Origin of the Breno and Esino dolomites in the western Southern Alps (Italy): Implications for a volcanic influence

The Esino Limestone of the western Southern Alps represents a differentiated Ladinian-Lower Carnian (?) carbonate platform comprised of margin, slope and peritidal inner platform facies up to 1000 m thick. A major regional subaerial exposure event lead to coverage by another peritidal Lower Carnian carbonate platform (Breno Formation). Multiphase dolomitization affected the carbonate sediments. Petrographic examinations identified at least three main generations of dolomites (D1, D2, and D3) that occur as both replacement and fracture-filling cements. These phases have crystal-size ranges of 3–35 μm (dolomicrite D1), 40–600 μm (eu-to subhedral crystals D2), and 200 μm to 5 mm (cavity- and fracture-filling anhedral to subhedral saddle dolomite D3), respectively.The fabric retentive near-micritic grain size coupled with low mean Sr concentration (76 ± 37 ppm) and estimated δ¹⁸O of the parent dolomitizing fluids of D1 suggest formation in shallow burial setting at temperature ∼ 45–50 °C with possible contributions from volcanic-related fluids (basinal fluids circulated in volcaniclastics or related to volcanic activity), which is consistent with its abnormally high Fe (4438 ± 4393 ppm) and Mn (1219 ± 1418 ppm) contents. The larger crystal sizes, homogenization temperatures (D2, 108 ± 9 °C; D3, 111 ± 14 °C) of primary two-phase fluid inclusions, and calculated salinity estimates (D2, 23 ± 2 eq wt% NaCl; D3, 20 ± 4 eq wt% NaCl) of D2 and D3 suggest that they formed at later stages under mid-to deeper burial settings at higher temperatures from dolomitizing fluids of higher salinity, which is supported by higher estimated δ¹⁸O values of their parent dolomitizing fluids. This is also consistent with their high Fe (4462 ± 4888 ppm; and 1091 ± 1183 ppm, respectively) and Mn (556 ± 289 ppm and 1091 ± 1183 ppm) contents, and low Sr concentrations (53 ± 31 ppm and 57 ± 24 ppm, respectively).The similarity in shale-normalized (SN) REE patterns and Ce (Ce/Ce*)_SN and La (Pr/Pr*)_SN anomalies of the investigated carbonates support the genetic relationship between the dolomite generations and their calcite precursor. Positive Eu anomalies, coupled with fluid-inclusion gas ratios (N₂/Ar, CO₂/CH₄, Ar/He), high F⁻ concentration, high F/Cl and high Cl/Br molar ratios suggest an origin from diagenetic fluids circulated through volcanic rocks, which is consistent with the co-occurrence of volcaniclastic lenses in the investigated sequence.     

A novel method to estimate mineral compositions of mudrocks: A case study for the Canadian unconventional petroleum systems

The mineral composition of mudrocks is an essential attribute in controlling the reservoir quality of unconventional petroleum systems. The present study introduces a semi-quantitative method to estimate mineral phases of mudrocks in various Canadian unconventional hydrocarbon systems using total elemental analysis (inductively coupled plasma-mass spectrometry (ICP-MS)) and Rock-Eval data (total organic carbon (TOC) and mineral carbon (MinC)).This method involves statistical analysis based on a sound knowledge of hydrocarbon source rock inorganic geochemistry. The workflow can be divided into four steps: (i) converting major elements (Si, Al, Fe, K, Na, Ca, Mg, Ti, and P) to their oxides, (ii) inferring modes of occurrence of elements using statistical analysis of geochemical data (major elements, TOC, and MinC), (iii) identifying the mineral types (oxide, aluminosilicates, carbonates, sulfide, and phosphate) according to elemental occurrences and calculating mineral phase concentrations, and (iv) verifying the results by comparing to XRD data on selected samples. The results, especially for brittle minerals such as quartz, carbonates (e.g. calcite, dolomite, and ankerite), and pyrite, show that the estimated mineral compositions correspond closely and consistently with measured mineralogy obtained from XRD. This method takes advantage of bulk geochemical data already available for hydrocarbon potential and chemostratigraphic studies, without devoting additional samples and cost for XRD analysis.     

