Study on the selection of unsaturated flow model for the different types of soil and soft rock

Precise estimation of unsaturated hydraulic properties of porous media is indispensable in various study areas, such as analyzing the moisture flow, the drying process occurring from the surface, and the pollutant migration beneath the ground surface. Although many empirical/theoretical models describing the unsaturated hydraulic properties have been proposed by several previous researchers, the best model for the different types of soil/rock may not be identical. Thus, the model selection process and the estimation technique of the parameters included in the models should be developed. In the present study, the inverse technique based on the transient evaporation change was investigated to select the model and estimate the model parameters. The experimental work was based on a relatively low permeable soft rock and a relatively high permeable sandy soil (Toyoura standard sand). Experimental equipment was developed to precisely measure the evaporation rate for the high permeable sandy soil. The Genetic Algorithm (GA) was adopted in the inverse technique as an optimization tool. In order to simplify the problem, only the drying process from the saturated condition was considered. It was established that the information concerning the transient evaporation change could be used for the model selection and parameter estimation. Further, the saturation distribution could be used for the selection of the models. The present study provides important information for the development of the model selection process.     

Evaluation of image processing methods for geological interpretation in the different environments in Libya

This study evaluates the use of image processing techniques and methodologies of digital integration of multi-disciplinary geoscientific data to reduce the ambiguity in geological interpretations in different geological environments in Libya. To realize this objective, three areas were selected for this study; Eljufra, an arid environment; the mountainous environment Tarhunah; and the Jifara Plain, a coastal plain environment. Two types of remote sensing data were used in this study: Landsat Enhanced Thematic Mapper Plus (ETM+) and European Remote Sensing Satellite. The digital elevation model extracted from Shuttle Radar Topography Mission and digital topographic maps scale 1:50,000 were used for remote sensing interpretation. GIS and remote sensing-based methods were used to process and integrate all raster and vector layers data. This study offered dramatic benefits for geological interpretations and provided new insights into the efficiency of image processing methods in different geological environments.     

Phytoplankton productivity in the western subarctic gyre of the North Pacific in early summer 2006

We deployed a profiling buoy system incorporating a fast repetition rate fluorometer in the western subarctic Pacific and carried out time-series observations of phytoplankton productivity from 9 June to 15 July 2006. The chlorophyll a (Chl a) biomass integrated over the euphotic layer was as high as 45–50 mg Chl a m⁻² in the middle of June and remained in the 30–40 mg Chl a m⁻² range during the rest of observation period; day-to-day variation in Chl a biomass was relatively small. The daily net primary productivity integrated over the euphotic layer ranged from 144 to 919 mg C m⁻² day⁻¹ and varied greatly, depending more on insolation rather than Chl a biomass. In addition, we found that part of primary production was exported to a 150-m depth within 2 days, indicating that the variations in primary productivity quickly influenced the organic carbon flux from the upper ocean. Our results suggest that the short-term variability in primary productivity is one of the key factors controlling the carbon cycle in the surface ocean in the western subarctic Pacific.     

Formation Process of Zircon Associated with REE‐Fluorocarbonate and Niobium Minerals in the Nechalacho REE Deposit,Thor Lake,Canada

The two drill holes, which penetrated sub‐horizontal rare earth element (REE) ore units at the Nechalacho REE in the Proterozoic Thor Lake syenite, Canada, were studied in order to clarify the enrichment mechanism of the high‐field‐strength elements (HFSE: Zr, Nb and REE). The REE ore units occur in the albitized and potassic altered miaskitic syenite. Zircon is the most common REE mineral in the REE ore units, and is divided into five types as follows: Type‐1 zircon occurs as discrete grains in phlogopite, and has a chemical character similar to igneous zircon. Type‐2 zircon consists of a porous HREE‐rich core and LREE–Nb–F‐rich rim. Enrichment of F in the rim of type‐2 zircon suggests that F was related to the enrichment of HFSE. The core of type‐2 zircon is regarded to be magmatic and the rim to be hydrothermal in origin. Type‐3 zircon is characterized by euhedral to anhedral crystals, which occur in a complex intergrowth with REE fluorocarbonates. Type‐3 zircon has high REE, Nb and F contents. Type‐4 zircon consists of porous‐core and ‐rim, but their chemical compositions are similar to each other. This zircon is a subhedral crystal rimmed by fergusonite. Type‐5 zircon is characterized by smaller, porous and subhedral to anhedral crystals. The interstices between small zircon grains are filled by fergusonite. Type‐4 and type‐5 zircon grains have low REE, Nb and F contents. Type‐1 zircon is only included in one unit, which is less hydrothermally altered and mineralized. Type‐2 and type‐3 zircon grains mainly occur in the shallow units, while those of type‐4 and type‐5 are found in the deep units. The deep units have high HFSE contents and strongly altered mineral textures (type‐4 and type‐5) compared to the shallow units. Occurrences of these five types of zircon are different according to the depth and degree of the hydrothermal alteration by solutions rich in F and CO₃, which permit a model for the evolution of the zircon crystallization in the Nechalacho REE deposit as follows: (i) type‐1 (discrete magmatic zircon) is formed in miaskitic syenite. (ii) LREE–Nb–F‐rich hydrothermal zircon formed around HREE‐rich magmatic zircon (type‐2). (iii) type‐3 zircon crystallized through the F and CO₃‐rich hydrothermal alteration of type‐2 zircon which formed the complex intergrowth with REE fluorocarbonates; (iv) the CO₃‐rich hydrothermal fluid corroded type‐3, forming REE–Nb‐poor zircon (type‐4). Niobium and REE were no longer stable in the zircon structure and crystallized as fergusonite around the REE–Nb‐leached zircon (type‐4); (v) type‐5 zircon is formed by the more CO₃‐rich hydrothermal alteration of type‐4 zircon, suggested by the fact that type‐4 and type‐5 zircon grains are often included in ankerite. Type‐3 to type‐5 zircon grains at the Nechalacho REE deposit were continuously formed by leaching and/or dissolution of type‐2 zircon in the presence of F‐ and/or CO₃‐rich hydrothermal fluid. These mineral associations indicate that three representative hydrothermal stages were present and related to HFSE enrichment in the Nechalacho REE deposit: (i) F‐rich hydrothermal stage caused the crystallization of REE–Nb‐rich zircon (type‐2 rim and type‐3), with abundant formation of phlogopite and fluorite; (ii) F‐ and CO₃‐rich hydrothermal stage led to the replacement of a part of REE–Nb–F‐rich zircon by REE fluorocarbonate; and (iii) CO₃‐rich hydrothermal stage resulted in crystallization of the REE–Nb–F‐poor zircon and fergusonite, with ankerite. REE and Nb in hydrothermal fluid at the Nechalacho REE deposit were finally concentrated into fergusonite by way of REE–Nb–F‐rich zircon in the hydrothermally altered units.     

