M5'模型树算法和无人机航拍影像在震后崩塌滑坡分析中的应用——以鲁甸M_S6.5地震为例

利用高分辨率无人机航拍影像,结合基本地质资料,分析了影响2014年8月3日鲁甸M_S6.5地震震后崩塌滑坡分布的主要因素,使用M5'模型树算法建立了崩塌滑坡密度与其影响因子间的分段线性模型,并检验了该模型的预测性能。结果表明,地震诱发的崩塌滑坡分布受断层距、岩土体结构强度、坡度、植被条件等的影响,其中,断层距、岩土体结构强度及坡度等为主要影响因素;崩塌滑坡易发生在结构破裂区及坡度为38°~50°的区域,其分布密度随断层距的增加而减小;利用M5'模型树算法建立的模型体现出崩塌滑坡分布与其影响因子间复杂的非线性关系,模型检验结果显示,理论模型与实际关联函数间的相关系数达到0.88,因此,可利用该模型预测地震诱发的崩塌滑坡的分布。     

Experimental study of aeolian sand ripples in a wind tunnel

The topographic parameters and propagation velocity of aeolian sand ripples reflect complex erosion, transport, and deposition processes of sand on the land surface. In this study, three Nikon cameras located in the windward (0–1 m), middle (4.5–5.5 m), and downwind (9–10 m) zones of a 10 m long sand bed are used to continuously record changes in sand ripples. Based on the data extracted from these images, this study reaches the following conclusions. (1) The initial formation and full development times of sand ripples over a flatbed decrease with wind velocity. (2) The wavelengths of full development sand ripples are approximately twice the wavelengths of initially formed sand ripples. Both wavelengths increase linearly with friction velocity. During the developing stage of sand ripples, the wavelength increases linearly with time. (3) The propagation velocity of full development sand ripples is approximately 0.6 times that of the initially formed sand ripples. The propagation velocity of both initial and full development of sand ripples increase as power functions with respect to friction velocity. During the developing stage of sand ripples, the propagation velocity decreases with time following a power law. These results provide new information for understanding the formation and evolution of aeolian sand ripples and help improve numerical simulations. Copyright © 2017 John Wiley & Sons, Ltd.     

An approach for shake table performance evaluation during repair and retrofit actions

Large‐scale, servo‐hydraulic shake tables are a central fixture of many earthquake engineering and structural dynamics laboratories. Wear and component failure from frequent use may lead to control problems resulting in reduced motion fidelity, necessitating repairs and replacement of major components. This paper presents a methodology to evaluate shake table performance pre‐ and post‐repair, including the definition of important performance metrics. The strategy suggested is presented in the context of the rebuilding of a 4.9 × 3.1 m, 350‐kN‐capacity uniaxial shake table. In this case, the rebuild consisted of characterization of wear to table components, replacement of worn bearing surfaces, and replacement of hydraulic accumulators. To assess the effectiveness of the repair actions, sinusoidal and triangular waves, white noise, and earthquake histories were run on the table before and after the rebuild. The repair actions were successful in reducing the position and velocity dependence of friction, improving the ability of control algorithms to accurately reproduce earthquake motions. The maximum and average response spectral misfits in the period range of 0.1–2 seconds were reduced from approximately 50% to 15%, and from 5% to less than 2.5%, respectively.     

安徽寿县丁家孤堆遗址自然变形遗迹的发现及特征初探

古遗址、古墓地发掘过程中自然变形现象的识别研究是反演或充实最新构造变形历史记录的重要工作。地震部门会同文物考古部门对安徽寿县丁家孤堆遗址文化层进行宏、微观研究,发现了自然变形痕迹,其主要表现为文化层被砂脉穿切,初步研究显示为地震液化遗迹,发生时代处于龙山晚期至西周时期。研究有助于推动中国东部文化层中地震遗迹的识别。     

Seismic imaging of the middle and upper crust by double-difference tomography: the Haicheng earthquake (Ms 7.3) in Liaoning Province

