徕卡RTC360三维激光扫描仪在竣工测量中的应用

徕卡RTC360不仅操作简单、扫描速度快，而且非常智能。可以实时跟踪计算两个连续站点间的相对位置，点云实时预拼接。后期搭配Register360智能拼接软件，点云智能拼接处理，无需人工干预，简单高效。     

利用GLAS激光测高数据评估DSM产品质量及精度优化

提出了一种利用卫星激光测高数据直接优化提升数字表面模型（DSM）产品精度的方法。选取境外中亚地区的资源三号DSM开展试验，通过采用多准则约束方法提取激光高程控制点，分别利用偏度、中值、线性、二次多项式等进行DSM误差修正，发现4种模型均能有效消除DSM系统误差，其中基于二次多项式的方法更适用于平地和丘陵地貌，线性模型更适用于高山地貌。试验验证了采用卫星激光测高数据优化境外DSM技术流程的可行性，最终可提高DSM的绝对高程精度。     

一种利用浮标站资料改进海浪模式有效波高预报的方法

基于浮标站海浪历史数据,利用回归分析方法建立了海浪数值模式有效波高预报产品的一元二次回归方程订正统计模型。通过2017年7月1日-2018年10月10日期间业务试运行结果发现:订正方程能有效改善有效波高数值预报产品的预报精度,且预报时效越短订正效果越显著。其中,第6~11 h预报时效内的订正前后平均绝对误差值减小0.17~0. 241 m,第6~18 h预报时效内订正前后均方根误差减小幅度为0.103~0. 28 m。这说明应用订正统计模型对海浪模式输出产品进行订正,也是改进海浪模式预报准确率的一种有效途径。     

基于GridMet模型的浙江省温湿指数空间分布及地形影响分析

温湿指数是气候舒适度评价模型之一,通过温度与湿度的组合反映人体与周围环境的热量交换,本文利用2003-2018年浙江省及其周边71个气象站点月平均气温、地面水汽压数据,以及MODIS水汽产品,基于GridMet模型模拟了浙江省各月温湿指数空间分布（100 m×100 m）,分析了浙江省温湿指数随地形因子（海拔、坡度、坡向）变化的特征;讨论了各地形因子对温湿指数空间分布的影响程度。结果表明：① 海拔、坡度、坡向3个地形因子中,1月温湿指数随坡向的变化最大,7月最小;② 同坡向上,坡度变化对1月温湿指数影响较大,而海拔变化则是对7月影响最大;③ 南坡1月温湿指数随海拔和坡度增加均略为增加,南坡其他月份及北坡各月均为随海拔和坡度增加温湿指数减小;④ 北坡相对于南坡而言,海拔和坡度对温湿指数的影响更为明显。浙江大部分山区由于地形影响,夏季较为“舒适”,适宜建立避暑消夏的旅游项目。     

对流层延迟与可降水量直接转换模型研究

采用线性回归和最小二乘法拟合建立无线电探空可降水量（RS-PWV）与GPS对流层延迟（GPS-ZTD）、地面温度及大气压之间的直接转换模型，并将直接转换模型得到的PWV分别与RS-PWV及GPS反演得到的可降水量（GPS-PWV）进行比较。结果表明，RS-PWV与GPS-ZTD之间存在良好的线性关系，相关系数达0.927 6；RS-PWV与4阶拟合温度和大气压呈现较好的相关性，相关系数分别为0.640 1和－0.626 3；基于ZTD的单阶单因子模型PWV与GPS-PWV的相关系数达到0.969 9；基于ZTD、温度及大气压的单阶多因子模型PWV比基于ZTD的单阶单因子模型PWV精度明显提高，RMS从4.3 mm提高到3.3 mm。     

利用基于环境因子的动态产量模型评估西南大西洋阿根廷滑柔鱼

西南大西洋阿根廷滑柔鱼，Illex argentinus，巴塔哥尼亚南部群体是重要的经济种类。海洋环境因子在柔鱼资源分布中起着重要的作用。本研究利用基于环境因子的动态产量模型评估2000-2010年的滑柔鱼的资源量。假设海洋环境因子（滑柔鱼产卵场最适宜海表温度占比）影响动态产量模型的参数K，DIC值表明在正态分布和均匀分布下均是基于环境因子的评估模型优于基本的动态产量模型。阿根廷滑柔鱼的最大可持续产量（MSY）在351600吨到685 100吨之间，资源生物量在1322400吨到1 803 000吨之间，其捕捞死亡系数均小于F_0.1和F_MSY，资源处在良好状态，没有遭受过度捕捞。本研究为应用环境因子在柔鱼类的资源评估与管理提中供了科学的参考方法。     

