Prediction of Land Subsidence Under Cyclic Pumping Based on Laboratory and Numerical Simulations

In this study subsidence due to groundwater withdrawal was investigated. Kerman Province in Iran is struggling with land subsidence problem due to extensive groundwater withdrawal mainly for farming. The rate and type of groundwater withdrawal has very important impact on settlement rate. In this research, effective parameters on land subsidence caused by groundwater withdrawal were determined by laboratory tests. Sampling had done up to depth of 300 m mainly with remolded specimens from Shams-abad, Nouq plain in Kerman province. Similar to the field preconsolidation pressure was applied on specimens in the laboratory. Rate of applied stress on prepared specimens was similar to effect of oscillation of groundwater level. In order to model the actual soil behavior in the laboratory, one-dimensional consolidation device (odometer) was adopted for testing. In these tests, the effect of loading caused by seasonal oscillation of groundwater table is considered by means of cyclic loading in the testing which has great effect on rate of settlements. The results of tests show that when the water table level periodically increases and decreases the amount of settlement decrease, comparing with the case when the groundwater table drop to a constant level. In order to predict the further effects of groundwater level oscillation and actual field condition on land subsidence, a finite element model based on Biots’ three-dimensional consolidation theory was developed. After calibration of finite element model with laboratory tests, this model was used for prediction the effect of groundwater level oscillation on actual field conditions.     

Geochemical Characteristics,Origin, and Evolution of Ore‐Forming Fluids of the Khut Copper Skarn Deposit,West of Yazd in Central Iran

The Khut copper skarn deposit is located at about 50 km northwest of Taft City in Yazd province in the middle part of the Urumieh‐Dokhtar magmatic arc. Intrusion of granitoid of Oligocene–Miocene age into carbonate rocks of the Triassic Nayband Formation led to the formation of marble and a calcic skarn. The marble contains high grade Cu mineralization that occurs mainly as open space filling and replacement. Cu‐rich sulfide samples from the mineralized marble are also anomalous in Au, Zn, and Pb. In contrast, the calcic skarn is only weakly anomalous in Cu and W. The calcic skarn is divided into garnet skarn and garnet–pyroxene skarn zones. Paragenetic relationships and microthermometric data from fluid inclusions in garnet and calcite indicate that the compositional evolution of skarn minerals occurred in three main stages as follows. (i) The early prograde stage, which is characterized by Mg‐rich hedenbergite (Hd_53.7Di_42.3–Hd_86.1Di_9.5) with Al‐bearing andradite (69.8–99.5 mol% andradite). The temperature in the early prograde skarn varies from 400 to 500°C at 500 bar. (ii) The late prograde stage is manifested by almost pure andradite (96.2–98.4 mol% andradite). Based on the fluid inclusion data from garnet, fluid temperature and salinity in this stage is estimated to vary from 267 to 361°C and from 10.1 to 21.1 wt% NaCl equivalent, respectively. Pyrrhotite precipitation started during this stage. (iii) The retrograde stage occurs in an exoskarn, which consists of an assemblage of ferro‐actinolite, quartz, calcite, epidote, chlorite, sphalerite, pyrite, and chalcopyrite that partially replaces earlier mineral assemblages under hydrostatic conditions during fracturing of the early skarn. Fluids in calcite yielded lower temperatures (T < 260°C) and fluid salinity declined to ～8 wt% NaCl equivalent. The last stage mineralization in the deposit is supergene weathering/alteration represented by the formation of iron hydroxide, Cu‐carbonate, clay minerals, and calcite. Sulfur isotope data of chalcopyrite (δ³⁴S of +1.4 to +5.2‰) show an igneous sulfur source. Mineralogy and mineral compositions of the prograde assemblage of the Khut skarn are consistent with deposition under intermediately oxidized and slightly lower fS₂ conditions at shallow crustal levels compared with those of other typical Fe‐bearing Cu–Au skarn systems.     

