Pyroxenes in the system Mg2Si2O6-CaMgSi2O6 at high pressure

The enstatite-diopside solvus in the system Mg₂Si₂O₆-CaMgSi₂O₆ has been experimentally determined within the pressure range 5–40 kbars and the temperature range 900–1500°C. Experiments involving reversal of the phase boundaries by unmixing from glass starting material and by reaction of pure clinoenstatite and diopside showed difficulty in achieving equilibration due to persistence of metastable, subcalcic clinopyroxene and to the sluggishness of reaction rate. The experimental data showed that the temperature dependence of the diopside limb is less than previously accepted. At 1500°C and 30 kbars subcalcic diopside found by Davis and Boyd (1966) is shown to be metastable with respect to enstatite and more calcic diopside of composition En_42.3Di_57.7. The solvus widens with increasing pressure between 5 and 40 kbars at 1200°C, but at 900°C the pressure effect on the solvus is very small. The stability relationships of the four pyroxenes, protoenstatite, enstatite, iron-free pigeonite and diopside are summarized, based on data from the literature and the present study.     

Multi-functional heat pulse probe measurements of coupled vadose zone flow and transport

Simultaneous measurement of coupled water, heat, and solute transport in unsaturated porous media is made possible with the multi-functional heat pulse probe (MFHPP). The probe combines a heat pulse technique for estimating soil heat properties, water flux, and water content with a Wenner array measurement of bulk soil electrical conductivity (EC_bulk). To evaluate the MFHPP, we conducted controlled steady-state flow experiments in a sand column for a wide range of water saturations, flow velocities, and solute concentrations. Flow and transport processes were monitored continuously using the MFHPP. Experimental data were analyzed by inverse modeling of simultaneous water, heat, and solute transport using an adapted HYDRUS-2D model. Various optimization scenarios yielded simultaneous estimation of thermal, solute, and hydraulic parameters and variables, including thermal conductivity, volumetric water content, water flux, and thermal and solute dispersivities. We conclude that the MFHPP holds great promise as an excellent instrument for the continuous monitoring and characterization of the vadose zone.     

Effective porosity and specific yield of a sedimentary rock determined by a field tracing test using tritium as a tracer

Effective porosity value was analyzed from the tritium concentration of sampled groundwater using a three-dimensional groundwater-flow and advection-dispersion code based on the finite element method. The effective porosity value was about 10%. Porosity values measured from core samples were 7–15%. The groundwater flow velocity estimated from the tritium concentrations was about 1 × 10^–5 cm s^–1. Therefore, during the low groundwater flow velocity condition, effective porosity and porosity values were the same. At the same test site, a 0.48% effective porosity value, determined by another tracer test injecting Br^– solution into the aquifer during groundwater level change, was smaller than the porosity value when the flow velocity was 1.8×10^–2 cm s^–1. Thus the effective porosity value is concluded to be due to groundwater flow velocity. The specific yield value was calculated to be 0.6% by the total volume of tunnel seepage water and the total volume of the rock unsaturated during tunnel construction. However, as pore water continued to be drained after the groundwater level change was completed, the specific yield value became larger than 0.6%. Thus specific yield value is concluded to be due to drainage time.     

Soil H<Subscript>2</Subscript> and CO<Subscript>2</Subscript> Surveys at Several Active Faults in Japan

Soil H₂ and CO₂ surveys were carried out along seven active faults and around the aftershock region of the 2000 Tottori-ken Seibu earthquake in Japan. Diffuse CO₂ effluxes were also measured along one fault and around the 2000 aftershock region. The results show highly variable H₂ concentration in space and time and it seems that the maximum H₂ concentration at each active fault correlates with fault activity as exemplified by the time of the latest big earthquakes. Even though observed H₂ concentrations in four faults were markedly lower than those collected previously in the latter half of the 1970s, it is evident that the higher H₂ concentrations in this study are due to the addition of the fault gases. Comparing the chemical composition of trapped gases (H₂: 5–20% and CO₂/H₂: 0.5–12) in fractured rocks of drill cores bored at the Nojima fault, a soil gas sample with the highest H₂ concentration showed large amounts of the trapped fault gas, diluted with atmospheric component. The profile experiment across a fracture zone at the Yamasaki fault showed higher H₂ concentrations and lower CO₂/H₂ ratios as was observed in soil gas from the fracture zone. A few days after the 2000 Tottori-kei Seibu earthquake, no CO₂ effluxes related to the occurrence of earthquakes were observed at the aftershock region. However, only above the epicenter zone, relatively high H₂ concentrations in soil gases were observed.     

