电感耦合等离子体质谱法同时测定地质样品中痕量碘溴硒砷的研究：Ⅱ.土壤及沉积物标准物质分析

样品用碳酸钠和氧化锌混合熔剂半熔，热水提取，然后用强酸性阳离子交换树脂将阴离子形式存在的分析元素与溶液中大量钠、锌等阳离子分离，采用电感耦合等离子体质谱法直接同时测定溶液中的碘、溴、硒、砷。用0.07mol/L的氨水溶液清洗进样系统，有效减少了碘等元素的记忆效应和清洗时间。方法检出限（10σ，DF=100）溴、碘分别为0.15和0.028μg/g，砷、硒分别为0.04和0.004μg/g。用土壤和沉积物等地质标准物质分析验证了方法的准确度和精密度，绝大多数分析结果在标准值的允许误差范围之内。样品10次测定的RSD为0.8%～2.8%。     

岩矿中稀土元素离子交换分离富集的改进及ICP—AES测定

本文通过对离子交换柱的规格改进,提高了分离效率,加快了分离速度(流速v/(ml·min~(-1)))可达1.0—1.5.结合分离富集条件的选择及ICP-AES测定方法的联用,使本法不分析周期短、所耗试剂省,且检测限低、精密度和准确度较高.经标样检验和矿样实测对比,其结果均令人满意.     

743离子交换快速分离—等离子体光谱法同时测定十五个稀土元素

本文研制了适用于地质样品中15个稀土元素分析的快速方法。样品经碱熔沉淀分离和743阳离子交换树脂分离富集将稀土元素制备成溶液用等离子体光谱法(ICP-AES)进行测量。方法检出限为0.002-0.3μg/g,当稀土元素含量为0.5-80,μg/g时,方法相对标准偏差为15％-2％。本方法经过多年的样品分析考验以及不断的改进和完善,证明方法简便快速,分析数据稳定可靠,能很好地满足地质样品中15个稀土分量测定的要求。     

Analytical perspective on trace element species of interest in exploration

Analysis of soil and sediment samples, using selective extraction methods to distinguish different phases, is of particular interest in exploration geochemistry to locate deeply buried mineral deposits. There are various mechanisms of binding labile elements in the secondary environment, including physical and chemical sorption, precipitation, chelation and complexation. Phases present in soils and sediments which are likely to scavenge ‘free' elements include amorphous Mn and Fe oxides, the humic and fulvic components of humus, and clays. This paper reviews these forms of trace elements and the methods in current use to quantify them. Examples of precision data, both for control and survey samples, are given with respect to trace elements dissolved from the ‘soluble organic' component of humus, Mn oxides and amorphous Fe oxides. The high sensitivity of inductively coupled plasma mass spectrometry (ICP–MS) is required to measure accurately and precisely a large suite of trace elements, especially where only small fractions of elements are dissolved by such leaches as the commercially available Enzyme and MMI (Mobile Metal Ion) extractions. The relative standard deviations (RSD) obtained for 33 elements (e.g. Ag, Cd, In, I) in the standard reference sample (SRM), TILL-2, are in the range 0.5–8% for the hydroxylamine hydrochloride (NH₂OH·HCl) leach designed to extract hydrous Fe and Mn oxides. The corresponding RSDs for elements in the reactive Mn oxide phase extracted by the Enzyme leach are in the range 3–19% except for some trace elements at levels close to detection limit (e.g. Cd, Bi). The RSDs obtained for field duplicates are inferior to those for analytical replicates (i.e. sample splits), probably a reflection of different concentrations of the host phase. In one soil survey, the Fe extracted by a 0.25 M NH₂OH·HCl leach ranged conservatively from 0.2 to 1.7% whereas the Mn extracted by the Enzyme leach varied extensively, from 0.3 to >999 ppm. In contrast, precision, at 1–7% RSD, for field duplicates was found to be comparable with that for both analytical duplicates and the SRM, LKSD-4, for elements associated with the humic and fulvic component of humus samples sieved to <177 μm.     

