Landslide susceptibility assessment along the southern coast of the Caspian Sea,Iran

China is a disaster-prone country, and these disasters have diverse characteristics, a wide scope of distribution, high frequency, and large losses. China has advanced community-based disaster management (CBDM) capacity. Community is the bottom unit of the society, and CBDM is the foundation of the entire society’s disaster management system. A series of domestic major emergency incidents and disasters and international disaster reduction activities have promoted the formation of the CBDM concept, the implementation of capacity building activities, and the improvement of policy and laws. Thus far, the CBDM system has been preliminarily formed in China, and relevant rules and regulations have been promulgated and implemented. Furthermore, disaster reduction activities, such as the construction of the national comprehensive disaster reduction community and national safe community, have been promoted nationwide. As a result, China’s disaster-resistance capacity has largely improved. However, it is only in the initial phase of CBDM implementation, which remains plagued by several challenges and problems, such as the deficiency of community resident participation, management organizations, disaster risk assessment methods, NGO development, and safety culture cultivation.     

A study of differentiation pattern and rare earth elements migration in geochemical and hydrogeochemical environments of Airekan and Cheshmeh Shotori areas (Central Iran)

The Airekan and Cheshmeh Shotori areas are located about 60 km northeast of Khour, in Isfahan province from Central Iran. Research on characteristics and rare earth elements (REE) pattern in hydrogeochemical environments of these areas suggests the same origin for the elements dissolved in groundwater in these areas. Investigation of migration pattern of REE in hydrogeochemical environments shows that the migration and transportation of REE has occurred through chloride complexes. REEs, leached by water/rock interaction from the Airekan granite, are transported by groundwater and then precipitated in the Cheshmeh Shotori area. Study of the Cheshmeh Shotori sediments shows the presence of a sequence of red oxidized and dark layers. Geochemical characteristics of these sediments reveal that their REE characteristics are mainly inherited from the Airekan granite. Changes in the REE pattern of these sediments with depth show that changes in oxidation and reduction process have not played a significant role in controlling their behavior. It is crucial to note that adsorption of REEs dissolved in water by hydrosilicate increases these elements in depth. The REE behavior shows water/rock interaction between the granitic rocks and groundwater as the main factor of solution, migration and precipitation of REEs in the Cheshmeh Shotori area.     

Subsurface structural trends of the offshore Nile Delta area, Egypt: evidences from gravity and magnetic data

Subsurface structural trends and tectonics affecting the offshore Nile Delta area, Egypt, have been studied through the interpretations of gravity and magnetic data. Reduced to the pole, regional–residual separation, Tilt derivative and Euler deconvolution techniques are applied for the processing and interpretations of the magnetic and gravity data. The average depth of the sedimentary cover, estimated from the two-dimensional power spectrum technique ranges between 8 km and 13 km. The interpretation of the gravity and magnetic data indicates that the study area is affected by many subsurface structural trends. The NW–SE is the major trend related to El-Temsah and Misfaq-Bardwil trend. The NE–SW direction is the second dominant trend, related to the Rosetta trend. Other trends defined through the interpretation of gravity and magnetic data include: the N–S direction, related to the Baltim fault trend, the E–W direction, related to the Neogene hinge line and the NNE–SSW related to the Gulf of Aqaba. Accessory trends include the ENE–WSW, WNW–ESE and finally the NNW–SSW.     

Vertical geochemical variations and arsenic mobilization in the shallow alluvial aquifers of the Chapai-Nawabganj District, northwestern Bangladesh: implication of siderite precipitation

Core sediments from three disturbed boreholes (JOR, GHAT, and RAJ) and two undisturbed boreholes (DW1 and DW2) were collected in the study area of the Chapai-Nawabganj district of northwestern Bangladesh for geochemical analyses. In the study area, groundwater samples from fourteen As-contained private wells and five nested piezometers at both the DW1 and DW2 boreholes were also collected and analyzed. The groundwater arsenic concentrations in the uppermost aquifer (10–40 m of depth) range from 3 to 315 μg/L (mean 47.73 ± 73.41 μg/L), while the arsenic content in sediments range from 2 to 14 mg/kg (mean 4.36 ± 3.34 mg/kg). An environmental scanning electron microscope (ESEM) with an energy dispersive X-ray spectrometer was used to investigate the presence of major and trace elements in the sediments. Groundwaters in the study area are generally the Ca–HCO₃ type with high concentrations of As, but low levels of Fe, Mn, NO₃ ^? and SO ₄ ^?2 . The concentrations of As, Fe, Mn decrease with depth in the groundwater, showing vertical geochemical variations in the study area. Statistical analysis clearly shows that As is closely associated with Fe and Mn in the sediments of the JOR core (r = 0.87, p < 0.05 for Fe and r = 0.78, p < 0.05 for Mn) and GHAT core (r = 0.95, p < 0.05 for Fe and r = 0.93, p < 0.05 for Mn), while As is not correlated with Fe and Mn in groundwater. The comparatively low Fe and Mn concentrations in some groundwater and the ESEM image revealed that siderite precipitated as a secondary mineral on the surface of the sediment particles. The correlations along with results of sequential extraction experiments indicated that reductive dissolution of FeOOH and MnOOH represents a mechanism for releasing arsenic into the groundwater.     