Mineralogy of new Antarctic achondrites with affinity to Lodran and a model of their evolution in an asteroid

Abstract— We studied five new Antarctic achondrites, MacAlpine Hills (MAC) 88177, Yamato (Y)74357, Y75274, Y791491 and Elephant Moraine (EET)84302 by mineralogical techniques to gain a better understanding of the mineral assemblages of a group of meteorites with an affinity to Lodran (stony-iron meteorite) and their formation processes. This group is being called lodranites. These meteorites contain major coarse-grained orthopyroxene (Opx) and olivine as in Lodran and variable amounts of FeNi metal and troilite etc. MAC88177 has more augite and less FeNi than Lodran; Y74357 has more olivine and contains minor augite; Y791491 contains in addition plagioclase. EET84302 has an Acapulco-like chondritic mineral assembladge and is enriched in FeNi metal and plagioclase, but one part is enriched in Opx and chromite. The EET84302 and MAC88177 Opx crystals have dusty cores as in Acapulco. EET84302 and Y75274 are more Mg-rich than other members of the lodranite group, and Y74357 is intermediate. Since these meteorites all have coarse-grained textures, similar major mineral assemblages, variable amounts of augite, plagioclase, FeNi metal, chromite and olivine, we suggest that they are related and are linked to a parent body with modified chondritic compositions. The variability of the abundances of these minerals are in line with a proposed model of the surface mineral assemblages of the S asteroids. The mineral assemblages can best be explained by differing degrees of loss or movements of lower temperature partial melts and recrystallization, and reduction. A portion of EET84302 rich in metal and plagioclase may represent a type of component removed from the lodranite group meteorites. Y791058 and Caddo County, which were studied for comparison, are plagioclase-rich silicate inclusions in IAB iron meteorites and may have been derived by a similar process but in a different body.     

The optical reflector system for the CANGAROO-II imaging atmospheric Cherenkov telescope

A new imaging atmospheric Cherenkov telescope with a light-weight reflector has been constructed. Light, robust, and durable mirror facets of containing carbon fiber reinforced plastic laminates were developed for the telescope. The reflector has a parabolic shape (f/1.1) with a 30 m² surface area, which consists of 60 spherical mirror facets. The image size of each mirror facet is 0°.08 (FWHM) on average. The attitude of each facet can be adjusted by stepping motors. After the first in situ adjustment, a point image of about 0°.14 (FWHM) over 3° field of view was obtained. The effect of gravitational load on the optical system was confirmed to be negligible at the focal plane. The telescope has been in operation with an energy threshold for γ-rays of 300 GeV since May 1999.     

A simple DEM assessment procedure for gully system analysis in the Lake Manyara area,northern Tanzania

Gully erosion is a major threat concerning landscape degradation in large areas along the northern Tanzanian Rift valley. It is the dominant erosion process producing large parts of the sediments that are effectively conducted into the river network. The study area is located in the Lake Manyara—Makuyuni River catchment, Arusha, northern Tanzania. During fieldwork, we measured topographic data of eight gully systems close to Makuyuni Town. The main focus of this study is to assess gully erosion dynamics using improved DEMs with original resolutions of 30 and 20 m, respectively. We assessed terrain characteristics to extract information on environmental drivers. To improve the DEM, we integrated information deduced from satellite images as well as from acquired GPS field data. Topographic indices such as Stream Power Index or Transport Capacity Index were derived from the re-interpolated DEM. To evaluate gully evolution, we assessed also the longitudinal slope profiles. Finally, the gully evolution phases of each gully were classified according to the concept proposed by Kosov et al. (Eksperimental’naya geomorfologiya, vol 3. Moscow University, Moskva, pp 113–140, 1978). The re-interpolated DEMs revealed a positive response especially for the more developed gullies. We show that the extraction of information on this spatial process scale based on “low-resolution” data is feasible with little additional fieldwork and image interpretation. In fact, areas identified as having a greater risk of gully erosion have been confirmed by observations and surveys carried out in the field.     

Estimation of property loss and business interruption loss caused by storm surge inundation due to climate change: a case of Typhoon Vera revisit

This paper estimates property loss and business interruption loss under scenarios of storm surge inundation to explore the economic impact of climate change on Ise Bay, Japan. Scenarios-based analyses are conducted with respect to Typhoon Vera, which caused the most severe storm surge in the recorded history of Japan in 1959. Four different hazard scenarios are chosen from a series of typhoon storm surge inundation simulations: Typhoon Vera’s landfall with respect to the condition of the past seawall; Typhoon Vera’s landfall with respect to the condition of the current seawall; intensifying Typhoon Vera, but retaining its original tracks; and intensifying Typhoon Vera, but choosing the worst tracks from various possible typhoon tracks. Our economic loss estimation takes advantage of fine geographical scale census and economic census data that enable us to understand the spatial distribution of property loss and business interruption loss as well as identify the most potentially affected areas and business sectors on a sub-city scale. By comparing the property loss and business interruption loss caused by different hazard scenarios, the effect of different seawalls is evaluated and the economic impact of future climate change is estimated. The results indicate that although the current seawall can considerably reduce the scale of losses, climate change can cause Ise Bay to experience more serious storm surge inundation. Moreover, the resulting economic losses would increase significantly owing to a combination of climate change and the worst track scenario. It is, therefore, necessary to consider more countermeasures to adapt to climate change in this area.