地震动力分析的经典方法与现代计算技术

回顾了体系地震动力分析的历史过程，并对地震动力分析的传统理论方法、近似方法和现代计算技术从新的角度加以阐述，同时给出体系地震动力分析的应用前景，以促进经典的传统理论方法、近似方法和现代计算技术的综合和在实际工程中的应用，形成系统而完整的地震动力分析体系。     

Research on method of pressure grouting piling of driven tube

The pressure grouting pile of driven tube can improve the load bearing capacity of the single pile from the mechanism of pressure grouting pile of driven tube.On the basis of analyzing the mechanism,the authors designed the machines and tools of pressure grouting,determined the operating manufacture and technology parameter on the pressure grouting secondly.The result shows that the pressure grouting pile of driven tube not only changes the pile type but also reduce the length of the pile and its engineering cost,it enhances the load bearing capacity of single pile an the same time.     

Comparative Analysis of Seismic Response Characteristics of Pile-Soil-Stnicture Interaction System

The study on the earthquake-resistant performance of a pile-soil-structure interaction system is a relatively complicated and primarily important issue in civil engineering practice. In this paper, a computational model and computation procedures for pile-supported structures, which can duly consider the pile-soil interaction effect, are established by the finite element method. Numerical implementation is made in the time domain. A simplified approximation for the seismic response analysis of pile-soil-structure systems is briefly presented. Then a comparative study is performed for an engineering example with numerical results computed respectively by the finite element method and the simplified method. Through comparative analysis, it is shown that the results obtained by the simplified method well agree with those achieved by the finite element method. The numerical results and findings will offer instructive guidelines for earthquake-resistant analysis and design of pile-supported structures.     

Study on drilling mechanism and optimization of percussion-extruding DTH hammer bit

The authors tested the percussion-extruding Down-the-hole （DTH）hammer bit with five different structures and mainly analyzed the drilling mechanism between conical bit and stepped bit. In addition, aiming at ＂the pile effect＂ in combination with the advantage＇ of stepped bit, we design a new cam spinning bit and test it outdoors. The result shows that using cam spinning bit can solve the problem of ＂the pile effect＂, which can also obtain higher drilling efficiency than using conical bit in high confining pressure strata. It is characterized by novel structure and high drilling speed as well as good guiding, and it is significant for improving efficiency in percussion-extruding drilling technique.     

FINDING CAUSES OF OUTLIERS IN MULTIVARIATE ENVIRONMENTAL DATA

Multivariate outliers in environmental data sets are often caused by atypical measurement error in a singlevariable.From a quality assurance perspective it is important to identify these variables efficiently so thatcorrective actions may be performed.We demonstrate a procedure for using two multivariate tests toidentify which variable‘caused’each outlier.The procedure is tested with simulated data sets that havethe same correlation structure as selected water chemistry variables from a survey of lakes in the WesternUnited States.The success rates are evaluated for three of the variables for sample sizes of 50 and 100,significance levels of 0.01 and 0.05 and various amounts of mean shift.The procedure works best forhighly correlated variables.     

Research on ground heat exchanger of Ground Source Heat Pump technique

Ground Source Heat Pump technique and its operating principle are described in this paper. Ground heat exchanger is the key technique of ground source heat pump and its pattems are discussed. Software is helpful to design ground heat exchanger. A project of Chinese Ground Source Heat Pump is introduced and its market is more and more extensive.     

青藏高原多年冻土概论

本文较系统地阐述了青藏高原多年冻土的地带性规律、冻土构造以及融区的类型和分布特征,详细论述了不同作用下形成的冻土(冰缘)地貌,并对青藏高原的冰缘期进行了初步划分与对比。     

湖南有色金属生产矿山扩大接替资源的对策

湖南省境内有色金属矿产十分丰富,享有“有色金属之乡”的美誉,但经过多年的开采,90%以上的矿山都面临储量危机的困难,而找矿难度日益增大,常规的找矿技术路线已很难打开找矿效果不佳的局面。因此,在找矿预测过程中,必须以新的理论为指导,采用新的思路,从新的成矿与控矿因素、新的矿床成因类型与成矿模式入手,结合有效的常规手段与新技术,进行系统而科学的研究,并深入分析前人已有成果和投入大量现场调查研究工作,才有可能实现储量危机矿山找矿预测的突破。     

铜陵凤凰山铜矿区角砾岩特征及其成因分析

凤凰山铜矿区矿体附近不同类型角砾岩的分形统计分析结果表明,其中角砾状花岗闪长岩的形成以化学作用为主,其颗粒大小分布的分维值达到了1．389,说明其在形成过程中经历了机械破裂过程,其破裂过程中的能量达到中等。角砾状矿石和角砾状大理岩均为水力致裂角砾岩,角砾状矿石的颗粒大小分布的分维值(1．526)大于角砾状大理岩(1．24),指示了角砾状矿石形成时的能量大于角砾状大理岩。     

风沙流中沙粒浓度分布的实验研究

利用粒子图像测速技术（PIV）,在风洞内对与天然沙接近的石英沙风沙流沙颗粒浓度沿高度分布进行了研究。对 3种不同轴线风速研究结果表明,风沙流中沙粒浓度沿水平方向基本不变,而随高度呈指数衰减,而且其衰减速率与风速密切相关。风速越大,衰减速率越慢;风速越小,衰减速率越快。风沙运动一旦发生时,靠近沙床表面的沙粒浓度随风速变化很小,可以认为趋于稳定,达到最大值。