南海中尺度涡强度的季节和年际变化分析

为了研究南海中尺度涡强度的季节和年际变化规律,利用Matlab提取50 a(1958~2007年)简单海洋资料同化(Simple Ocean Data Assimilation,SODA)月平均数据集中流场和海表面高度场数据,应用一个涡旋自动探测算法对南海中尺度涡初始生成位置进行分析,并分析了海表面高度异常均方根值的季节变化和年际变化。结果表明:50 a里南海中尺度涡主要分布在吕宋岛西北海域、吕宋岛西南海域和越南以东广大海域,秋、冬季中尺度涡能量较高,春季中尺度涡最弱,中尺度涡强度高值区年际变化明显。从季节变化上看,海面高度异常均方根春、夏季最小,秋冬季最大;从年际变化上看,与同时期Nino3指数有显著负相关,周期大约为3 a。     

长江口及其邻近海域叶绿素a分布特征及其与低氧区形成的关系

于2013年3月和8月研究了长江口及其邻近海域叶绿素a的分布特征,并对环境因子和长江冲淡水对浮游植物生物量分布的影响进行了探讨。结果表明,叶绿素a浓度在丰水期较高,平均值为5.18μg/L,最高值达32.05μg/L,现场海水出现变色现象;与同期历史资料对比分析,发现该海域叶绿素a浓度呈现出波动增长趋势。丰水期与枯水期叶绿素a的相对高值区均位于冲淡水的中部,122.5°E~123°E之间;丰水期在调查海域出现溶解氧低值区与低氧区,最低值仅为0.64 mg/L;发现低氧区出现位置北移、面积扩大和溶解氧最低值下降的趋势。底层溶解氧低值区分布与表层叶绿素高值区大致吻合,表明低氧现象与表层浮游植物的生长和现存量密切相关,在跃层存在的水体中表层浮游植物的大量繁殖易造成底层低氧区的出现。     

高温刺激导致虾夷扇贝死亡因素的探究

本文探究了高温刺激导致一龄和二龄虾夷扇贝死亡的原因。在高温刺激以及恢复过程中,两种贝龄的扇贝存活率存在显著差异(P0.05),同时两者的谷丙转氨酶(glutamic-pyruvic transaminase,GPT)活性、p53蛋白含量、总抗氧化能力(total antioxidant capacity,TAOC)以及HSP70(heat shock protein 70)含量在高温刺激以及恢复过程中的变化均存在显著差异。而且这些酶的活性(TAOC活性除外)以及蛋白质含量(p53以及HSP70)均受到贝龄、处理时间以及两者综合作用的显著影响。经过Cox模型分析可知,虾夷扇贝受到高温刺激后的存活受到贝龄、GPT活性、TAOC活性、p53含量以及HSP70含量的显著影响。此外,高温刺激会影响扇贝的心跳频率以及心输出量,从而影响心脏对机体的供氧供血能力,影响扇贝对高温的适应能力。     

基于SMOS卫星数据的海表面盐度模型

海表面盐度是研究海洋对全球气候影响以及大洋环流的重要参量之一,而卫星遥感技术是获取海表面盐度数据的最有效方法.目前,L波段的SMOS和Aquarius/SAC-D遥感卫星正在用于探测海表面盐度,并根据卫星观测数据和物理机制反演出海表面盐度的产品.但在某些近陆地区域,由于淡水流入及陆地射频(RFI)等因素影响,卫星反演盐度的产品精度较低.文中利用“东方红2号”科学考察船的实测数据、SMOS卫星数据,首次针对中国南海海域提出了用贝叶斯网络模型计算海表面盐度,并用验证数据集(实测Argo盐度)对模型进行适应性评估.经过计算,模型误差和验证误差分别为0.47 psu和0.45 psu,而相应的SMOS Level 2产品的精度分别为1.90 psu和1.82 psu.此模型为海表面盐度的计算提供了一个新方法.     