The Haicheng earthquake (Ms 7.3) occurred in Liaoning Province (39°N–43°N, 120°E–126°E ), China on February 4, 1975. The mortality rate was only 0.02% owing to the first timely and accurate prediction, although the area affected by the earthquake was 9200 km² and covered cities with a population density of 1000 p/km². In this study, the doubledifference (DD) tomography method was used to obtain high-resolution three-dimensional (3D) P- and S-wave velocity (Vp and Vs) structures and Vp/Vs as well as the earthquake locations. Tomography results suggest that velocity structure at shallow depth coincides well with topography and sediment thickness. The earthquake locations form a northwest-striking zone associated with the Jinzhou(JZ) Fault and a northeast-striking zone associated with the Haichenghe-Dayanghe (HD) Fault, and suggest that the JZ Fault consists of three faults and the Ms 7.3 Haicheng earthquake originated at the intersection of the JZ and the Faults. Lowvelocity zones (LVZs) with low Vp/Vs are observed at 15–20 km depth beneath the Haicheng (HC) region. We interpret the LVZs in the middle crust as regions of fluids, suggesting rock dehydration at high temperatures. The LVZs and low Vp/Vs in the upper crust are attributed to groundwater-filled cracks and pores. We believe that large crustal earthquakes in this area are caused by the combination of faulting and fluid movement in the middle crust.     

Model tests on XCC-piled embankment under dynamic train load of high-speed railways

Piled embankments, which offer many advantages, are increasingly popular in construction of high-speed railways in China. Although the performance of piled embankment under static loading is well-known, the behavior under the dynamic train load of a high-speed railway is not yet understood. In light of this, a heavily instrumented piled embankment model was set up, and a model test was carried out, in which a servo-hydraulic actuator outputting M-shaped waves was adopted to simulate the process of a running train. Earth pressure, settlement, strain in the geogrid and pile and excess pore water pressure were measured. The results show that the soil arching height under the dynamic train load of a high-speed railway is shorter than under static loading. The growth trend for accumulated settlement slowed down after long-term vibration although there was still a tendency for it to increase. Accumulated geogrid strain has an increasing tendency after long-term vibration. The closer the embankment edge, the greater the geogrid strain over the subsoil. Strains in the pile were smaller under dynamic train loads, and their distribution was different from that under static loading. At the same elevation, excess pore water pressure under the track slab was greater than that under the embankment shoulder.     

Rupture model of the 2013 M_W 6.6 Lushan (China) earthquake constrained by a new GPS data set and its effects on potential seismic hazard

Vertical records are critically important when determining the rupture model of an earthquake, especially a thrust earthquake. Due to the relatively low fitness level of near-field vertical displacements, the precision of previous rupture models is relatively low, and the seismic hazard evaluated thereafter should be further updated. In this study, we applied three-component displacement records from GPS stations in and around the source region of the 2013 MW6.6 Lushan earthquake to re-investigate the rupture model.To improve the resolution of the rupture model, records from both continuous and campaign GPS stations were gathered, and secular deformations of the GPS movements were removed from the records of the campaign stations to ensure their reliability. The rupture model was derived by the steepest descent method(SDM), which is based on a layered velocity structure. The peak slip value was about 0.75 m, with a seismic moment release of 9.89 × 10~(18) N·m, which was equivalent to an M_W6.6 event. The inferred fault geometry coincided well with the aftershock distribution of the Lushan earthquake. Unlike previous rupture models, a secondary slip asperity existed at a shallow depth and even touched the ground surface. Based on the distribution of the co-seismic ruptures of the Lushan and Wenchuan earthquakes, post-seismic relaxation of the Wenchuan earthquake, and tectonic loading process, we proposed that the seismic hazard is quite high and still needs special attention in the seismic gap between the two earthquakes.     

Mesozoic mafic magmatism in North China: Implications for thinning and destruction of cratonic lithosphere