利用MPI实现多幅点云ICP并行配准

迭代最近点算法（ICP）是一种用于点云精确配准的经典算法。针对多幅点云进行ICP配准存在耗时多、效率低的问题,本文利用消息传递接口MPI对多幅点云进行分批并行配准。首先并行求解相邻两幅点云的相邻变换矩阵,然后计算每幅点云在当前批次的局部变换矩阵,最后获得每幅点云的全局变换矩阵。本文以DELL PowerEdge R730服务器为计算平台,对空间点总规模达四千多万的65幅点云进行了分批并行配准。试验结果表明：利用MPI对多幅点云进行分批处理可显著加快配准速度,最优进程数为计算机的核数时,加速比为5.3。     

Chronology, Geochemistry and Tectonic Settings of the Hadamiao Granodiorite on the Northern Margin of the North China Platform

<正>The Hadamiao granodiorite,located on the northern margin of the North China platform and acting as the country rock of gold deposits in the Hadamiao region,was formed in the same age and similar tectonic settings with the Hadamiao gold deposit and the large-scale Bilihe gold deposit in the same area.By using the LA-ICP-MS method,the U-Pb age obtained is 267±1.3 Ma,which represents the crystallized age of the granodiorite,and that of the xenolithic zircon is 442.8±5 Ma. Base on the main elements,it exhibits the features of calc-alkaline to high-potassium calc-alkaline series,low silicon,and quasi-aluminous I-type granites,and with high magnesium(Mg~#=0.45-0.57) and high sodium contents(Na_2O/K_2O=0.98-2.29).The SREE values(81.6-110.15 ppm) are relatively low,the fractionations between LREE and HREE are obvious,showing a right-inclined dispersion in the REE distribution diagram.Compared with the primitive mantle,the rock is relatively rich in LREE(La and Ce),LILE(K,Sr,and Th),and intensively depleted in HFSE(Ti,P,Nb and Ta).The ratios of Sr/Y and(La/Yb)_N and the contents of Rb,Nb and Y are relatively low,the Sr values are high (436.35-567.26 ppm),and the Yb contents of most samples are low(1.25-1.8),which indicate the features of typical continental margin arc and adakitic rocks.According to the values ofε_(Nd)(t)(-2.4 to +0.2) and I_(Sr)(0.7028-0.7083),and variations of the La/Sm ratios,the Hadamiao granodiorite was formed from mixing of the thickened molten lower crust and the mantle wedge substances.The rock was related to the southward subduction and accretion of the Paleo-Asia Ocean in the Late Paleozoic, being Late Paleozoic magma of the continental margin arc formed on the basement of the Early Paleozoic accretion complexes,and showing a trend of turning into adakitic rocks,which indicates their great metallogenic(Au) potential.     

Calcium,Na, K and Mg Concentrations in Seawater by Inductively Coupled Plasma‐Atomic Emission Spectrometry: Applications to IAPSO Seawater Reference Material,Hydrothermal Fluids and Synthetic Seawater Solutions

We report a measurement procedure to determine simultaneously the major cation concentrations (Na, Ca, K and Mg) of seawater‐derived solutions by inductively coupled plasma‐atomic emission spectrometry. The best results were obtained when the IAPSO (‘standard’) seawater reference material was diluted by thirty times with Milli‐Q^® water. We obtained an average reference value r_K (the ratio of the mass fraction of potassium to that of chlorine, i.e., (g kg^?1)/(g kg^?1)) for IAPSO seawater of 0.0205 ± 0.0006 (2.9% RSD), not significantly different from 0.0206 ± 0.0005 (2.4% RSD) for seawater composition reported in the literature. The measured Na, Ca and Mg concentrations correspond to r_Na, r_Ca and r_Mg values of 0.5406 ± 0.0026 (0.5% RSD), 0.02192 ± 0.00048 (2.2% RSD) and 0.06830 ± 0.00047 (0.7% RSD), respectively, in line with previous values measured by wet‐chemistry and atomic absorption spectrophotometry or wet‐chemical titration. Our measurement procedure was used successfully on synthetic seawater solutions and high‐temperature hydrothermal fluids.     