Copper Speciation in a Collection of Geochemical Reference Materials Using Sequential Extraction and Evaluation of the Validity Using XANES Spectroscopy

Copper speciation in a collection of Japanese geochemical reference materials (JSO‐1, JLk‐1, JSd‐1, ‐2, ‐3 and ‐4, JMs‐1 and JMs‐2) was achieved by sequential extraction and characterised using X‐ray absorption near‐edge structure spectroscopy. In the first step of the extraction, referred to as the acid fraction, between 1% and 20% total Cu within the reference materials was extracted. Such a result is typically accounted for by absorption of Cu onto clay minerals. However, the presence of Cu sulfate (an oxidation product of chalcopyrite) was observed in some of the stream sediments affected by mining activity (JSd‐2 and JSd‐3) instead. Copper was extracted in the reducible fraction (targeting Fe hydroxide and Mn oxide) (2–49% total Cu). Between 2% and 51% Cu was extracted in the oxidised fraction (targeting sulfides and organic matter). X‐ray absorption near‐edge structure spectroscopy clarified that the reducible fraction consisted of Cu bound to Fe hydroxide, whereas the oxidised fraction was a mixture of Cu bound to humic acid (HA) and Cu sulfide. In the oxidisable fraction, chalcopyrite was the predominant species identified in JSd‐2, and Cu bound to HA was the major species identified in JSO‐1 (a soil sample).     

An Alternative Protocol for Single Zircon Dissolution with Application to (U‐Th‐Sm)/He Thermochronometry

Zircon (U‐Th‐Sm)/He (ZHe) thermochronometry is a powerful tool that has been widely used in geology to constrain the exhumation histories of orogens. In this study, we present an alternative protocol for dissolving zircon grains for determination of parent nuclides. This new alkali fusion procedure developed at the SARM (Service d'Analyse des Roches et des Minéraux) in Nancy, France, is fast (requiring only 2 d, including cleaning steps) and offers several advantages over conventional methods by avoiding: (i) use of HF pressure dissolution and (ii) complete removing of grains from the metal microvials. After dissolution, U, Th and Sm were measured using an ICP‐MS. We tested the new procedure on two different ZHe reference materials, the Fish Canyon Tuff and Buluk Tuff; these provided precision values for ZHe‐age estimations of 9 and 6% (1s), respectively. In addition, using this method, zircons from the Buluk Tuff are shown to be chemically more homogenous and more suitable for assessing the uncertainty of the entire integrated procedure.     

Community‐Derived Standards for LA‐ICP‐MS U‐(Th‐)Pb Geochronology – Uncertainty Propagation,Age Interpretation and Data Reporting

The LA‐ICP‐MS U‐(Th‐)Pb geochronology international community has defined new standards for the determination of U‐(Th‐)Pb ages. A new workflow defines the appropriate propagation of uncertainties for these data, identifying random and systematic components. Only data with uncertainties relating to random error should be used in weighted mean calculations of population ages; uncertainty components for systematic errors are propagated after this stage, preventing their erroneous reduction. Following this improved uncertainty propagation protocol, data can be compared at different uncertainty levels to better resolve age differences. New reference values for commonly used zircon, monazite and titanite reference materials are defined (based on ID‐TIMS) after removing corrections for common lead and the effects of excess ²³⁰Th. These values more accurately reflect the material sampled during the determination of calibration factors by LA‐ICP‐MS analysis. Recommendations are made to graphically represent data only with uncertainty ellipses at 2s and to submit or cite validation data with sample data when submitting data for publication. New data‐reporting standards are defined to help improve the peer‐review process. With these improvements, LA‐ICP‐MS U‐(Th‐)Pb data can be considered more robust, accurate, better documented and quantified, directly contributing to their improved scientific interpretation.     

A new assessment model for evacuation vulnerability in urban areas

In the high-speed urbanization process of China, the urban population has been increasing significantly, leading to a high-density aggregation of population. However, the sharp increase in population density has not produced commensurate improvements in the road networks. On the contrary, the population increase induced a serious evacuation vulnerability, which cities experience during various hazards and catastrophic events. Therefore, research on evacuation vulnerability is important to urban planning. To assess the evacuation vulnerability, the optimal and worst scenarios should be considered because all possible evacuation plans occur between these extremes. However, most previous evacuation vulnerability studies are based on the worst-case scenario, only providing an upper bound of a potential evacuation assessment. To provide a more comprehensive theoretical basis for decision-makers to understand the consequences caused by all possible evacuations, this paper proposes an optimal evacuation vulnerability assessment model that provides the lower bound on potential evacuation difficulties. The model is solved by a stepwise spreading algorithm based on Graph Theory. Subsequently, to evaluate the effectiveness of the model, the study adopts the model to assess the evacuation capability of different road network topologies. A comparison with previous research was performed. The model was demonstrated in an application to the South Luogu Alley of Beijing, China. The significance of this paper is that the combination of our model with previous research may provide a more complete theoretical basis for an evacuation vulnerability assessment.