The North China Craton (NCC) has been thinned from >200 km to <100 km in its eastern part. The ancient subcontinental lithospheric mantle (SCLM) has been replaced by the juvenile SCLM in the Meoszoic. During this period, the NCC was destructed as indicated by extensive magmatism in the Early Cretaceous. While there is a consensus on the thinning and destruction of cratonic lithosphere in North China, it has been hotly debated about the mechanism of cartonic destruction. This study attempts to provide a resolution to current debates in the view of Mesozoic mafic magmatism in North China. We made a compilation of geochemical data available for Mesozoic mafic igneous rocks in the NCC. The results indicate that these mafic igneous rocks can be categorized into two series, manifesting a dramatic change in the nature of mantle sources at ~121 Ma. Mafic igneous rocks emplaced at this age start to show both oceanic island basalts (OIB)-like trace element distribution patterns and depleted to weakly enriched Sr-Nd isotope compositions. In contrast, mafic igneous rocks emplaced before and after this age exhibit both island arc basalts (IAB)-like trace element distribution patterns and enriched Sr-Nd isotope compositions. This difference indicates a geochemical mutation in the SCLM of North China at ~121 Ma. Although mafic magmatism also took place in the Late Triassic, it was related to exhumation of the deeply subducted South China continental crust because the subduction of Paleo-Pacific slab was not operated at that time. Paleo-Pacific slab started to subduct beneath the eastern margin of Eruasian continent since the Jurrasic. The subducting slab and its overlying SCLM wedge were coupled in the Jurassic, and slab dehydration resulted in hydration and weakening of the cratonic mantle. The mantle sources of ancient IAB-like mafic igneous rocks are a kind of ultramafic metasomatites that were generated by reaction of the cratonic mantle wedge peridotite not only with aqueous solutions derived from dehydration of the subducting Paleo-Pacific oceanic crust in the Jurassic but also with hydrous melts derived from partial melting of the subducting South China continental crust in the Triassic. On the other hand, the mantle sources of juvenile OIB-like mafic igneous rocks are also a kind of ultramafic metasomatites that were generated by reaction of the asthenospheric mantle underneath the North China lithosphere with hydrous felsic melts derived from partial melting of the subducting Paleo-Pacific oceanic crust. The subducting Paleo-Pacific slab became rollback at ~144 Ma. Afterwards the SCLM base was heated by laterally filled asthenospheric mantle, leading to thinning of the hydrated and weakened cratonic mantle. There was extensive bimodal magmatism at 130 to 120 Ma, marking intensive destruction of the cratonic lithosphere. Not only the ultramafic metasomatites in the lower part of the cratonic mantle wedge underwent partial melting to produce mafic igneous rocks showing negative ε_Nd(t) values, depletion in Nb and Ta but enrichment in Pb, but also the lower continent crust overlying the cratonic mantle wedge was heated for extensive felsic magmatism. At the same time, the rollback slab surface was heated by the laterally filled asthenospheric mantle, resulting in partial melting of the previously dehydrated rocks beyond rutile stability on the slab surface. This produce still hydrous felsic melts, which metasomatized the overlying asthenospheric mantle peridotite to generate the ultramafic metasomatites that show positive ε_Nd(t) values, no depletion or even enrichment in Nb and Ta but depletion in Pb. Partial melting of such metasomatites started at ~121 Ma, giving rise to the mafic igneous rocks with juvenile OIB-like geochemical signatures. In this context, the age of ~121 Ma may terminate replacement of the ancient SCLM by the juvenile SCLM in North China. Paleo-Pacific slab was not subducted to the mantle transition zone in the Mesozoic as revealed by modern seismic tomography, and it was subducted at a low angle since the Jurassic, like the subduction of Nazca Plate beneath American continent. This flat subduction would not only chemically metasomatize the cratonic mantle but also physically erode the cratonic mantle. Therefore, the interaction between Paleo-Pacific slab and the cratonic mantle is the first-order geodynamic mechanism for the thinning and destruction of cratonic lithosphere in North China.     

Subduction and retreating of the western Pacific plate resulted in lithospheric mantle replacement and coupled basin-mountain respond in the North China Craton

