Research on Horizontal Vibration of Heavy-Weight Drill Pipes in Directional Drilling

The mode of load and deformation of directional drilling string and the expression of trigonometric series of deflection equation are established by means of elastic deformation energy and of the vertical and horizontal bending. A calculation formula for natural frequency of horizontal resonance and rotational speed is derived based on the calculation method by Ritz, with which analysis is made for the cause and affecting factors of the excessive abrasion of heavy-weight drill pipe in high-angle holes so as to provide reference and basis for rational selection of drilling parameters and drilling tools in the future high-angle directional drilling.     

Buckling Propagation in Marine Pipelines

The buckling propagation in marine pipelines is studied by means of the cylindrical shell model in this paper. Several parameters including geometrical parameter D/ T, L/ D, physical parameter E and σy are discussed. The computed results are compared with the available experimental data and other computed results, it is found that the present results are closer to the experimental results than other computed results.     

A Study on Crack Detection with Modal Parameters of A Jacket Platform

Crack detection procedures by different modal parameters are analyzed for identitying a crack and its location and magnitude in a jacket plafform. The first ten natural frequencies and modal shapes of the jacket models are obtained by numerical experiments based on NASTRAN Code. A crack at different locations and of different magnitudes is imposed in the model at the underwater beams. Then, the modal evaluation parameters are calculated numerically, to illustrate the evaluation of modal parameter criteria used in jacket crack detection. The sensitivities of different modal parameters to different cracks are analyzed. A new technique is presented for predicting the approximate location of a breakage in the absence of the data of an intact model. This method can be used to detect a crack in underwater menbers by use of incomplete mode shapes of the top members of the jacket.     

Underwater Explosion Treatment of Marine Soft Foundation

The consolidation of soft foundation is a problem that commonly appears in harbor construction engineering on muddy coast. Introduced in this paper is the experimental study on underwater explosion treatment of soft foundation, including the regulations of explosion hollow development and medium movement, the law of similarity of densification and settlement of filled stone mass by shock wave pressure and explosion energy and their construction technologies, etc. A number of projects have been completed by applying this new technique, and the technique itself has been proved practicable.     

Safety Level and Reliability Index for Bank Slope Stability

Based on statistics and analysis of the safety factor of unstable bank slopes,the relation be-tween safety level and reliability index of stability is studied and discussed,and then the elementary cali-brating calculation is carried out to the levels of safety and reliability for bank slope stability in the rangeof safety factors stipulated in existing China Technical Specifications for Port Engineering—FoundationPart(1987)and to those reached by some stable bank slopes already built.The results show that the relia-bility index β in the effective stress method is able to reach a high value of 2.4～4.1(mid-value 3.25),while the value of β in other three kinds of total stress method can just reach a lower value of 0.5～2.8(mid-value 1.65),which are in conformity with the engineering experience in China,and thus acceptable.Some suggestions are also given in this paper to the adoption of the value of β_0—objective reliability indexfor bank slope stability.     

Water Wave Refraction and Diffraction over Frictional Topography

- This paper considers the effects of wave energy dissipation induced by sea-bottom friction on the computational results of water wave refraction and diffraction with the parabolic equation method. The presented results show that the friction factor formula adopted in this paper is of higher numerical accuracy than that introduced by Dalrymphe (1984), and it can be used to compute wave propagation over large open areas.     

Nonlinear Analysis of Nearshore Wave Height Variation Due to Shoaling

Wave formulae derived from the dispersion relation for cnoidal waves are used to find an analytical solution to the problem of nearshore wave height variation on a simple topography, i. e., with an incrementally constant slope. The solution accounts for shoaling, frictional dissipation and will be sufficiently accurate for practical purposes considering the simplified assumptions which are necessary for the treatment of this problem by any method.     

Coupled BEM-FEM Analysis of the Large-Diameter Cylinder Structure System

A method of coupled BEM-FEM analysis for the elastic spatial structure system is presented. It can be applied to the calculation of the stress and deformation of the large-diamater cylinder structure system and it is suitable for symmetric or non-symmetric structures under the distributed or concentrated load. Numerical examples show that the proposed method and computer program BEFEM are quite efficient in the analysis of the large-diameter cylinder structure problems in ocean engineering.     

Method to Determine Depositional Range of Sediment Transported from Multiple Sources in Water Area

- The sediment from different sources have different content of the characteristic elements. According to the fuzzy mathematical theory, corresponding calculation and cluster analysis of each sediment sample are carried out, so the main courses of sediment transport in water area can be obtained. The characteristics of sediment from different sources are analysed. It is found that the sediment deposited of certain point in water area is due to the sources' contributions which can be calculated by the formula derived in this paper. Based on the distribution of the contribution values, the depositional range of sediment from each source can be determined. The depositional range in Huangmao Bay is determined as an example.