Shear strength characterization of municipal solid waste at the Suzhou landfill, China

The current practice of slope stability analysis for a municipal solid waste (MSW) landfill usually overlooks the dependence of waste properties on the fill age or embedment depth. Changes in shear strength of MSW as a function of fill age were investigated by performing field and laboratory studies on the Suzhou landfill in China. The field study included sampling from five boreholes advanced to the bottom of the landfill, cone penetration tests and monitoring of pore fluid pressures. Twenty-six borehole samples representative of different fill ages (0 to 13 years) were used to perform drained triaxial compression tests. The field and laboratory study showed that the waste body in the landfill can be sub-divided into several strata corresponding to different ranges of fill age. Each of the waste strata has individual composition and shear strength characteristics. The triaxial test results showed that the MSW samples exhibited a strain-hardening and contractive behavior. As the fill age of the waste increased from 1.7 years to 11 years, the cohesion mobilized at a strain level of 10% was found to decrease from 23.3 kPa to 0 kPa, and the mobilized friction angle at the same strain level increasing from 9.9° to 26°. For a confinement stress level greater than 50 kPa, the shear strength of the recently-placed MSW seemed to be lower than that of the older MSW. This behavior was consistent with the cone penetration test results. The field measurement of pore pressures revealed a perched leachate mound above an intermediate cover of soils and a substantial leachate mound near the bottom of the landfill. The measurements of shear strength properties and pore pressures were utilized to assess the slope stability of the Suzhou landfill.     

Numerical estimation of REV and permeability tensor for fractured rock masses by composite element method

The Monte Carlo method is used to generate parent stochastic discrete fracture network, from which a series of fractured rock samples of different sizes and orientations are extracted. The fracture network combined with a regular grid forms composite element mesh of the fractured rock sample, in which each composite element is composed of sub‐elements incised by fracture segments. The composite element method (CEM) for the seepage is implemented to obtain the nodal hydraulic potential as well as the seepage flow rates through the fractured rock samples. The application of CEM enables a large quantity of stochastic tests for the fractured rock samples because the pre‐process is facilitated greatly. By changing the sizes and orientations of the samples, the analysis of the seepage characteristics is realized to evaluate the variation of the permeability components, the existence of the permeability tensor and the representative element volume. The feasibility and effectiveness are illustrated in a numerical example. Copyright © 2008 John Wiley & Sons, Ltd.     

Biaxial test simulations using a packing of polygonal particles

The mechanical response of cohesionless granular materials under monotonic loading is studied by performing molecular dynamic simulations. The diversity of shapes of soil grains is modelled by using randomly generated convex polygons as granular particles. Results of the biaxial test obtained for dense and loose media show that samples achieve the same void ratio at large strains independent of their initial density state. This limit state resembles the so‐called critical state of soil mechanics, except for some stress fluctuations, which remain for large deformations. These fluctuations are studied at the micro‐mechanical level, by following the evolution of the co‐ordination number, force chains and the fraction of the sliding contacts of the sample. Copyright © 2007 John Wiley & Sons, Ltd.     

Flexural isostatic response of the Alps to increased Quaternary erosion recorded by foreland basin remnants,SE France

We test the hypothesis that flexural isostatic compensation of the mass removed by enhanced Quaternary erosion is responsible for uplift of the Western European Alps and their forelands. We use two well‐preserved and well‐dated (1.8 Ma) abandonment surfaces of foreland basin remnants in SE France (the Chambaran and Valensole plateaux) as passive benchmarks for tilting of the foreland. Estimating their initial slope from morphometric scaling relationships, we determine bulk post‐depositional tilting of 0.5–0.8% for these surfaces. The calculated isostatic response of the Alpine lithosphere to erosional unloading, using the method recently proposed by Champagnac et al. [Geology 35 (2007) 195–198] , yields a predicted tilting of 0.3–0.4% in the considered areas, explaining approximately half of the determined post‐depositional tilting. Such long‐term deformation being insensitive to cyclic loading/unloading because of glaciations, we suspect the other half to be related to as yet undetermined long‐wavelength and long‐lived tectonic process(es).     

鲁中南隆起区第四纪晚期断裂活动特征

根据野外调查，并综合前人的研究资料，对鲁中南地区第四纪晚期断裂活动进行了分析，研究表明，鲁中南隆起区第四纪断裂活动具有时空不均匀性，主要表现为第四纪时期断层活动强度变化和断裂活动的群集性以及第四纪晚期断裂活动段分布的局限性上。对于鲁中南地区而言，活动断层可以分为中更新世中期（500kaBP)至晚更新世初期（90kaBP)活断层和晚更新世中、晚期至全新世早期活断层两类；其中前一类（主要是中更新世断裂）断裂数量较多，分布较为广泛，而晚更新世晚期以来的活动断裂段的数量较少，分布较局限。它们对地震的控制能力不同，前者可控制5．5级左右的地震，而后一类可控制6－7级地震的发生。     

低风速下海面附近气温场对海气动量通量的影响

实用测的海上和层平均风剖面数据和温度剖面数据，通过数据回归和迭代方法计算出了在不同大气稳定情况下的海面阻力系数。得到了与前人理论计算一致的结论：海面阻力系数随海面大气稳定度的增加而减小，另外，我们还发现：在海面风速小于１３ｍ／ｓ时，不能认为气温剖面外推到海面的值与海面水温的是一致的。这样若用海气温差作为衡量海面上方大气的稳定程度，难于得到上面给出了理结论。这一点同前人的理论计算结果是不相同的。     

东亚温带气旋及其长期预报（二）：预报应用分析

本文以赤道东太平洋海温作为主导因子，分析其与东亚温带气旋的关系。得出：高海温多气旋，低海温少气旋的对应关系较为明显。并进一步对不符合这种主要关系的年份从环流型。下垫面海温等作了分类鉴别分析。     

海洋石油管道单点提升分析

基于管道微单元体平衡建立了海管单点提升的非线性力学模型的控制微分方程组 ,使用变弧长的无量纲代换将动边界问题化为固定边界的两点边值问题 ,利用Maple环境下编制的两点边值问题的打靶法程序得到了该问题在各个提升阶段的数值解答和在单点提升过程中管道的极限弯矩约为 0 .71q1 3(EI) 2 3。