The North China Craton (NCC) witnessed Mesozoic vigorous tectono-thermal activities and transition in the nature of deep lithosphere. These processes took place in three periods: (1) Late Paleozoic to Early Jurassic (～170 Ma); (2) Middle Jurassic to Early Cretaceous (160–140 Ma); (3) Early Cretaceous to Cenozoic (140 Ma to present). The last two stages saw the lithospheric mantle replacement and coupled basin-mountain response within the North China Craton due to subduction and retreating of the Paleo-Pacific plate, and is the emphasis in this paper. In the first period, the subduction and closure of the Paleo- Asian Ocean triggered the back-arc extension, syn-collisional compression and then post-collisional extension accompanied by ubiquitous magmatism along the northern margin of the NCC. Similar processes happened in the southern margin of the craton as the subduction of the Paleo-Tethys ocean and collision with the South China Block. These processes had caused the chemical modification and mechanical destruction of the cratonic margins. The margins could serve as conduits for the asthenosphere upwelling and had the priority for magmatism and deformation. The second period saw the closure of the Mongol-Okhotsk ocean and the shear deformation and magmatism induced by the drifting of the Paleo-Pacific slab. The former led to two pulse of N-S trending compression (Episodes A and B of the Yanshan Movement) and thus the pre-existing continental marginal basins were disintegrated into sporadically basin and range province by the Mesozoic magmatic plutons and NE-SW trending faults. With the anticlockwise rotation of the Paleo-Pacific moving direction, the subduction-related magmatism migrated into the inner part of the craton and the Tanlu fault became normal fault from a sinistral one. The NCC thus turned into a back-arc extension setting at the end of this period. In the third period, the refractory subcontinental lithospheric mantle (SCLM) was firstly remarkably eroded and thinned by the subduction-induced asthenospheric upwelling, especially those beneath the weak zones (i.e., cratonic margins and the lithospheric Tanlu fault zone). Then a slightly lithospheric thickening occurred when the upwelled asthenosphere got cool and transformed to be lithospheric mantle accreted (～125 Ma) beneath the thinned SCLM. Besides, the magmatism continuously moved southeastward and the extensional deformations preferentially developed in weak zones, which include the Early Cenozoic normal fault transformed from the Jurassic thrust in the Trans-North Orogenic Belt, the crustal detachment and the subsidence of Bohai basin caused by the continuous normal strike slip of the Tanlu fault, the Cenozoic graben basins originated from the fault depression in the Trans-North Orogenic Belt, the Bohai Basin and the Sulu Orogenic belt. With small block size, inner lithospheric weak zones and the surrounding subductions/collisions, the Mesozoic NCC was characterized by (1) lithospheric thinning and crustal detachment triggered by the subduction-induced asthenospheric upwelling. Local crustal contraction and orogenesis appeared in the Trans-North Orogenic Belt coupled with the crustal detachment; (2) then upwelled asthenosphere got cool to be newly-accreted lithospheric mantle and crustal grabens and basin subsidence happened, as a result of the subduction zone retreating. Therefore, the subduction and retreating of the western Pacific plate is the outside dynamics which resulted in mantle replacement and coupled basin-mountain respond within the North China Craton. We consider that the Mesozoic decratonization of the North China Craton, or the Yanshan Movement, is a comprehensive consequence of complex geological processes proceeding surrounding and within craton, involving both the deep lithospheric mantle and shallow continental crust.     

Impact of anthropogenic drivers on subaqueous topographical change in the Datong to Xuliujing reach of the Yangtze River

Changes of subaqueous topography in shallow offshore water pose safety risks for embankments,navigation,and ports.This study conducted measurements of subaqueous topography between Datong and Xuliujing in the Yangtze River using a Sea Bat 7125 multi-beam echo sounder,and the channel change from 1998 to 2013 was calculated using historical bathymetry data.The study revealed several important results:(1)the overall pattern of changes through the studied stretch of the river was erosion–deposition–erosion.Erosion with a volume 700×10~6m~3occurred in the upper reach,deposition of about 204×10~6m~3occurred in the middle reach,and erosion of about 602×10~6m~3occurred in the lower reach.(2)Dunes are the most common microtopographic feature,accounting for 64.3%of the Datong to Xuliujing reach,followed by erosional topography and flat river topography,accounting for 27.6%and 6.6%,respectively.(3)Human activities have a direct impact on the development of the microtopography.For instance,the mining of sand formed holes on the surface of dunes with lengths of 20–35 m and depths of 3–5 m.We concluded that the overall trend of erosion(net erosion volume of 468×10~6m~3)occurred in the study area mainly because of the decreased sediment discharge following the closure of the Three Gorges Dam.However,other human activities were also impact factors of topographic change.Use of embankments and channel management reduced channel width,restricted river meandering,and exacerbated the erosion phenomenon.