究已有一定成果,积累了大量的数据资料,表明泥河铁矿床的形成与辉石闪长玢岩顶面形态关系密切。本文选择泥河铁矿床闪长玢岩为研究对象,以钻孔资料为依据,采用离散光滑插值法建立成矿岩体的精细三维模型,重现了闪长玢岩体的形态特征,将三维模型离散化后提取岩体顶面并通过三维形态分析方法进行数值分析,提取了岩体表面的隆起、凹陷形态,并与已知矿体进行对比,验证了该矿床成矿岩体隆起形态与矿体位置的对应关系。本文通过多次实验确定最佳表达的滑动窗口尺寸和与成矿岩体形态有关的找矿指标,结果证明利用10×10个单元的滑动窗口可以识别80%以上矿体。本文对三维成矿预测中三维空间分析方法进行探索,证明成矿岩体三维形态分析方法的有效性,这一方法可直接应用于与泥河铁矿床类似的玢岩型铁矿床三维成矿预测中。     

面向道路网络地图示意化的线形简化方法

针对当前示意网络地图线形状简化方法中存在需要人工干预或地图认知度低的问题,本文提出自动化程度高并能保证良好地图认知的线形状简化方法.该方法通过合理设定线形状简化中所需的阈值以避免人工干预,提高了线形状简化过程的自动化程度,并通过在简化过程中应用平滑算法,以减少示意结果中线对象在方向上的转折数,从而提高了简化度和清晰度.试验表明该方法不仅可以生成清晰的示意结果,并且能够保证良好的地图认知度.     

星康吉鳗精子的超微结构研究

为探讨星康吉鳗(Conger myriaster)精子的超微结构和形态,应用扫描电镜和透射电镜对星康吉鳗精子结构进行观察。结果表明,精子由头部、中段和鞭毛3部分组成,有其独特的结构,总长度为35.75± 1.15µm。精子头部为新月形,主要由细胞核构成,细胞核内有核泡,无顶体结构。精子头部的质膜内包含单一的线粒体。精子头部长为3.33±0.16 um,头宽为1.12±0.13 um。在精子头部的凸面上,有4条从中段到头端的条纹。精子中段伸出一支根,支根位于精子的中段末端。精子中段长度为0.55±0.05 um,支根长度为1.38±0.08 um、直径为90.48±6.06 nm。精子尾部鞭毛细长,鞭毛横切面呈圆形,无侧鳍,鞭毛的轴丝结构为“9+0”型;一些鞭毛的末端呈现卷曲状,发育机制尚不明确。精子鞭毛长为31.16±1.51µm,鞭毛直径为0.17±0.01µm。通过比较分析发现精子的这些形态学特征不仅表现在星康吉鳗精子,还表现在鳗鲡目其他属的精子;表明是鳗鲡目精子的共同特征。本研究揭示了星康吉鳗精子的形态结构,为突破星康吉鳗人工繁殖技术提供了理论参考。