Sulfur Concentration in Geochemical Reference Materials by Solution Inductively Coupled Plasma‐Mass Spectrometry

With implications for the origin of ore deposits, redox state of the atmosphere, and effects of volcanic outgassing, understanding the sulfur cycle is vital to our investigation of Earth processes. However, the paucity of sulfur concentration measurements in silicate rocks and the lack of well‐calibrated reference materials with concentrations relevant to the rocks of interest have hindered such investigations. To aid in this endeavour, this study details a new method to determine sulfur concentration via high mass resolution solution inductively coupled plasma‐mass spectrometry (ICP‐MS). The method is based on an aqua regia leach, involving relatively rapid sample preparation and analysis, and uses small test portion masses (< 50 mg). We utilised two independently prepared standard solutions to calibrate the analyses, resulting in 4% accuracy, and applied the method to eight geochemical reference materials. Measurements were reproducible to within ~ 10%. Sulfur concentrations and isotopes of six reference materials were measured additionally by elemental analyser‐combustion‐isotope ratio mass spectrometry to independently evaluate the accuracy of the ICP‐MS method. Reference materials that yielded reproducible measurements identical to published values from other laboratories (JGb‐1, JGb‐2 and MAG‐1) are considered useful materials for the measurement of sulfur. Reference materials that varied between studies but were reproducible for a given test portion perhaps suffer from sample heterogeneity and are not recommended as sulfur reference materials.     

LA‐ICP‐MS Analysis of Small Samples: Carbonate Reference Materials and Larval Fish Otoliths

This article proposes a methodology to analyse the composition of very small carbonate samples such as larval fish otoliths. The chemical composition of otoliths, which are carbonate structures in the inner ear, is often used to explore population dynamics in fishes. Recent advances in laser ablation‐inductively coupled plasma‐mass spectrometry have suggested its potential application to this field. In this study, analyses were performed using a 193 nm ArF Resonetics LA system, coupled to an Agilent 7700X‐ICP‐MS, with the following ablation parameters: a beam diameter of 5 μm, energy of 3 mJ, 2.7 J cm^?2, laser repetition rate of 10 Hz and translation speed of 2.5 μm s^?1. NIST SRM 610 glass was used as the primary calibration material. Performing this protocol, characterisation of a USGS GP‐4 reference material was achieved with suitable precision and accuracy, but the USGS MACS‐3 reference material appeared more heterogeneous under the ablation conditions tested. Calibration was performed using two different beam diameters (5 and 11 μm). Capelin (Mallotus villosus) otoliths measuring between 10 and 20 μm in diameter were tested. Even though a smaller beam diameter and lower energy were used compared with those normally employed to analyse larger otoliths, the method was successful.     

Precise and Accurate In Situ Determination of Lead Isotope Ratios in NIST,USGS, MPI‐DING and CGSG Glass Reference Materials using Femtosecond Laser Ablation MC‐ICP‐MS

Lead isotope ratio data were obtained with good precision and accuracy using a 266 nm femtosecond laser ablation (fLA) system connected to a multi‐collector ICP‐MS (MC‐ICP‐MS) and through careful control of analytical procedures. The mass fractionation coefficient induced by 266 nm femtosecond laser ablation was approximately 28% lower than that by 193 nm excimer laser ablation (eLA) with helium carrier gas. The exponential law correction method for Tl normalisation with optimum adjusted Tl ratio was utilised to obtain Pb isotopic data with good precision and accuracy. The Pb isotopic ratios of the glass reference materials NIST SRM 610, 612, 614; USGS BHVO‐2G, BCR‐2G, GSD‐1G, BIR‐1G; and MPI‐DING GOR132‐G, KL2‐G, T1‐G, StHs60/80‐G, ATHO‐G and ML3B‐G were determined using fLA‐MC‐ICP‐MS. The measured Pb isotopic ratios were in good agreement with the reference or published values within 2s measurement uncertainties. We also present the first high‐precision Pb isotopic data for GSE‐1G, GSC‐1G, GSA‐1G and CGSG‐1, CGSG‐2, CGSG‐4 and CGSG‐5 glass reference materials obtained using the femtosecond laser ablation MC‐ICP‐MS analysis technique.