Mercury concentration in some calcareous soils of western Iran with a focus on pedological evolution and weathering process

The aim of this study was to evaluate total mercury concentration and its lithogenic and exogenic fractions in some calcareous soils of western Iran, where water contamination and bioaccumulation of mercury have been reported in the bottomland’s reservoir. In particular, we investigated soil physico-chemical properties and weathering conditions related to lithogenic and exogenic fractions of mercury for two groups of calcareous soils with a known comparative pedological evolution and weathering condition that was evident in the presence or absence of underlying layers of accumulated clay. Our results showed that the total mercury content of the studied soils ranged from 45.40 to 830.36 with a mean of 486.81 μg kg^?1. Furthermore, calculation of mercury fractions revealed that lithogenic and exogenic fractions vary slightly according to the three reference elements (Fe, U and Nb) used in the calculations for the two groups of studied soils. The results also illustrated that most of the mercury content is of exogenic origin; therefore, total mercury variations are closely related to the content of exogenic mercury, while the lithogenic fraction exhibited no relationship with total mercury concentration. Moreover, application of the weathering indexes of Parker and the CaO/ZrO₂ molar ratio supported the dependence of lithogenic mercury accumulation on weathering intensity in the studied calcareous soils. However, the significance of this relationship is stronger for more weathered calcareous soils; in such cases, fine-particle fractions are more developed, which encourages carrier phases such as organic materials and iron oxyhydroxides to become involved in more efficient fixation of mercury. Nevertheless, the formation of underlying layers of accumulated clay, i.e. argillic horizons, may restrain fixation of exogenic mercury by limiting its atmospheric input.     

The Wide Band Spectrometer on the SOLAR-A

The SOLAR-A spacecraft has spectroscopic capabilities in a wide energy band from soft X-rays to gamma-rays. The Wide Band Spectrometer (WBS), consisting of three kinds of spectrometers, soft X-ray spectrometer (SXS), hard X-ray spectrometer (HXS) and gamma-ray spectrometer (GRS), is installed on SOLAR-A to investigate plasma heating, high-energy particle acceleration, and interaction processes. SXS has two proportional counters and each counter provides 128-channel pulse height data in the 2–30 keV range every 2 s and 2-channel pulse count data every 0.25 s. HXS has a NaI scintillation detector and provides 32-channel pulse height data in the 20–400 keV range every 1 s and 2-channel pulse count data every 0.125 s. GRS has two identical BGO scintillation detectors and each detector provides 128-channel pulse height data in the 0.2–10 MeV range every 4 s and 4-channel pulse count data (0.2–0.7, 0.7–4, 4–7, and 7–10 MeV) every 0.25–0.5 s. In addition, each of the BGO scintillation detectors provides 16-channel pulse height data in the 8–100 MeV range every 4 s and 2-channel pulse count data (8–30 and 30–100 MeV) every 0.5 s. The SXS observations enable one to study the thermal evolution of flare plasma by obtaining time series of electron temperatures and emission measures of hot plasma; the HXS observations enable one to study the electron acceleration and heating mechanisms by obtaining time series of the electron spectrum; and the GRS observations enable one to study the high-energy electron and ion acceleration and interaction processes by obtaining time series of electron and ion spectra.After the launch the name of SOLAR-A has been changed to YOHKOH.