Mixed precision parallel preconditioner and linear solver for compositional reservoir simulation

Reservoir simulation role in value creation and strategic management decisions cannot be over emphasized. Simulation of complex challenging reservoirs with millions of grid blocks especially in compositional mode is very time-consuming even with fast modern computers. On the other hand, high price of cluster supercomputers prevents them for being commonly used for fast simulation of such reservoirs. In recent years, the development of many-core processors like cell processors, DSPs, and graphical processing units (GPUs) has provided a very cost-effective hardware platform for fast computational operations. However, programming for such processors is much more difficult than conventional CPUs, and new parallel algorithm design and special parallel implementation methods are needed. Using the computational power of CPUs, GPUs, and/or any other processing unit, Open Computing Language (OpenCL) provides a framework for programming for heterogeneous platforms. In this paper, OpenCL is used to employ the computational power of a GPU to build a preconditioner and solve the linear system arising from compositional formulation of multiphase flow in porous media. The proposed parallel preconditioner is proved to be quite effective, even in heterogeneous porous media. Using data-parallel modules on GPU, the preconditioner/solver runtime reduced at least 1 order of magnitude compared to their serial implementation on CPU.     

Optimal water and waste load allocation in reservoir–river systems: a case study

In this paper, a new methodology is developed for optimization of water and waste load allocation in reservoir–river systems considering the existing uncertainties in reservoir inflow, waste loads and water demands. A stochastic dynamic programming (SDP) model is used to optimize reservoir operation considering the inflow uncertainty, and another model called PSO-SA is developed and linked with the SDP model for optimizing water and waste load allocation in downstream river. In the PSO-SA model, a particle swarm optimization technique with a dynamic penalty function for handling the constraints is used to optimize water and waste load allocation policies. Also, a simulated annealing technique is utilized for determining the upper and lower bounds of constraints and objective function considering the existing uncertainties. As the proposed water and waste load allocation model has a considerable run-time, some powerful soft computing techniques, namely, Regression tree Induction (named M5P), fuzzy K-nearest neighbor, Bayesian network, support vector regression and an adaptive neuro-fuzzy inference system, are trained and validated using the results of the proposed methodology to develop real-time water and waste load allocation rules. To examine the efficiency and applicability of the methodology, it is applied to the Dez reservoir–river system in the south-western part of Iran.     

Shigar valley gemstones,their chemical composition and origin,Skardu, Gilgit-Baltistan,Pakistan

A variety of gemstones is being mined in the Shigar valley, Skardu, Pakistan. These include beryl (goshenite and aquamarine), tourmaline (schorl), garnet (almandine–spessartine), apatite, topaz, fluorite, zoisite, clinozoisite, and axinite, mostly occurring in complex or zoned pegmatites and metamorphic rocks. These have been analyzed using electron probe micro-analyzer and X-ray diffractometer. The mineral chemistry of each gemstone is similar to its respective typical gemstone variety with homogenous chemical composition. Field and chemical characteristics suggest that beryl, tourmaline, garnet, apatite, topaz, and fluorite are occurring in zoned pegmatites which are largely formed by magmatic hydrothermal fluids in the cavities and vugs within the intermediate zone. However, zoisite, clinozoisite, and axinite may have a metamorphic and/or metasomatic origin.     

Interactive effect of nitrogen fertilizer and hydrocarbon pollution on soil biological indicators

The investigation of the impact of different forms of nitrogen fertilizer (NO₃-N and NH₄-N) on microbial parameters, enzyme activities and phytotoxicity in a petroleum-contaminated soil was evaluated by an incubation study. The tested enzymes, microbial activity and seed germination index showed different patterns in response to both petroleum and nitrogen fertilizer addition and time of incubation. The results apparently showed that the contamination of soil with petroleum has a negative effect on soil ecosystem. Nitrogen fertilizer could improve inhibition of petroleum hydrocarbons in soil. Nevertheless, nitrogen fertilizer had no significant effect on urease activity in the petroleum-contaminated soil. As compared to NO₃-N, the addition of NH₄-N to the soil resulted in a greater impact on soil performance as attested by the recovery of the soil germination capability and higher values of the respiration. The application of nitrogen fertilizer may be suggested as a good strategy for restoring soils in regions affected by the same problem.     