A GLUE‐based uncertainty assessment framework for tritium‐inferred transit time estimations under baseflow conditions

The last decade has seen major technical and scientific improvements in the study of water transfer time through catchments. Nevertheless, it has been argued that most of these developments used conservative tracers that may disregard the oldest component of water transfer, which often has transit times greater than 5 years. Indeed, although the analytical reproducibility of tracers limits the detection of the older flow components associated with the most dampened seasonal fluctuations, this is very rarely taken into account in modelling applications. Tritium is the only environmental tracer at hand to investigate transfer times in the 5‐ to 50‐year range in surface waters, as dissolved gases are not suitable due to the degassing process. Water dating with tritium has often been difficult because of the complex history of its atmospheric concentration, but its current stabilization together with recent analytical improvements open promising perspectives. In this context, the innovative contribution of this study lies in the development of a generalized likelihood uncertainty estimation‐based approach for analysing the uncertainties associated with the modelling of transit time due to both parameter identification and tracer analytical precision issues. A coupled resampling procedure allows assessment of the statistical significance of the transfer time differences found in diverse waters. This approach was developed for tritium and the exponential‐piston model but can be implemented for virtually any tracer and model. Stream baseflow, spring and shallow aquifer waters from the Vallcebre research catchments, analysed for tritium in different years with different analytical precisions, were investigated by using this approach and taking into account other sources of uncertainty. The results showed three groups of waters of different mean transit times, with all the stream baseflow and spring waters older than the 5‐year threshold needing tritium. Low sensitivity of the results to the model structure was also demonstrated. Dual solutions were found for the waters sampled in 2013, but these results may be disambiguated when additional analyses will be made in a few years. Copyright © 2016 John Wiley & Sons, Ltd.     

Investigation of the elevation of saltwater wedge due to subsurface dams

Subsurface dams are rather effective and used for the prevention of saltwater intrusion in coastal regions around the world. We carried out the laboratory experiments to investigate the elevation of saltwater wedge after the construction of subsurface dams. The elevation of saltwater wedge refers to the upward movement of the downstream saltwater wedge because the subsurface dams obstruct the regional groundwater flow and reduce the freshwater discharge. Consequently, the saltwater wedge cannot further extend in the longitudinal direction but rises in the vertical profile resulting in significant downstream aquifer salinization. In order to quantitatively address this issue, field-scale numerical simulations were conducted to explore the influence of various dam heights, distances, and hydraulic gradients on the elevation of saltwater wedge. Our investigation shows that the upward movement of the saltwater wedge and its areal extension in the vertical domain of the downstream aquifer become more severe with a higher dam and performed a great dependence on the freshwater discharge. Furthermore, the increase of the hydraulic gradient and the dam distance from the sea boundary leads to a more pronounced wedge elevation. This phenomenon comes from the variation of the freshwater discharge due to the modification of dam height, location, and hydraulic gradient. Large freshwater discharge can generate greater repulsive force to restrain the elevation of saltwater wedge. These conclusions provide theoretical references for the behaviour of the freshwater–seawater interface after the construction of subsurface dams and help optimize the design strategy to better utilize the coastal groundwater resources.     

基于像元二分模型的地表植被覆盖度估算模块化设计与实现

地表植被覆盖度是的一种应用广泛的定量遥感产品,在水文、生态、区域变化等方面都具有重要的意义。像元二分模型是应用最多的一种遥感估算地表覆盖度的方法。目前,用遥感的方法进行地表植被覆盖度估算没有完整、系统的工具,用户只能逐步进行操作,效率低下,鉴于上述情况,本文运用IDL交互式数据语言,基于ENVI二次开发了一个植被覆盖度估算程序,取得了一定的成效,对遥感定量产品的生产、应用具有一定意义。     

不动产大数据在城市更新潜力空间评估中的应用

我国在发展新常态与城市精细化治理背景下，对城市更新精准施策与量化评估提出了更高的要求。城市更新过程与人、地、房的相互作用紧密相关。不动产登记数据包含丰富的人、地、房空间属性信息，能够在城市的建成环境评估过程中发挥重要作用，现有城市更新评估模型几乎均未使用这一数据支持。本文从大数据量化评估视角出发，在文献研究的基础上，利用不动产登记大数据构建城市更新潜力评估体系，建立评估方法，并以南京市为应用案例，在街道（乡、镇）尺度上，对评估对象区域进行城市更新潜力的量化评估，实现精细化尺度的空间分析，辅助城市更新方向与选址，引导精准施策。