Simple formulas for the dynamic stiffness of pile groups

Simple formulas are derived for the dynamic stiffness of pile group foundations subjected to horizontal and rocking dynamic loads. The formulations are based on the construction of a general model of impedance matrices as the condensation of matrices of mass, damping, and stiffness, and on the identification of the values of these matrices on an extensive database of numerical experiments computed using coupled finite element–boundary element models. The formulations obtained can be readily used for the design of both floating piles on homogeneous half‐space and end‐bearing piles and are applicable for a wide range of mechanical and geometrical parameters of the soil and piles, in particular for large pile groups. For the seismic design of a building, the use of the simple formulas rather than a full computational model is shown to induce little error on the evaluation of the response spectra and time histories. Copyright © 2009 John Wiley & Sons, Ltd.     

Antenna design and implementation for the future space Ultra-Long wavelength radio telescope

In radio astronomy, the Ultra-Long Wavelengths (ULW) regime of longer than 10 m (frequencies below 30 MHz), remains the last virtually unexplored window of the celestial electromagnetic spectrum. The strength of the science case for extending radio astronomy into the ULW window is growing. However, the opaqueness of the Earth’s ionosphere makes ULW observations by ground-based facilities practically impossible. Furthermore, the ULW spectrum is full of anthropogenic radio frequency interference (RFI). The only radical solution for both problems is in placing an ULW astronomy facility in space. We present a concept of a key element of a space-borne ULW array facility, an antenna that addresses radio astronomical specifications. A tripole–type antenna and amplifier are analysed as a solution for ULW implementation. A receiver system with a low power dissipation is discussed as well. The active antenna is optimized to operate at the noise level defined by the celestial emission in the frequency band 1 ? 30 MHz. Field experiments with a prototype tripole antenna enabled estimates of the system noise temperature. They indicated that the proposed concept meets the requirements of a space-borne ULW array facility.     

Prediction of riverine suspended sediment discharge using fuzzy logic algorithms, and some implications for estuarine settings

The ability of fuzzy logic algorithms to model relationships between stream flow and suspended sediment discharge was investigated using daily measurements of stream flow and suspended sediment discharge for the Escanaba River mouth station, situated on the shore of Lake Michigan and operated by the US Geological Survey. Three different configurations of inputs were applied, whereby the inputs were fuzzified into fuzzy subsets of variables by means of triangular membership functions. The relationships between inputs and suspended sediment discharge (output) were represented by a set of fuzzy rule expressed in IF–THEN format. The weighted average method served for defuzzification. The commonly used sediment rating curve was also applied to the data, and its performance compared with that of the three models by means of statistical analyses. For all three models, suspended sediment discharge predicted by the fuzzy logic algorithm was in satisfactory agreement with observations. Furthermore, the fuzzy logic algorithms performed better than the sediment rating curve, particularly at higher rates of suspended sediment discharge (in this study, more than 50  × 10⁶ g/day). Considered collectively, the use of fuzzy logic algorithms is suggested as a simple and effective approach for better prediction of suspended sediment discharge, also for estuaries.     

Numerical Prediction of Induced Pressure and Lift of the Planing Surfaces

This paper discusses the numerical prediction of the induced pressure and lift of the planing surfaces in a steady motion based on the potential flow solver as well as the spray drag by use of the practical method.The numerical method for computation of the induced pressure and lift is potential-based boundary element method.Special technique is identified to present upwash geometry and to determine the spray drag.Numerical results of a planing flat plate and planing craft model 4666 are presented.It is shown that the method is robust and efficient and the results agree well with the experimental measurements with various Froude humors.     

Geochemical Prospectivity Mapping Through a Feature Extraction–Selection Classification Scheme

Natural Resources Research - Machine learning (ML) schemes can enhance success in geochemical prospectivity mapping. This study has examined the effectiveness of several feature extraction or...     

A GIS‐based multi‐criteria seismic vulnerability assessment using the integration of granular computing rule extraction and artificial neural networks

This study proposes multi‐criteria group decision‐making to address seismic physical vulnerability assessment. Granular computing rule extraction is combined with a feed forward artificial neural network to form a classifier capable of training a neural network on the basis of the rules provided by granular computing. It provides a transparent structure despite the traditional multi‐layer neural networks. It also allows the classifier to be applied on a set of rules for each incoming pattern. Drawbacks of original granular computing (GrC) are covered, where some input patterns remained unclassified. The study was applied to classify seismic vulnerability of the statistical units of the city of Tehran, Iran. Slope, seismic intensity, height and age of the buildings were effective parameters. Experts ranked 150 randomly selected sample statistical units with respect to their degree of seismic physical vulnerability. Inconsistency of the experts' judgments was investigated using the induced ordered weighted averaging (IOWA) operator. Fifty‐five classification rules were extracted on which a neural network was based. An overall accuracy of 88%, κ = 0.85 and R² = 0.89 was achieved. A comparison with previously implemented methodologies proved the proposed method to be the most accurate solution to the seismic physical vulnerability of Tehran.