Application of artificial intelligence techniques for predicting the flyrock distance caused by blasting operation

Flyrock arising from blasting operations is one of the crucial and complex problems in mining industry and its prediction plays an important role in the minimization of related hazards. In past years, various empirical methods were developed for the prediction of flyrock distance using statistical analysis techniques, which have very low predictive capacity. Artificial intelligence (AI) techniques are now being used as alternate statistical techniques. In this paper, two predictive models were developed by using AI techniques to predict flyrock distance in Sungun copper mine of Iran. One of the models employed artificial neural network (ANN), and another, fuzzy logic. The results showed that both models were useful and efficient whereas the fuzzy model exhibited high performance than ANN model for predicting flyrock distance. The performance of the models showed that the AI is a good tool for minimizing the uncertainties in the blasting operations.     

The Arabian Plate: unique fit of the earth's surface jig saw puzzle

The Arabian Plate is important and unique in many ways. The worker wants to highlight the important features characterizing the Arabian Plate. It is a unique fit of the earth's surface jig saw puzzle, different than all other lithospheric plates. It has the three known main tectonic plate boundaries, divergent, convergent and conservative ones. These boundaries are the Red Sea and Gulf of Aden, Zagros-Taurus and Dead Sea, respectively. It has three main well-defined and sharp plate boundaries, and it is surrounded by three major plates, African, Eurasian and Indian plates. The Red Sea and Gulf of Aden form the divergent boundary and spreading center. The Dead Sea Transform Fault (the Gulf of Aqaba Transform Fault) represents the conservative boundary and transform fault system. The Zagros-Taurus Thrust (Zagros-Taurus-Bitlis Thrust and Fold Belt) represents the convergent boundary and collision zone. The Arabian Plate incorporates a wide range and variety and subvariety of all three rock types, igneous, metamorphic and sedimentary rocks, this in addition to all kinds of structures. Among these are folding with major fold belts, faulting, foliation, lineation and diapirism. Transform, transcurrent, normal, graben, reverse, thrust faults are all represented one way or another. The tectonics of the Arabian shield, which forms a major part of the Arabian Plate, has long tectonic history prior to the formation of the Red Sea. After the opening and formation of the latter, the tectonics of the Arabian shield became affected and controlled by its tectonics. The Arabian Plate includes the Arabian Platform which has a relatively different setting of tectonics represented by the Central Arabian Graben. The Arabian Plate contains one of the best representative outcropped ophiolite sequences in the world. The Arabian Plate most importantly incorporates most of world oil reserve. Seismic and volcanic activities are also manifested and affected many areas in the Arabian Plate.     

Estimation and validation of atmospheric water vapor content using a MODIS NIR band ratio technique based on AIRS water vapor products

Atmospheric water vapor validation needs simultaneous, well-defined, and independent information which are not easily available causing limitations in the development of remote sensing water vapor retrieval algorithms. This study is concerned with the retrieval of total atmospheric water vapor content and its validation. A band ratio method has been used to estimate the water vapor content based on Moderate Resolution Imaging Spectroradiometer (MODIS) Near InfraRed (NIR) data. The method uses MODIS bands 17, 18, and 19 as NIR bands and band 2 to remove the land cover reflectance. Furthermore, the Atmospheric Infrared Sounder (AIRS) has been used for both algorithm development and analysis of the results. The method has been modified to take into account the dry condition of the central parts of Iran. Using some various datasets, the method is implemented and evaluated quantitatively. The validation of the water vapor estimates has been undertaken by an analysis of AIRS data. The validation results shows error as low as 9 % for the estimated water vapor using the MODIS NIR band ratio method.     

Mineral potential mapping for rare earth elements mineralization with AHP method in the Kerman-Kashmar Tectonic Zone,Central Iran

One of the major strengths of a GIS is the ability to integrate and combine multiple layers of geoscience data for producing mineral potential maps showing favorable areas for mineral exploration. Once the data is prepared properly, the GIS, jointly with other statistical and geostatistical software packages, can be used to manipulate and visualize the data in order to produce a mineral prospectivity map. Many spatial modeling techniques can be employed to produce mineral potential maps. This paper demonstrates a technique to define favorable areas for REE mineralization with AHP technique using geological, geochemical, geophysical, alteration and faults density spatial data in the Kerman-Kashmar Tectonic Zone of central Iran. The AHP is a powerful and flexible multi-criteria decision-making tool for dealing with complex problems where both qualitative and quantitative aspects need to be considered. This approach is knowledgedriven method and can be applied in other areas for conventional use in mineral exploration.